Zilmet Ultra-Pro Vertical Expansion Vessel - 10 Bar. - 750Ltr Zilmet ULTRA‑PRO pressure vessels are designed for high‑performance potable water and booster systems where reliability and.

Zilmet Ultra-Pro Vertical Expansion Vessel - 16 Bar. - 750Ltr Zilmet ULTRA‑PRO pressure vessels are designed for high‑performance potable water and booster systems where reliability and.

Zilmet Cal-Pro Vertical Expansion Vessel - 4 Bar. - 18Ltr Zilmet CAL‑PRO expansion vessels are designed for sealed heating systems to absorb thermal expansion as water temperature increases.

Built for sealed heating (EN 12828) and chilled-water systems, Flexcon Premium Expansion Vessels stabilise system pressure by absorbing thermal expansion so plant runs safely and efficiently.

A new TPO (thermoplastic polyolefin) diaphragm on 1235 Ltrs models delivers high flexibility and extremely low permeability, helping the pre-charge hold for longer. Lighter construction cuts material use and transport emissions; packaging is FSC-certified to reduce CO₂ impact.

• Sustainable design lighter TPO membrane uses up to 50% less material
• Long service life 15-year warranty
• Low permeability pre-charge pressure maintained for longer
• Heating & cooling suitable for LPHW and CHW installations

Vessels comply with EN 13831 and the Pressure Equipment Directive 2014/68/EU. Red epoxy powder coating (RAL 3002). Flexcon Premium 3580 are supplied with feet and a mounting kit.

Built for sealed potable hot and chilled water systems in domestic and commercial settings, these Potable Water Expansion Vessels stabilise pressure by absorbing thermal expansion for safe, reliable operation.

A nitrogen pre-charge helps retain set pressure longer, while a single threaded steel connection with plastic insert provides a durable, non-flow-through design. Suitable for central heating, cooling and tap water applications (not for solar collector circuits).

• Nitrogen gas filling for longer pre-charge retention
• Single threaded steel connection with plastic insert (no flow-through)
• Potable use supports domestic hot/chilled water
• Heating & cooling compatible for sealed systems

Designed for long service life with broad operating limits and glycol tolerance for demanding installations.

Built for sealed potable hot and chilled water systems in domestic and commercial settings, these Potable Water Expansion Vessels stabilise pressure by absorbing thermal expansion for safe, reliable operation.

A nitrogen pre-charge helps retain set pressure longer, while a single threaded steel connection with plastic insert provides a durable, non-flow-through design. Suitable for central heating, cooling and tap water applications (not for solar collector circuits).

• Nitrogen gas filling for longer pre-charge retention
• Single threaded steel connection with plastic insert (no flow-through)
• Potable use supports domestic hot/chilled water
• Heating & cooling compatible for sealed systems

Designed for long service life with broad operating limits and glycol tolerance for demanding installations.

The HeatWave Vessel - Inline - 18Ltr is a Pressure Vessel item.

The HeatWave™ series hydronic expansion tanks provide quality protection for closed loop hydronic heating systems from excessive pressure due to thermal expansion.

Easy to install and featuring an incorporated hex nut connection, HeatWave™ tanks feature an air chamber sealed with a brass air valve and O-ring sealed air cap.  developed to be supported by either system piping, wall-mounted bracket (inline models) or be freestanding (vertical model with base), the HeatWave™ has a maximum working temperature of 99° C / 210° F .

The operating pressure of this is 6 bar.

• Diaphragm design
• Patented Stainless Steel (vertical models) or chromed steel (inline models) water connection

• Two-part polyurethane, epoxy primed paint finish
• Leak-free, O-ring sealed air valve cap
• Maintenance Free

Includes & Benefits

The PressureWave Vessel - Inline - 18Ltr is a Pressure Vessel item.

• Booster systems
• Well systems
• epoxy primed paint finish
• Leak-free, O-ring sealed air valve cap

Includes & Benefits

The PressureWave Vessel - Horizontal - 20Ltr is a Pressure Vessel item.

The operating pressure of this is 10 bar.

• Booster systems
• Well systems
• epoxy primed paint finish
• Leak-free, O-ring sealed air valve cap

Purpose-built for solar thermal circuits, the Flexcon Solar 8/2.5 [8Bar] expansion vessel supports sealed systems in line with EN 12828, keeping pressure stable in high-temperature applications.

A preformed butyl rolling diaphragm with extremely low permeability helps retain pre-charge, while a nitrogen fill limits corrosion and pressure loss. The clench ring clamps the diaphragm evenly to prevent damage, and a ribbed profile avoids sticking for instant inflow. An uncoated connection thread aids watertight installation; the steel vessel is finished in a gleaming epoxy-powder coat and factory tested.

• Solar-ready expansion vessel for sealed systems
• Butyl rolling diaphragm with very low permeability
• Nitrogen pre-charge for longer pressure stability
• Clench ring construction for a robust, uniform seal

For 880 Ltrs models: both halves are coated before assembly to protect the clamp ring, and the nitrogen valve is countersunk and covered. Continuous medium temperature range −10 to 110 C.

Mains Liquid Boosting Setup

The MAINSBOOST MB 750SV-1 is intended for 'direct on mains' systems (unvented hot water cylinders and combination boilers) where the incoming mains pressure is greater than 2.5 bar. but the flow is insufficient to meet demand.
MAINSBOOST vessel systems do not require an electrical supply and operate silently.

System cold water storage capacity can be expanded simply by adding one or more MAINSBOOST Add-on pumps as required. 
If the incoming mains water pressure is less than 2.5 bar., a MAINSBOOST Charger pump can be utilised in conjunction with the MAINSBOOST vessel system to boost pressure.

The MAINSBOOST MB 750SV-1 features a nominal vessel size of 750 litres and a pressurised cold water water storage capacity of approximately 412 litres.
Each pump is supplied with a 35mm Upstream Kit (USK) as standard.

Constructed from an epoxy coated steel body and a highly durable virgin butyl diaphragm, all MAINSBOOST vessels are supplied with a 5 year warranty.

The MikroPro Expansion Vessels range serves almost any LPHW or CHW system, with capacities from 8500 Ltrs. Models up to 25 Ltrs are wall-mounted, while 35 Ltrs and above are floor-standing. This comes with a wall mount bracket.

With an 18Ltr capacity with an operating pressure of 3 Bar., this is built for performance, reliability and compliance, MikroPro vessels are PED 97/23/EC compliant, rated to a maximum operating temperature of 70 C, and available with pressure ratings of 3 Bar (835 Ltrs) or 6 Bar (501000 Ltrs). Threaded connections and a durable powder-coated finish simplify installation and maintenance.

• Capacities: 8500 Ltrs
• Mounting: wall (≤25 Ltrs) or floor (≥35 Ltrs)
• Ratings: up to 70 C, 36 Bar (model dependent)
• Applications: heating and chilled water systems

A versatile, robust choice for commercial and large domestic systems requiring stable expansion capacity and long service life.

The Flamco Flofix is a Potable water expansion vessel, for use in domestic and commercial sealed chilled and hot water systems.

Nitrogen gas filling for longer retention of pre-pressure. This product is manufactured by Flamco. The thread of the system connection is uncoated, ensuring problem free connection.

Technical Specifications

The Flamco Flofix Expansion Vessel - 18Ltr - 10 bar. is a Expansion Vessel item.

The operating pressure of this is 10 bar.

The Refix DE 18 diaphragm expansion vessel is designed for water supply installations that are not subject to DIN 1988 requirements, making it suitable for specialist systems such as fire extinguishing installations, service water systems

Vessels to protect Flexcon expansion vessels on elevated temperature systems. The vessels are fitted in between the expansion vessel and the system return. System water flows from the installation into the top of the vessel. From the bottom of the vessel, significantly cooler water is fed into. Capacity 750 Ltr.