Stuart Turner

Centrifugal Horizontal Unit Single Stage The CH single stage range of centrifugal pumps is intended for liquid transfer, pressure boosting or distribution of clean, fresh water. Other clean, non aggressive, non explosive liquids with similar characteristics to water may be pumped.

Centrifugal Horizontal Unit Single Stage The CH single stage range of centrifugal pumps is intended for liquid transfer, pressure boosting or distribution of clean, fresh water. Other clean, non aggressive, non explosive liquids with similar characteristics to water may be pumped.

Universal Twin Monsoon Universal 3.0 Bar. Twin Shower Unit. Intended for setup into vented systems to pump both the hot and cold water supplies boosting both equally. Suitable for both positive and negative head applications.

Centrifugal Horizontal Unit Single Stage Intended to provide a pressurised liquid supply from a break tank in either a positive or negative head application, as it does not rely on gravity flow to activate. The CH 12-14 B is suitable for commercial or domestic use, pumping hot or cold water and supplied with G1 flexible hoses.

Universal Twin Monsoon Universal 2.0 Bar. Twin Unit. Intended for setup into vented systems to pump both the hot and cold water supplies boosting both equally. Suitable for both positive and negative head applications.

Typical Single Unit MONSOON Typical 2.0 bar Single Unit. Can be used in pairs to pump hot and cold water supplies independently, or as a single pump to boost the hot or cold water supply as required. High quality, high performance compact pump supplied with two 15 mm anti-vibration flexible hoses.

Universal Single Monsoon Universal 2.0 Bar. Single Shower Unit. Can be used in pairs to boost vented setups to pump hot and cold water supplies independently, or as a single pump to boost a water supply as required. Suitable for both positive and negative head applications.

Universal Twin Monsoon Universal 1.5 Bar. Twin Shower Unit. Intended for setup into vented systems to pump both the hot and cold water supplies boosting both equally. Suitable for both positive and negative head applications.

Peripheral Horizontal Unit The PH range is particularly appropriate where space is at a premium to pump clean, fresh water. Other clean non aggressive, non explosive liquids with similar characteristics to water may be pumped. Key Product Features Peripheral pump Flow rates up to 34 litres per minute and heads up to 30 metres Top suction, vertical delivery connections Extended life seal Standard control Brass pump head and impeller Continuously rated 2 year warranty

Mains Boost Unit Product Discontinued - replaced by the new STORMBOOST Appropriate for reduced occupancy properties with typically one bathroom. The FLOMATE MBF-12 Pump is designed to be connected directly to the incoming mains and will deliver an additional 1.5 Bar. pressure to the existing mains pressure and a maximum flow rate of 12 litres per minute. The pump will start automatically when a flow rate of 0.6 litres per minute or more exists.

Replacement reed switch suitable for all Monsoon Standard and Monsoon Universal pumps manufactured after 2008. _x000D_ Contents: _x000D_ _x000D_ Reed Switch x1 _x000D_ Strain Relief Bush x1 _x000D_ Tie Wrap x1 _x000D_ Screw Self Tapping 3.5mmx12mm x4 _x000D_ Screw Self Tapping K40x16mm x4 _x000D_

Unit Management Module The Management Module remotely switches pumps without controls and can be used in both positive and negative head plumbing systems. The pump incorporates a pressure switch to start a connected pump and a flow switch to stop the pump, ensuring a continuous supply of boosted water to all outlets without hunting. Incorporating pump run dry protection, the control module features a simple LED display for power on, pump running and fault indication.

L-180mm x W-180mm, Depth 23mm

Manufacturers code: 17682. Branded Stuart Turner Service Kit.

Integrated Booster Setup Inadequate throughput rates and liquid pressure are common shortcomings for many properties, often resulting in underperforming showers and water using appliances. iBOOST offers a solution. These fully integrated systems combine a 200 litre cold water storage tank and a high performance, multi-stage pump to overcome restricted water flow and insufficient pressure. The iBOOST F200 features simple to operate fixed speed controls and is capable of generating pressures of up to 4.5 Bar.

_x000D_ 288 litres per hour max flow _x000D_ Up to 5m head _x000D_ Easy access tank _x000D_ 3 inlet ports _x000D_ Twist and click non-return outlet Bar.b _x000D_ Built in spirit level _x000D_ Wall or floor mounted _x000D_ 2m power cable _x000D_ 6m discharge tube _x000D_ High level cut-out switch _x000D_ BS EN 60335 compliant _x000D_