Stuart Turner

Centrifugal Horizontal Unit multi-stage The STUART CH4-50 centrifugal multi-stage pump is optimal for pressure boosting in applications where long pipe runs or high heads may be involved. CH 4-50 pumps are self priming up to 5 metres and offer a high quality, reliable solution with flow rates up to 160 litres per minute and heads up to 50 metres.

Centrifugal Horizontal Unit multi-stage The CH 4-60 centrifugal multi-stage pump is optimal for pressure boosting in applications where long pipe runs or high heads may be involved. CH 4-60 pumps are self priming up to 5 metres and offer a high quality, reliable solution with flow rates up to 160 litres per minute and heads up to 62 metres.

Replacement reed switch suitable for all Monsoon Standard and Monsoon Universal pumps manufactured after 2008. _x000D_ Contents: _x000D_ _x000D_ Reed Switch x1 _x000D_ Strain Relief Bush x1 _x000D_ Tie Wrap x1 _x000D_ Screw Self Tapping 3.5mmx12mm x4 _x000D_ Screw Self Tapping K40x16mm x4 _x000D_

Spare Part Replacement pressurisation vessel, appropriate for all Monsoon Universal pumps manufactured after 2008. Contents: Pressure Vessel 0.6 Litre (x1) Rubber Washer 1/2" BSP (x1) O-Ring (x1) Key Product Features Genuine Monsoon parts manufactured by Stuart Turner Compatible with Monsoon Universal pumps manufactured after 2008

Unit Management Module The Management Module remotely switches pumps without controls and can be used in both positive and negative head plumbing systems. The pump incorporates a pressure switch to start a connected pump and a flow switch to stop the pump, ensuring a continuous supply of boosted water to all outlets without hunting. Incorporating pump run dry protection, the control module features a simple LED display for power on, pump running and fault indication.

L-180mm x W-180mm, Depth 23mm

Manufacturers code: 17682. Branded Stuart Turner Service Kit.

Integrated Booster Setup Inadequate throughput rates and liquid pressure are common shortcomings for many properties, often resulting in underperforming showers and water using appliances. iBOOST offers a solution. These fully integrated systems combine a 200 litre cold water storage tank and a high performance, multi-stage pump to overcome restricted water flow and insufficient pressure. The iBOOST F200 features simple to operate fixed speed controls and is capable of generating pressures of up to 4.5 Bar.

Support Kit This comprehensive Support Kit is appropriate for all Monsoon Standard pumps manufactured after 2008. If your pump is older than this please contact TechAssist on +44 (0) 800 31 969 80.

Support Kit This comprehensive Support Kit is appropriate for all Monsoon Universal pumps manufactured after 2008. If your pump is older than this please contact TechAssist on +44 (0) 800 31 969 80. Contents: Printed Circuit Board (x1) Motor Capacitor 5uF (x1) Motor Capacitor 7uF (x1) Motor Capacitor 10uF (x1) Motor Capacitor 12uF (x1) Inlet Strainer (x2) Rotary Seal Assembly (x2) Seal Counterface (x2) Seal Applicator Tool (x1) Pressure Vessel (x1) Pressure Switch 1 Bar.

Jet Unit Optimal for the elevated pressure delivery of clean non-potable water from a water tank/cistern, such as water pressurisation and lawn sprinklers. Jet pumps will self prime up to 5 metres and are supplied with a carry handle, a manual on/off switch and power lead fitted with a 13 Amp fused plug. The range is suitable for general purpose use, pumping cold water.

Jet Unit Optimal for the elevated pressure delivery of clean non-potable water from a water tank/cistern, such as water pressurisation and lawn sprinklers. Jet pumps will self prime up to 5 metres and are supplied with a carry handle, a manual on/off switch and power lead fitted with a 13 Amp fused plug. The range is suitable for general purpose use, pumping cold water.

Jet Unit Optimal for the elevated pressure delivery of clean non-potable water from a water tank/cistern in either a positive or negative head application. Jet Boostamatic pumps provide fully automatic pressure/flow switch control, will self prime up to 5 metres and are supplied with a power lead fitted with a 13 Amp fused plug. The range is suitable for general purpose use, pumping cold water.

Jet Unit Optimal for the elevated pressure delivery of clean non-potable water from a water tank/cistern in either a positive or negative head application. Jet Boostamatic pumps provide fully automatic pressure/flow switch control, will self prime up to 5 metres and are supplied with a power lead fitted with a 13 Amp fused plug. The range is suitable for general purpose use, pumping cold water.

_x000D_ 288 litres per hour max flow _x000D_ Up to 5m head _x000D_ Easy access tank _x000D_ 3 inlet ports _x000D_ Twist and click non-return outlet Bar.b _x000D_ Built in spirit level _x000D_ Wall or floor mounted _x000D_ 2m power cable _x000D_ 6m discharge tube _x000D_ High level cut-out switch _x000D_ BS EN 60335 compliant _x000D_

Spare Part Stuart Electrastream circulation pump. Key Product Features Genuine Stuart Electrastream part supplied by Stuart Turner Compatible with original Stuart Electrastream products based on Ariston Aquabravo or Fabdec hot liquid cylinders