Stuart Turner

Centrifugal Horizontal Unit multi-stage

Intended to provide a pressurised liquid supply from a break tank in either a positive or negative head application. STUART CH4-60 B multi-stage Boostamatic pumps are self priming up to 5 metres and do not rely on a gravity flow of water to activate. With flow rates up to 157 litres/minute and heads up to 64 metres, these pumps are suitable for commercial or domestic use, pumping hot or cold water and are supplied with G1 flexible hoses and adaptors.

Centrifugal Horizontal Unit multi-stage

The STUART CH4-30 centrifugal multi-stage pump is optimal for pressure boosting in applications where long pipe runs or high heads may be involved. CH 4-30 pumps are self priming up to 5 metres and offer a high quality, reliable solution with flow rates up to 140 litres per minute and heads up to 25 metres.

Centrifugal Horizontal Unit multi-stage

The STUART CH4-40 centrifugal multi-stage pump is optimal for pressure boosting in applications where long pipe runs or high heads may be involved. CH 4-40 pumps are self priming up to 5 metres and offer a high quality, reliable solution with flow rates up to 160 litres per minute and heads up to 36 metres.

Centrifugal Horizontal Unit multi-stage

The STUART CH4-50 centrifugal multi-stage pump is optimal for pressure boosting in applications where long pipe runs or high heads may be involved. CH 4-50 pumps are self priming up to 5 metres and offer a high quality, reliable solution with flow rates up to 160 litres per minute and heads up to 50 metres.

Centrifugal Horizontal Unit multi-stage

The CH 4-60 centrifugal multi-stage pump is optimal for pressure boosting in applications where long pipe runs or high heads may be involved. CH 4-60 pumps are self priming up to 5 metres and offer a high quality, reliable solution with flow rates up to 160 litres per minute and heads up to 62 metres.

Replacement reed switch suitable for all Monsoon Standard and Monsoon Universal pumps manufactured after 2008.

Contents:

• Reed Switch x1
• Strain Relief Bush x1
• Tie Wrap x1
• Screw Self Tapping 3.5mmx12mm x4
• Screw Self Tapping K40x16mm x4

Stuart Turner (est. 1906) is a UK manufacturer of water boosting and pressurisation systems. Their ranges include shower pumps, whole-house boosting sets and mains-pressure solutions. Typical applications are improving water pressure and flow in homes and light commercial buildings.

Spare Part

Replacement pressurisation vessel, appropriate for all Monsoon Universal pumps manufactured after 2008.

Contents:

• Pressure Vessel 0.6 Litre (x1)
• Rubber Washer 1/2" BSP (x1)
• O-Ring (x1)

Unit Management Module

The Management Module remotely switches pumps without controls and can be utilised in both positive and negative head plumbing systems.
The pump incorporates a pressure switch to start a connected pump and a flow switch to stop the pump, ensuring a continuous supply of boosted water to all outlets without hunting. Incorporating pump run dry protection, the control module features a simple LED display for power on, pump running and fault indication.
The pump is supplied with a 70 mm long extension piece allowing the module to clear the pump terminal box.

Stuart Turner - Anti-Vibration Pump Mounting Pad

This is a Spares/Kit item, please get in touch for product compatibility.

Stuart Turner (est. 1906) is a UK manufacturer of water boosting and pressurisation systems. Their ranges include shower pumps, whole-house boosting sets and mains-pressure solutions. Typical applications are improving water pressure and flow in homes and light commercial buildings.

Manufacturers code: 17682. Branded Stuart Turner Service Kit.

Integrated Booster Setup

Inadequate throughput rates and liquid pressure are common shortcomings for many properties, often resulting in underperforming showers and water using appliances. iBOOST offers a solution.
These fully integrated systems combine a 200 litre cold water storage tank and a high performance, multi-stage pump to overcome restricted water flow and insufficient pressure.

The iBOOST F200 features simple to operate fixed speed controls and is capable of generating pressures of up to 4.5 bar. and flow rates of up to 100 litres per minute, typically operating at 60 litres per minute at 3.0 bar. pressure.

Support Kit

This comprehensive Support Kit is appropriate for all Monsoon Universal pumps manufactured after 2008.

If your pump is older than this please contact TechAssist on +44 (0) 800 31 969 80.

Contents:

• Printed Circuit Board (x1)
• Motor Capacitor 5uF (x1)
• Motor Capacitor 7uF (x1)
• Motor Capacitor 10uF (x1)
• Motor Capacitor 12uF (x1)
• Inlet Strainer (x2)
• Rotary Seal Assembly (x2)
• Seal Counterface (x2)
• Seal Applicator Tool (x1)
• Pressure Vessel (x1)
• Pressure Switch 1 bar. (x1)
• Pressure Switch 1.5 bar. (x1)
• Magnetic Float Assembly (x2)
• Reed Switch (x2)
• Reed Switch Tie Wrap (x2)
• O-Ring ID 66.4 mm x 1.78 mm section (x2)
• Woodruff Key (x2)
• Circlip (x2)
• Stainless Steel Washer (x2)
• Screw Pozi Drive M6 x 35 (x8)
• Screw M4 x 16 (x8)
• Screw 3.5 x 12 mm (x4)

Jet Unit

Optimal for the elevated pressure delivery of clean non-potable water from a water tank/cistern, such as water pressurisation and lawn sprinklers. Jet pumps will self prime up to 5 metres and are supplied with a carry handle, a manual on/off switch and power lead fitted with a 13 Amp fused plug. The range is suitable for general purpose use, pumping cold water.