Wilo

The Veroline IPL Centrifugal Pumps are a range of single-stage, low-pressure Centrifugal Pump in in line design with mechanical seal, flange connection with pressure measuring connection R 1/8 and motor with one-piece shaft.

Purchase from Pumpify and recieve free standard delivery.

High standard of corrosion protection thanks to cataphoretic coating, Standard condensate drainage holes in the motor housings and lanterns, Series Product detail: motor with one-piece shaft, Version N: Standard motor V1 with Stainless Steel plug shaft, and Bidirectional, force-flushed mechanical seal.

Permissible temperature range -20 °C to +120 °C, Mains connection 3~400 V, 50 Hz (others on request), Protection class IP 55, Nominal diameter Rp 1 to DN 100, and Max. operating pressure 10 bar. (special version: 16 bar.).

• Pump housing and lantern: EN-GJL-250
• Impeller: PPO fibreglass-reinforced EN-GJL-200 (depending on pump type)
• Shaft: 1.4021
• Mechanical seal: AQEGG; other mechanical seals on request

In-line twin-head pump with two single-stage glanded centrifugal pumps in the same housing with switchover valve in the pressure port. Pump with compact in-line design with directly flanged three-phase current motor and one-piece shafts or with lanterns and standard motors (version N) rigidly connected by couplings.

The DPL series is suitable for pipe installation or installation on a base. Mounting brackets are available as accessories. With force-flushed circulation, bidirectional bellows mechanical seals and cavitation-reducing plastic impeller.

Flanges with pressure measuring connections R 1/8. The pump housing and lantern are cataphoretic-coated.

The motor terminal box can be made of metal or plastic. If a metal terminal box is absolutely necessary, please order the appropriate special variant.

Single-stage, low-pressure twin-head pump in in line design with switchover valve, mechanical seal, flange connection with pressure measuring connection R 1/8 and motor with one-piece shaft.

Order the VeroTwin DPL range from Pumpify and recieve free standard delivery.

Permissible temperature range -20 °C to +120 °C, Mains connection 3~400 V, 50 Hz (others on request), Protection class IP 55, Nominal diameter DN 32 to DN 100, and Max. operating pressure 10 bar. (special version: 16 bar.).

Reduction of space required and Installation manual costs due to twin-head pump design, Main/standby mode or peak-load operation (by means of external auxiliary device), High standard of corrosion protection thanks to cataphoretic coating, Series Product detail: motor with one-piece shaft, and Version N: standard motor B5 or V1 with Stainless Steel plug shaft.

• Pump housing and lantern: EN-GJL-250
• Impeller: PP fibreglass-reinforced /EN-GJL-200 (depending on pump type)
• Shaft: 1.4021
• Mechanical seal: AQ1EGG; other mechanical seals on request

Single-stage, low-pressure Centrifugal Pump in in line design with a mechanical seal, flange connection with pressure measuring connection R 1/8, lantern, coupling and IEC standard motor.

Order the Wilo - Cronoline range from Pumpify and recieve free standard delivery.

Permissible temperature range -20 °C to +140 °C, Mains connection 3~400 V, 50 Hz (others on request), Protection class IP 55, Nominal diameter DN 32 to DN 250, and Max. operating pressure 16 bar. (25 bar. on request).

Pump housing and lantern: Standard: EN-GJL-250; optionally spheroidal Cast Iron EN-GJS-400-18-LT, Impeller: Standard: EN-GJL-200; special version: Bronze CuSn 10, Shaft: 1.4122, and Mechanical seal: AQEGG; other mechanical seals on request.

• Reduced life cycle costs thanks to optimized efficiency
• Standard condensate drainage holes in the motor housings
• Can be utilised flexibly in air-conditioning and cooling systems, with application benefits due to direct draining of condensate via optimised lantern design (patented)
• High standard of corrosion protection thanks to cataphoretic coating
• High worldwide availability of standard motors (according to Wilo - specifications) and standard mechanical seals

Single-stage, low-pressure Centrifugal Pump in in line design with a mechanical seal, flange connection with pressure measuring connection R 1/8, lantern, coupling and IEC standard motor.

Order the Wilo - Cronoline range from Pumpify and recieve free standard delivery.

Permissible temperature range -20 °C to +140 °C, Mains connection 3~400 V, 50 Hz (others on request), Protection class IP 55, Nominal diameter DN 32 to DN 250, and Max. operating pressure 16 bar. (25 bar. on request).

Pump housing and lantern: Standard: EN-GJL-250; optionally spheroidal Cast Iron EN-GJS-400-18-LT, Impeller: Standard: EN-GJL-200; special version: Bronze CuSn 10, Shaft: 1.4122, and Mechanical seal: AQEGG; other mechanical seals on request.

• Reduced life cycle costs thanks to optimized efficiency
• Standard condensate drainage holes in the motor housings
• Can be utilised flexibly in air-conditioning and cooling systems, with application benefits due to direct draining of condensate via optimised lantern design (patented)
• High standard of corrosion protection thanks to cataphoretic coating
• High worldwide availability of standard motors (according to Wilo - specifications) and standard mechanical seals

Single-stage, low-pressure Centrifugal Pump in in line design with a mechanical seal, flange connection with pressure measuring connection R 1/8, lantern, coupling and IEC standard motor.

Order the Wilo - Cronoline range from Pumpify and recieve free standard delivery.

Permissible temperature range -20 °C to +140 °C, Mains connection 3~400 V, 50 Hz (others on request), Protection class IP 55, Nominal diameter DN 32 to DN 250, and Max. operating pressure 16 bar. (25 bar. on request).

Pump housing and lantern: Standard: EN-GJL-250; optionally spheroidal Cast Iron EN-GJS-400-18-LT, Impeller: Standard: EN-GJL-200; special version: Bronze CuSn 10, Shaft: 1.4122, and Mechanical seal: AQEGG; other mechanical seals on request.

• Reduced life cycle costs thanks to optimized efficiency
• Standard condensate drainage holes in the motor housings
• Can be utilised flexibly in air-conditioning and cooling systems, with application benefits due to direct draining of condensate via optimised lantern design (patented)
• High standard of corrosion protection thanks to cataphoretic coating
• High worldwide availability of standard motors (according to Wilo - specifications) and standard mechanical seals

Single-stage, low-pressure twin-head pump in in line design with switchover valve, mechanical seal, flange connection with pressure measuring connection R 1/8, lantern, coupling and IEC standard motor.

Order the Wilo - CronoTwin Centrifugal Pump range from Pumpify and recieve free standard delivery.

Permissible temperature range -20 °C to +140 °C, Mains connection 3~400 V, 50 Hz (others on request), Protection class IP 55, Nominal diameter DN 32 to DN 200, and Max. operating pressure 16 bar..

Pump housing and lantern: Standard: EN-GJL-250, Impeller: Standard: EN-GJL-200; special version: Bronze CuSn 10, Shaft: 1.4122, and Mechanical seal: AQEGG; other mechanical seals on request.

• Reduced life cycle costs through optimised efficiency
• Can be utilised flexibly in air-conditioning and cooling systems, with application benefits due to direct draining of condensate via optimised lantern design (patented)
• High standard of corrosion protection thanks to cataphoretic coating
• Main/standby mode or peak-load operation (by means of external auxiliary device)

Single-stage, low-pressure twin-head pump in in line design with switchover valve, mechanical seal, flange connection with pressure measuring connection R 1/8, lantern, coupling and IEC standard motor.

Order the Wilo - CronoTwin Centrifugal Pump range from Pumpify and recieve free standard delivery.

Permissible temperature range -20 °C to +140 °C, Mains connection 3~400 V, 50 Hz (others on request), Protection class IP 55, Nominal diameter DN 32 to DN 200, and Max. operating pressure 16 bar..

Pump housing and lantern: Standard: EN-GJL-250, Impeller: Standard: EN-GJL-200; special version: Bronze CuSn 10, Shaft: 1.4122, and Mechanical seal: AQEGG; other mechanical seals on request.

• Reduced life cycle costs through optimised efficiency
• Can be utilised flexibly in air-conditioning and cooling systems, with application benefits due to direct draining of condensate via optimised lantern design (patented)
• High standard of corrosion protection thanks to cataphoretic coating
• Main/standby mode or peak-load operation (by means of external auxiliary device)

Single-stage, low-pressure twin-head pump in in line design with switchover valve, mechanical seal, flange connection with pressure measuring connection R 1/8, lantern, coupling and IEC standard motor.

Order the Wilo - CronoTwin Centrifugal Pump range from Pumpify and recieve free standard delivery.

Permissible temperature range -20 °C to +140 °C, Mains connection 3~400 V, 50 Hz (others on request), Protection class IP 55, Nominal diameter DN 32 to DN 200, and Max. operating pressure 16 bar..

Pump housing and lantern: Standard: EN-GJL-250, Impeller: Standard: EN-GJL-200; special version: Bronze CuSn 10, Shaft: 1.4122, and Mechanical seal: AQEGG; other mechanical seals on request.

• Reduced life cycle costs through optimised efficiency
• Can be utilised flexibly in air-conditioning and cooling systems, with application benefits due to direct draining of condensate via optimised lantern design (patented)
• High standard of corrosion protection thanks to cataphoretic coating
• Main/standby mode or peak-load operation (by means of external auxiliary device)