Stuart Turner

Peripheral Horizontal Unit Optimal for the pressurisation of liquid to outlets in a positive head application, where an instant boosted supply is required from a simple to install package. The range is suitable for commercial and domestic use, pumping hot or cold water.

Peripheral Horizontal Unit Intended for ongoing use, the Stainless Steel peripheral range is ideal for handling non abrasive liquids and is developed specifically for beer, lager or cider dispensing. Also used for pumping demineralised water. Key Product Features Peripheral pump Flow rates up to 38 litres per minute and heads up to 40 metres Top suction, vertical delivery connections Extended life seal Standard control Stainless Steel pump head and impeller Continuously rated 2 year warranty

Peripheral Horizontal Unit Intended for ongoing use, the Stainless Steel peripheral range is ideal for handling non abrasive liquids and is developed specifically for beer, lager or cider dispensing. Also used for pumping demineralised water. Key Product Features Peripheral pump Flow rates up to 38 litres per minute and heads up to 40 metres Top suction, vertical delivery connections Extended life seal Standard control Stainless Steel pump head and impeller Continuously rated 2 year warranty

Mains Boost Unit Product Discontinued - replaced by the new STORMBOOST Appropriate for reduced occupancy properties with typically one bathroom. The FLOMATE MBF-12 Pump is designed to be connected directly to the incoming mains and will deliver an additional 1.5 Bar. pressure to the existing mains pressure and a maximum flow rate of 12 litres per minute. The pump will start automatically when a flow rate of 0.6 litres per minute or more exists.

The STORMBOOST 60 is the new upgraded and enhanced direct replacement for the original Flomate MBF60._x000D_ _x000D_ STORMBOOST 60 is designed to be connected directly to the incoming cold water mains and activate automatically when a tap is opened or a shower is switched on, boosting mains water pressure and flow throughout the property._x000D_ _x000D_ It will deliver up to 16 litres/min flow at up to 3.2 Bar.

Mains Boost Setup Product Discontinued - replaced by the new STORMBOOST 80 FLOMATE MBF-80 can be connected directly to the incoming mains and will deliver up to 16 litres/minute throughput at 3.2 Bar. pressurisation to multiple outlets within the property, up to the preset cut-in limit of the 60 litre pressure vessel, at which time the system will deliver 12 litres/minute until demand ends and the pressure vessel recharges.

Mains Boost Setup Product Discontinued - replaced by the new STORMBOOST 100 FLOMATE MBF-100 is appropriate for household properties with one bathroom. Designed to sit within a typical kitchen 600 mm larder style cupboard it will deliver up to 18 litres/minute flow at 3.2 Bar.

Designed to sit within a typical kitchen 600 mm wide larder style cupboard or other home applications. It will deliver up to 22 litres/min flow at up to 3.2 Bar. pressure for up to 11 minutes after which time it will deliver up to 12 litres/minute continuously until demand ends and the pressure vessel recharges*. _x000D_ _x000D_ * The actual flow rate may less less than this and is dependent on the mains supply flow available.

Mains Boost Setup Product Discontinued - replaced by the new STORMBOOST 300 FLOMATE MBF-300 is appropriate for household applications with one or two bathrooms. Designed to sit within a typical kitchen 600 mm larder style cupboard it will deliver up to 24 litres/minute flow at 3.2 Bar.

Designed to provide a pressurised water supply from a break tank in either a positive or negative head application. CH multi-stage Boostamatic pumps are self priming up to 5 metres and do not rely on a gravity flow of water to activate. _x000D_ With flow rates up to 160 litres/minute and heads up to 62 metres, these pumps are suitable for commercial or domestic use, pumping hot or cold water and are supplied with G 1 flexible hoses and adaptors.

Designed to provide a pressurised water supply from a break tank in either a positive or negative head application. CH multi-stage Boostamatic pumps are self priming up to 5 metres and do not rely on a gravity flow of water to activate. _x000D_ With flow rates up to 160 litres/minute and heads up to 62 metres, these pumps are suitable for commercial or domestic use, pumping hot or cold water and are supplied with G 1 flexible hoses and adaptors.

Centrifugal Horizontal Unit multi-stage Intended to provide a pressurised liquid supply from a break tank in either a positive or negative head application. STUART CH4-50 B multi-stage Boostamatic pumps are self priming up to 5 metres and do not rely on a gravity flow of water to activate.

Centrifugal Horizontal Unit multi-stage Intended to provide a pressurised liquid supply from a break tank in either a positive or negative head application. STUART CH4-60 B multi-stage Boostamatic pumps are self priming up to 5 metres and do not rely on a gravity flow of water to activate.

Centrifugal Horizontal Unit multi-stage The STUART CH4-30 centrifugal multi-stage pump is optimal for pressure boosting in applications where long pipe runs or high heads may be involved. CH 4-30 pumps are self priming up to 5 metres and offer a high quality, reliable solution with flow rates up to 140 litres per minute and heads up to 25 metres.

Centrifugal Horizontal Unit multi-stage The STUART CH4-40 centrifugal multi-stage pump is optimal for pressure boosting in applications where long pipe runs or high heads may be involved. CH 4-40 pumps are self priming up to 5 metres and offer a high quality, reliable solution with flow rates up to 160 litres per minute and heads up to 36 metres.

Centrifugal Horizontal Unit multi-stage The STUART CH4-50 centrifugal multi-stage pump is optimal for pressure boosting in applications where long pipe runs or high heads may be involved. CH 4-50 pumps are self priming up to 5 metres and offer a high quality, reliable solution with flow rates up to 160 litres per minute and heads up to 50 metres.