Vessels to protect Flexcon expansion vessels on elevated temperature systems. The vessels are fitted in between the expansion vessel and the system return. System water flows from the installation into the top of the vessel. From the bottom of the vessel, significantly cooler water is fed into. Capacity 350 Ltr.

Vessels to protect Flexcon expansion vessels on elevated temperature systems. The vessels are fitted in between the expansion vessel and the system return. System water flows from the installation into the top of the vessel. From the bottom of the vessel, significantly cooler water is fed into. Capacity 500 Ltr.

Vessels to protect Flexcon expansion vessels on elevated temperature systems. The vessels are fitted in between the expansion vessel and the system return. System water flows from the installation into the top of the vessel. From the bottom of the vessel, significantly cooler water is fed into. Capacity 750 Ltr.

For easy mounting of Cubex R vessels of 12 - 18 litres to a wall.

Flamco (est. 1956) is a Dutch manufacturer of HVAC and plumbing system components, including expansion vessels, air separators and pressurisation accessories. Their ranges are used in heating and chilled-water circuits and potable water systems across domestic and commercial installations.

Store and deliver mains-pressure hot water with Flextherm Supastor Indirect Unvented Cylinders—compact, high-performance stainless-steel vessels for closed potable systems.

Designed to UK specs with neat in-line connections, each cylinder is supplied complete with controls, including a 2-port motorised valve, for quick, compliant installation in domestic or commercial plant rooms.

• Application: domestic and commercial potable hot/cold water storage
• Design: indirect, unvented cylinders for closed-circuit water supply
• Connections: compact layout with in-line tappings for easy install
• Controls included: full kit with 2-port motorised valve
• Material: Stainless Steel DUPLEX LDX 2101 (EN 1.4162)
• Performance limits: max working pressure 6.0 Bar; max working temperature 90 °C
• Efficiency: economical running with rapid heat-up and recovery

Purpose-built for heat pump systems and sealed heating circuits, the Flextherm PS Thermal Storage Buffer stores heated water to stabilise flow, smooth demand and cut compressor cycling.

Floor-standing steel construction with 90° opposed connections allows corner placement for a smaller footprint. Models up to 2000 Ltrs include height-adjustable feet for accurate levelling. Four G½" temperature sensor ports support precise control. Maximum operating temperature 95 °C.

• Heat-pump friendly: reduces start/stop frequency
• Compact install: 90° connections suit corner mounting
• Scalable: link multiple buffers for higher volume
• Serviceable: adjustable feet (≤ 2000 Ltrs) for easy levelling

Note: this PS variant is typically used for heating; for chilled applications with factory insulation specify Flextherm PSK.