Wilo

Please ensure Top-S replacement head part is appropriate for your pump model. Replacement heads unfortunately CANNOT be returned if they have been attempted to be fitted. If unsure please contact 0800 008 6405.

Can be utilised for Hot-water heating systems of all sorts, industrial circulation systems, air-conditioning systems and closed cooling circuits.

Maintenance-free glandless circulation pump with threaded or flange connection, pre-selectable speed stages for power adjustment.

Pump, Thermal insulation, Including seals for threaded connection, Washers for flange screws (for nominal connection diameters DN 40 - DN 65), and Installation manual and operating instructions.

Advantages:

High-efficiency pump Wilo-Yonos MAXO-D, electronically controlled. Glandless twin-head pump, synchronous motor according to ECM technology and integrated power control for continuous differential pressure control. can be utilised for all heating, ventilation and air-conditioning applications.

Each pump can be operated in individual operation (main/standby operation). The connection module Yonos MAXO can be utilised for automatic fault-actuated switchover.

Standard-equipped with:

This circulator is suitable only for drinking water.

can be utilised for domestic Hot water circulation systems in the industry and building services.

Glandless circulator with screwed or flange connection, preselectable speed stages for power adjustment.

Equipment and function

Ready-for-connection, fully submersible and automatic sewage lifting unit as a double pump system with automatic duty cycling, standby and peak-load operation. Dry motor in single-phase version with Stainless Steel housing and thermal motor monitoring.

Gas-tight and water-tight collection reservoir made from plastic with tapering collection chamber for dependable operation without any build-up of deposits, freely selectable inlets and a level control device with a rod float switch.

Central pressure connection with integrated Y-pipe, non-return valve, and lifting device.

Microprocessor-controlled switchgear with:

- LEDs for displaying operating status and error messages
- Adjustable run-on time
- Integrated and mains-independent alarm
- 1x potential-free contact for connection of a collective fault signal (SSM)

Scope of delivery:

- Sewage lifting unit ready for connection with switchgear and plug
- 1x inlet seal DN 100
- 1x hole saw for inlet DN 100
- 1x lip seal for connection of diaphragm hand pump or inlet connection Ø 50 mm
- 1x collar for ventilation connection DN 70
- 1x flange connector DN 80/100 with flat gasket, flexible hose section and fixing material for pressure connection DN 100
- 9 V rechargeable battery
- 11x sound absorption strips for sound insulation Installation manual
- Fixation material

Operating Data:

Fluid to be pumped : Water 100 %
Fluid temperature : 20 °C
Delivery head at Q=0 : 8,50 m

Permitted field of application:

Max. ambient temperature : 40 °C
Min. fluid temperature : 3 °C
Max. fluid temperature : 40 °C
Max. fluid temperature, for short periods up to 3 min : 60 °C
Maximum operating pressure : 1,5 bar.
Max. permissible pressure in the pressure pipe : 150 kPa Unit
Gross volume : 115 l
Max. switching volume : 40 l
Inlet connection : DN 40/DN 100/DN 150
Pressure connection : DN 80
Venting : DN 70
Operating mode per pump : S3-15%, 80 sec
Min. level ON : 180 mm
Dimensions : 810 x 505 x 780 mm
Diagonal dimension : 970 mm
Weight approx. : 91 kg

Motor

Mains connection : 1~230V/50 Hz
Power consumption P1 : 1,3 kW
Rated speed : 2900 1/min
Rated current : 5,8 A

Single-stage, low-pressure Centrifugal Pump in in line design with a mechanical seal, flange connection with pressure measuring connection R 1/8, lantern, coupling and IEC standard motor.

Order the Wilo - Cronoline range from Pumpify and recieve free standard delivery.

Permissible temperature range -20 °C to +140 °C, Mains connection 3~400 V, 50 Hz (others on request), Protection class IP 55, Nominal diameter DN 32 to DN 250, and Max. operating pressure 16 bar. (25 bar. on request).

Pump housing and lantern: Standard: EN-GJL-250; optionally spheroidal Cast Iron EN-GJS-400-18-LT, Impeller: Standard: EN-GJL-200; special version: Bronze CuSn 10, Shaft: 1.4122, and Mechanical seal: AQEGG; other mechanical seals on request.

• Reduced life cycle costs thanks to optimized efficiency
• Standard condensate drainage holes in the motor housings
• Can be utilised flexibly in air-conditioning and cooling systems, with application benefits due to direct draining of condensate via optimised lantern design (patented)
• High standard of corrosion protection thanks to cataphoretic coating
• High worldwide availability of standard motors (according to Wilo - specifications) and standard mechanical seals

Single-stage, low-pressure Centrifugal Pump in in line design with a mechanical seal, flange connection with pressure measuring connection R 1/8, lantern, coupling and IEC standard motor.

Order the Wilo - Cronoline range from Pumpify and recieve free standard delivery.

Permissible temperature range -20 °C to +140 °C, Mains connection 3~400 V, 50 Hz (others on request), Protection class IP 55, Nominal diameter DN 32 to DN 250, and Max. operating pressure 16 bar. (25 bar. on request).

Pump housing and lantern: Standard: EN-GJL-250; optionally spheroidal Cast Iron EN-GJS-400-18-LT, Impeller: Standard: EN-GJL-200; special version: Bronze CuSn 10, Shaft: 1.4122, and Mechanical seal: AQEGG; other mechanical seals on request.

• Reduced life cycle costs thanks to optimized efficiency
• Standard condensate drainage holes in the motor housings
• Can be utilised flexibly in air-conditioning and cooling systems, with application benefits due to direct draining of condensate via optimised lantern design (patented)
• High standard of corrosion protection thanks to cataphoretic coating
• High worldwide availability of standard motors (according to Wilo - specifications) and standard mechanical seals

Single-stage, low-pressure Centrifugal Pump in in line design with a mechanical seal, flange connection with pressure measuring connection R 1/8, lantern, coupling and IEC standard motor.

Order the Wilo - Cronoline range from Pumpify and recieve free standard delivery.

Permissible temperature range -20 °C to +140 °C, Mains connection 3~400 V, 50 Hz (others on request), Protection class IP 55, Nominal diameter DN 32 to DN 250, and Max. operating pressure 16 bar. (25 bar. on request).

Pump housing and lantern: Standard: EN-GJL-250; optionally spheroidal Cast Iron EN-GJS-400-18-LT, Impeller: Standard: EN-GJL-200; special version: Bronze CuSn 10, Shaft: 1.4122, and Mechanical seal: AQEGG; other mechanical seals on request.

• Reduced life cycle costs thanks to optimized efficiency
• Standard condensate drainage holes in the motor housings
• Can be utilised flexibly in air-conditioning and cooling systems, with application benefits due to direct draining of condensate via optimised lantern design (patented)
• High standard of corrosion protection thanks to cataphoretic coating
• High worldwide availability of standard motors (according to Wilo - specifications) and standard mechanical seals

Single-stage, low-pressure Centrifugal Pump in in line design with a mechanical seal, flange connection with pressure measuring connection R 1/8, lantern, coupling and IEC standard motor.

Order the Wilo - Cronoline range from Pumpify and recieve free standard delivery.

Permissible temperature range -20 °C to +140 °C, Mains connection 3~400 V, 50 Hz (others on request), Protection class IP 55, Nominal diameter DN 32 to DN 250, and Max. operating pressure 16 bar. (25 bar. on request).

Pump housing and lantern: Standard: EN-GJL-250; optionally spheroidal Cast Iron EN-GJS-400-18-LT, Impeller: Standard: EN-GJL-200; special version: Bronze CuSn 10, Shaft: 1.4122, and Mechanical seal: AQEGG; other mechanical seals on request.

• Reduced life cycle costs thanks to optimized efficiency
• Standard condensate drainage holes in the motor housings
• Can be utilised flexibly in air-conditioning and cooling systems, with application benefits due to direct draining of condensate via optimised lantern design (patented)
• High standard of corrosion protection thanks to cataphoretic coating
• High worldwide availability of standard motors (according to Wilo - specifications) and standard mechanical seals

Single-stage, low-pressure twin-head pump in in line design with switchover valve, mechanical seal, flange connection with pressure measuring connection R 1/8, lantern, coupling and IEC standard motor.

Order the Wilo - CronoTwin Centrifugal Pump range from Pumpify and recieve free standard delivery.

Permissible temperature range -20 °C to +140 °C, Mains connection 3~400 V, 50 Hz (others on request), Protection class IP 55, Nominal diameter DN 32 to DN 200, and Max. operating pressure 16 bar..

Pump housing and lantern: Standard: EN-GJL-250, Impeller: Standard: EN-GJL-200; special version: Bronze CuSn 10, Shaft: 1.4122, and Mechanical seal: AQEGG; other mechanical seals on request.

• Reduced life cycle costs through optimised efficiency
• Can be utilised flexibly in air-conditioning and cooling systems, with application benefits due to direct draining of condensate via optimised lantern design (patented)
• High standard of corrosion protection thanks to cataphoretic coating
• Main/standby mode or peak-load operation (by means of external auxiliary device)

Single-stage, low-pressure twin-head pump in in line design with switchover valve, mechanical seal, flange connection with pressure measuring connection R 1/8, lantern, coupling and IEC standard motor.

Order the Wilo - CronoTwin Centrifugal Pump range from Pumpify and recieve free standard delivery.

Permissible temperature range -20 °C to +140 °C, Mains connection 3~400 V, 50 Hz (others on request), Protection class IP 55, Nominal diameter DN 32 to DN 200, and Max. operating pressure 16 bar..

Pump housing and lantern: Standard: EN-GJL-250, Impeller: Standard: EN-GJL-200; special version: Bronze CuSn 10, Shaft: 1.4122, and Mechanical seal: AQEGG; other mechanical seals on request.

• Reduced life cycle costs through optimised efficiency
• Can be utilised flexibly in air-conditioning and cooling systems, with application benefits due to direct draining of condensate via optimised lantern design (patented)
• High standard of corrosion protection thanks to cataphoretic coating
• Main/standby mode or peak-load operation (by means of external auxiliary device)

Single-stage, low-pressure twin-head pump in in line design with switchover valve, mechanical seal, flange connection with pressure measuring connection R 1/8, lantern, coupling and IEC standard motor.

Order the Wilo - CronoTwin Centrifugal Pump range from Pumpify and recieve free standard delivery.

Permissible temperature range -20 °C to +140 °C, Mains connection 3~400 V, 50 Hz (others on request), Protection class IP 55, Nominal diameter DN 32 to DN 200, and Max. operating pressure 16 bar..

Pump housing and lantern: Standard: EN-GJL-250, Impeller: Standard: EN-GJL-200; special version: Bronze CuSn 10, Shaft: 1.4122, and Mechanical seal: AQEGG; other mechanical seals on request.

• Reduced life cycle costs through optimised efficiency
• Can be utilised flexibly in air-conditioning and cooling systems, with application benefits due to direct draining of condensate via optimised lantern design (patented)
• High standard of corrosion protection thanks to cataphoretic coating
• Main/standby mode or peak-load operation (by means of external auxiliary device)

Single-stage low-pressure Centrifugal Pump in monobloc design, with axial suction port and radially arranged pressure port with mechanical seal, flange connection with pressure measuring connection R 1/8, lantern, coupling and IEC standard motor.

Order the Wilo - Cronobloc range from Pumpify and recieve free standard delivery.

Permissible temperature range of -20 °C to +140 °C, Mains connection 3~400 V, 50 Hz (others on request), Protection class IP55, Nominal diameter DN 32 to DN 150, and Max. operating pressure 16 bar. (optionally 25 bar. on request).

Pump housing and lantern: Standard: EN-GJL-250; optional: Spheroidal Cast Iron EN-GJS-400-18-LT (depending on type), Impeller: Standard: EN-GJL-200; special version: Bronze CuSn 10 Stainless Steel 1.4408 (depending on type), Shaft: 1.4122, and Mechanical seal: AQEGG; other mechanical seals on request.

• Energy-efficient due to state-of-the-art pump hydraulics and the use of IE3 motors
• Cataphoretic coating of all Cast Iron components maintains high resistance to corrosion and long service life
• Universal use in diverse applications thanks to different impeller materials, several motor options as well as different mechanical seals
• Easy Installation manual due to standard pump support feet and optional supporting blocks
• Easy maintenance and user-friendly design with optional “back pull-out” design and cartridge mechanical seal for large pump types

Highly efficient high-pressure multistage centrifugal pump in vertical design with in-line connections.

The non self-priming high-pressure multistage centrifugal pump has a compact overall design and is particularly efficient and easy to maintain. The pump shaft and the motor shaft of the IEC standard motor are connected by means of a clamp coupling.

A separate lantern roller bearing ensures optimum admission of axial thrusts. Intermediate bearings in the hydraulics and corrosion-resistant shaft due to Stainless Steel sleeve ensure a long service life. Special, permanently attached lifting eyes enable easy pump installation.

The pump is suitable for water supply, water distribution and pressure boosting, industrial recirculation systems, process water and closed cooling circuits. It can also be used in fire extinguishing systems, washing systems as well as for irrigation.

Special features/product advantages

• Efficiency-optimised, laser-welded 2D/3D hydraulics, flow and degassing optimised
• Corrosion-resistant impellers, guide vanes and stage housings
• Flow and NPSH-optimised pump housing
• Maintenance-friendly design with particularly robust coupling guard
• Drinking water approval for pumps with parts that come in contact with the fluid made of Stainless Steel (EPDM version)

Scope of delivery

• Wilo-Helix V high-pressure multistage centrifugal pump
• Installation and operating instructions
• PN16 version with oval flanges: Stainless Steel counter flanges with the corresponding screws, nuts and gaskets

Design notes

• Motor protection for 3-phase motor is to be provided on request or onsite
• Single-phase AC motor equipped with built-in thermal motor protection and capacitor
• In its standard position, the terminal box is aligned with the suction flange, but this can be changed if necessary
• The Wilo-Helix V is equipped with a user-friendly mechanical seal in a cartridge design and standard gasket for easy maintenance
• The spacer coupling (from ≥ 7.5 kW) allows the mechanical seal to be replaced without removing the motor
• The flexible lantern design, which is available in two alignments, enables direct access to the mechanical seal
• For pump versions PN16, PN25 and Pmax = 30 Bar., round counter flanges in Cast Iron or Stainless Steel, screws, nuts and gaskets are available as accessories
• Bypass sets are available as accessories
• The Wilo-Helix V(F) VdS certified version upon request

High efficiency pump Wilo-Yonos MAXO

is an electronically controlled,

Glandless circulator, synchronous motor according to ECM technology and integrated power control for continuous differential pressure control. can be utilised for all heating, ventilation and air-conditioning applications.

Standard-equipped with:

High efficiency pump Wilo-Yonos MAXO

is an electronically controlled,

Glandless circulator, synchronous motor according to ECM technology and integrated power control for continuous differential pressure control. can be utilised for all heating, ventilation and air-conditioning applications.

Standard-equipped with:

High-efficiency pump Wilo-Yonos MAXO-D, electronically controlled. Glandless twin-head pump, synchronous motor according to ECM technology and integrated power control for continuous differential pressure control. can be utilised for all heating, ventilation and air-conditioning applications.

Each pump can be operated in individual operation (main/standby operation). The connection module Yonos MAXO can be utilised for automatic fault-actuated switchover.

Standard-equipped with: