Zilmet Ultra-Pro Vertical Expansion Vessel - 10 Bar. - 50Ltr Zilmet ULTRA‑PRO pressure vessels are designed for high‑performance potable water and booster systems where reliability and.

Zilmet Ultra-Pro Horizontal Expansion Vessel - 10 Bar. - 50Ltr Zilmet ULTRA‑PRO pressure vessels are designed for high‑performance potable water and booster systems where reliability and.

Zilmet Ultra-Pro Vertical Expansion Vessel - 10 Bar. - 750Ltr Zilmet ULTRA‑PRO pressure vessels are designed for high‑performance potable water and booster systems where reliability and.

Zilmet Ultra-Pro Vertical Expansion Vessel - 16 Bar. - 750Ltr Zilmet ULTRA‑PRO pressure vessels are designed for high‑performance potable water and booster systems where reliability and.

Zilmet Hydro-Pro Vertical Expansion Vessel - 10 Bar. - 50Ltr Zilmet HYDRO‑PRO pressure vessels are designed for potable water and booster systems where stable pressure and efficient pump.

Zilmet Hydro-Pro Horizontal Expansion Vessel - 10 Bar.- 50Ltr Zilmet HYDRO‑PRO pressure vessels are designed for potable water and booster systems where stable pressure and efficient pump.

Zilmet Cal-Pro Vertical Expansion Vessel - 4 Bar. - 50Ltr Zilmet CAL‑PRO expansion vessels are designed for sealed heating systems to absorb thermal expansion as water temperature increases.

Built for sealed heating (EN 12828) and chilled-water systems, Flexcon Premium Expansion Vessels stabilise system pressure by absorbing thermal expansion so plant runs safely and efficiently.

A new TPO (thermoplastic polyolefin) diaphragm on 1235 Ltrs models delivers high flexibility and extremely low permeability, helping the pre-charge hold for longer. Lighter construction cuts material use and transport emissions; packaging is FSC-certified to reduce CO₂ impact.

• Sustainable design lighter TPO membrane uses up to 50% less material
• Long service life 15-year warranty
• Low permeability pre-charge pressure maintained for longer
• Heating & cooling suitable for LPHW and CHW installations

Vessels comply with EN 13831 and the Pressure Equipment Directive 2014/68/EU. Red epoxy powder coating (RAL 3002). Flexcon Premium 3580 are supplied with feet and a mounting kit.

Built for sealed potable hot and chilled water systems in domestic and commercial settings, these Potable Water Expansion Vessels stabilise pressure by absorbing thermal expansion for safe, reliable operation.

A nitrogen pre-charge helps retain set pressure longer, while a single threaded steel connection with plastic insert provides a durable, non-flow-through design. Suitable for central heating, cooling and tap water applications (not for solar collector circuits).

• Nitrogen gas filling for longer pre-charge retention
• Single threaded steel connection with plastic insert (no flow-through)
• Potable use supports domestic hot/chilled water
• Heating & cooling compatible for sealed systems

Designed for long service life with broad operating limits and glycol tolerance for demanding installations.

Built for sealed potable hot and chilled water systems in domestic and commercial settings, these Potable Water Expansion Vessels stabilise pressure by absorbing thermal expansion for safe, reliable operation.

A nitrogen pre-charge helps retain set pressure longer, while a single threaded steel connection with plastic insert provides a durable, non-flow-through design. Suitable for central heating, cooling and tap water applications (not for solar collector circuits).

• Nitrogen gas filling for longer pre-charge retention
• Single threaded steel connection with plastic insert (no flow-through)
• Potable use supports domestic hot/chilled water
• Heating & cooling compatible for sealed systems

Designed for long service life with broad operating limits and glycol tolerance for demanding installations.

Includes & Benefits

The PressureWave Vessel - Horizontal - 20Ltr is a Pressure Vessel item.

The operating pressure of this is 10 bar.

• Booster systems
• Well systems
• epoxy primed paint finish
• Leak-free, O-ring sealed air valve cap

Purpose-built for solar thermal circuits, the Flexcon Solar 8/2.5 [8Bar] expansion vessel supports sealed systems in line with EN 12828, keeping pressure stable in high-temperature applications.

A preformed butyl rolling diaphragm with extremely low permeability helps retain pre-charge, while a nitrogen fill limits corrosion and pressure loss. The clench ring clamps the diaphragm evenly to prevent damage, and a ribbed profile avoids sticking for instant inflow. An uncoated connection thread aids watertight installation; the steel vessel is finished in a gleaming epoxy-powder coat and factory tested.

• Solar-ready expansion vessel for sealed systems
• Butyl rolling diaphragm with very low permeability
• Nitrogen pre-charge for longer pressure stability
• Clench ring construction for a robust, uniform seal

For 880 Ltrs models: both halves are coated before assembly to protect the clamp ring, and the nitrogen valve is countersunk and covered. Continuous medium temperature range −10 to 110 C.

Mains Liquid Boosting Setup

The MAINSBOOST MB 750SV-1 is intended for 'direct on mains' systems (unvented hot water cylinders and combination boilers) where the incoming mains pressure is greater than 2.5 bar. but the flow is insufficient to meet demand.
MAINSBOOST vessel systems do not require an electrical supply and operate silently.

System cold water storage capacity can be expanded simply by adding one or more MAINSBOOST Add-on pumps as required. 
If the incoming mains water pressure is less than 2.5 bar., a MAINSBOOST Charger pump can be utilised in conjunction with the MAINSBOOST vessel system to boost pressure.

The MAINSBOOST MB 750SV-1 features a nominal vessel size of 750 litres and a pressurised cold water water storage capacity of approximately 412 litres.
Each pump is supplied with a 35mm Upstream Kit (USK) as standard.

Constructed from an epoxy coated steel body and a highly durable virgin butyl diaphragm, all MAINSBOOST vessels are supplied with a 5 year warranty.

MikroPro Potable XP Expansion Vessel - 50 Litre Capacity - 10 bar. This range serves heating, chilled and potable (drinking) water systems, with capacities up to 500 Ltrs to suit a wide variety of installations for commercial or residential. This item comes without a wall mount bracket.

Built for hygiene and durability, all internal surfaces in contact with water are corrosion-protected for potable use, and models from 50–500 Ltrs feature a replaceable diaphragm for straightforward maintenance.

• Capacity options: 12–500 Ltrs
• Rated pressure: up to 10 Bar
• Potable-safe construction: coated internal wetted surfaces
• Serviceable design: replaceable diaphragm (50–500 Ltrs)

Vessels are PED 97/23/EC compliant, rated to 70 °C, and supplied with threaded connections and a durable powder-coated finish for long service life.

Maintain potable water hygiene and stable pressure with the Flamco Airfix A flow-through expansion vessel for mains-fed potable and fresh-water systems.

For use in potable water, or fresh-water installations.

The Airfix A expansion vessels operate in such a way that the water flows right through and they are continuously flushed with fresh water from the mains.

This prevents tepid, stagnant water from collecting in the vessel in which bacterial growth could occur.

Therefore, users can be assured of high quality potable water.

Applying an Airfix A expansion vessel to a water heater prevents the opening of the safety group or safety valve each time the potable water is heated.

A synthetic flow-through device installed in a standard T-piece (not included) diverts part of the line flow through the vessel to prevent stagnation. This reduces nuisance safety-valve lift on water heaters and avoids waste, while keeping water continuously refreshed.

• Flow-through design helps suppress bacterial growth
• Protects safety devices by reducing valve lift and leakage risk
• Taste/odour neutral butyl diaphragm for potable use
• Corrosion-resistant internal coatings on water and nitrogen sides

Factory nitrogen pre-charge supports long-term pressure stability. Internationally approved and certified. Compatible with Airfixcontrol for quick annual pre-charge checks.

The Flamco Airfix P Expansion Vessel - 50 Litre - 2.7 bar. - Horizontal is a Expansion Vessel item.