Stuart Turner

Jet Unit

Optimal for the elevated pressure delivery of clean non-potable water from a water tank/cistern, such as water pressurisation and lawn sprinklers. Jet pumps will self prime up to 5 metres and are supplied with a carry handle, a manual on/off switch and power lead fitted with a 13 Amp fused plug. The range is suitable for general purpose use, pumping cold water.

Jet Unit

Optimal for the elevated pressure delivery of clean non-potable water from a water tank/cistern in either a positive or negative head application. Jet Boostamatic pumps provide fully automatic pressure/flow switch control, will self prime up to 5 metres and are supplied with a power lead fitted with a 13 Amp fused plug.
The range is suitable for general purpose use, pumping cold water.

Spare Part

Stuart Electrastream circulation pump.

Buy the Stuart Turner 15/60 (130) Circulator from Pumpify and receive free standard delivery.

Household Circulator

The Stuart ST 25/80 circulator features the latest in elevated efficiency technology offering an EEI rating of just 0.20 and proportional pressurisation control.
For use in new systems or as a replacement pump, this Cast Iron circulator is suitable for domestic heating systems.

This product is an ideal replacement for:

• Grundfos: UPS2 25-80
• Wilo: Yonos Pico 25/1/8
• Dab: Evotron 80/180
• Grundfos: UPS 25/55

Order the Stuart Turner ST 15/60 B (130) Circulator from Pumpify and receive free standard delivery.

The Stuart ST 15/60 B circulator features the latest in high efficiency technology offering an EEI rating of just 0.18 and proportional pressure control.

Key Product Features:

This product is an alternative product for:

• Grundfos: UPS 15/50N
• Dab: VS 65/150B
• CPL: SE60B
• Wilo: SB30

Floating Switch

Floating switches are used to automatically management a pump when filling or emptying a liquid tank/cistern. 
They are simple to install and level control is easily achieved by setting the position of the adjustment weight along the float lead.
Available with 3 or 5 metre cable lengths.

Centrifugal Pressurisation Set

Intended to meet setup demands in larger domestic and light commercial applications. The STUART CH4 multi-stage pump is mounted on to a WRAS Approved 24 litre diaphragm tank providing a buffer of pressurised stored water. STUART CH4 Pressure sets are ideally suited to boosting stored cold water supplies to un-vented hot water cylinders/combination boilers. Supplied with G1 flexible hoses and adaptors.

Integrated Booster Setup (CAT5)

iBOOST CAT 5 liquid pressurisation and flow boosting systems feature a weir overflow making them suitable for use in commercial applications where the risk of back flow contamination from Category 5 fluids exists.

Mains Liquid Boosting Setup

The MAINSBOOST MB 450SV-1 is intended for 'direct on mains' systems (unvented hot water cylinders and combination boilers) where the incoming mains pressure is greater than 2.5 bar. but the flow is insufficient to meet demand.
MAINSBOOST vessel systems do not require an electrical supply and operate silently.

System cold water storage capacity can be expanded simply by adding one or more MAINSBOOST Add-on pumps as required. 
If the incoming mains water pressure is less than 2.5 bar., a MAINSBOOST Charger pump can be utilised in conjunction with the MAINSBOOST vessel system to boost pressure.

The MAINSBOOST MB 450SV-1 features a nominal vessel size of 450 litres and a pressurised cold water water storage capacity of approximately 248 litres.
Each pump is supplied with the unique compact MAINSBOOST Monobloc 22/28mm Upstream Kit (USK) as standard which significantly simplifies installation.

Constructed from an epoxy coated steel body and a highly durable virgin butyl diaphragm, all MAINSBOOST vessels are supplied with a 5 year warranty.

Mainsboost Insulation Jacket

Mainsboost Insulation Jackets are tailor made to ensure a perfect fit and protect Mainsboost vessels from extremes of hot and cold temperatures, ensuring the potable liquid stored within the Mainsboost vessel is at the perfect temperature.

The Mainsboost MB 450SV features a nominal vessel size of 450 litres and a pressurised water holding capacity of approximately 248 litres. 

Constructed from an epoxy coated steel body and a highly durable virgin butyl diaphragm, all Mainsboost vessels are WRAS Approved and come with a 5 year guarantee.

Mains Boost Unit

Where vertical space is not an issue the Mainsboost vessel mounted Charger pump may be the answer. Mainsboost vessel mounted Charger pumps offers the same performance benefits as the wall mounted variant and can be utilised in conjunction with Mainsboost Steel vessels.

Liquid Conditioner - Catalytic

WRAS approved and intended to ensure limescale prevention in household properties, including water outlets and household appliances. The Stuart range of Water Conditioners offer a solution to match the typical water flow from the cold water mains to the property and are simply installed in-line with the existing pipework and are completely maintenance free.
The C3-22 is designed to condition water from the incoming mains water supply for use throughout the property.