Wilo

2046664
Wilo - TOP-S 30/10 REPLACEMENT Head - 400V - 3 Phase
Please ensure Top-S replacement head part is appropriate for your pump model. Replacement heads unfortunately CANNOT be returned if they have been attempted to be fitted. If unsure please contact 0800 008 6405.

Can be utilised for Hot-water heating systems of all sorts, industrial circulation systems, air-conditioning systems and closed cooling circuits.

Maintenance-free glandless circulation pump with threaded or flange connection, pre-selectable speed stages for power adjustment.
Item includes:
Pump, Thermal insulation, Including seals for threaded connection, Washers for flange screws (for nominal connection diameters DN 40 - DN 65), and Installation manual and operating instructions.

Advantages:

Direction of rotation signal lamp for displaying the correct sense of rotation (only with 3~), Manual power adjustment with 3 speed stages, and Pump housing with cataphoretic coating (KTL) protects against corrosion due to condensation formation.

Tech Info

Permitted temperature range -20 C to +130 C, for short periods (2 h) to +140 C (TOP-S 25/13, 80/15, 80/20: -20 C to +110 C)

Mains connection:

1~230 V, 50 Hz (depending on type)

3~230 V, 50 Hz (with optional switching plug)

3~400 V, 50 Hz

Protection class IP X4D

Screwed connection or flange connection (depending on type) Rp 1 to DN 100

Max. operating pressure of standard version: 6/10 bar. or 6 bar. (special version: 10 bar.)

Materials

Pump housing: Grey Cast Iron

Impeller: Plastic

Shaft: Stainless Steel

Bearing: Carbon, metal impregnated

Construction:
Glandless circulation pump with screwed connection or flange connection.

Application
Hot-water heating systems of all sorts, industrial circulation systems, air-conditioning systems and closed cooling circuits

Equipment/function
Operating modes

Speed-stage switching

Manual functions

Setting the speed stages: 3 speed stages (2 speed stages for 1~ pumps with P2 350 W)

Automatic functions

Internal protection against non-approved high winding temperatures (only for pumps for which P2 180 W)

Signal and display functions

Thermal winding contact (WSK, potential-free NC contact) only for pumps for which P2 180 W) for full motor protection in all speed levels with optional tripping unit SK 602N/SK 622N

Direction of rotation control light (only for 3~pumps )

Display of selected speed stage

Dual pump management (twin-head pump or 2 x single pumps)

Main/standby operation or parallel operation (for automatic fault-actuated switchover/time-dependent pump cycling, a corresponding switchgear must be provided on-site)

Equipment

For flange-end pumps: Flange versions

Standard version for DN 40 to DN 65 pumps: PN 6/10 combination flange (PN 16 flange according to EN 1092-2) for PN 6 and PN 16 counter flanges,

Standard version for DN 80/DN 100 pumps: PN 6 flange (engineered for PN 16 according to EN 1092-2) for PN 6 counter flange

Cable inlet possible from both sides (only for 1~pumps and 3~pumps with P2180 W)

Thermal insulation as standard for heating applications

Type key

Example:

TOPS 40/10

TOP-S

Standard pump (screw-end pump or flange-end pump)

40/

Nominal connection diameter

10

Nominal delivery head [m] at Q = 0 m³/ h
wishlist Compare
£999.60 RRP £649.74 £541.45
3 week lead time

Free Standard Delivery
2046666
Wilo - TOP-S 40/7 REPLACEMENT Head - 400V - 3 Phase
Please ensure Top-S replacement head part is appropriate for your pump model. Replacement heads unfortunately CANNOT be returned if they have been attempted to be fitted. If unsure please contact 0800 008 6405.

Can be utilised for Hot-water heating systems of all sorts, industrial circulation systems, air-conditioning systems and closed cooling circuits.

Maintenance-free glandless circulation pump with threaded or flange connection, pre-selectable speed stages for power adjustment.
Item includes:
Pump, Thermal insulation, Including seals for threaded connection, Washers for flange screws (for nominal connection diameters DN 40 - DN 65), and Installation manual and operating instructions.

Advantages:

Direction of rotation signal lamp for displaying the correct sense of rotation (only with 3~), Manual power adjustment with 3 speed stages, and Pump housing with cataphoretic coating (KTL) protects against corrosion due to condensation formation.

Tech Info

Permitted temperature range -20 C to +130 C, for short periods (2 h) to +140 C (TOP-S 25/13, 80/15, 80/20: -20 C to +110 C)

Mains connection:

1~230 V, 50 Hz (depending on type)

3~230 V, 50 Hz (with optional switching plug)

3~400 V, 50 Hz

Protection class IP X4D

Screwed connection or flange connection (depending on type) Rp 1 to DN 100

Max. operating pressure of standard version: 6/10 bar. or 6 bar. (special version: 10 bar.)

Materials

Pump housing: Grey Cast Iron

Impeller: Plastic

Shaft: Stainless Steel

Bearing: Carbon, metal impregnated

Construction:
Glandless circulation pump with screwed connection or flange connection.

Application
Hot-water heating systems of all sorts, industrial circulation systems, air-conditioning systems and closed cooling circuits

Equipment/function
Operating modes

Speed-stage switching

Manual functions

Setting the speed stages: 3 speed stages (2 speed stages for 1~ pumps with P2 350 W)

Automatic functions

Internal protection against non-approved high winding temperatures (only for pumps for which P2 180 W)

Signal and display functions

Thermal winding contact (WSK, potential-free NC contact) only for pumps for which P2 180 W) for full motor protection in all speed levels with optional tripping unit SK 602N/SK 622N

Direction of rotation control light (only for 3~pumps )

Display of selected speed stage

Dual pump management (twin-head pump or 2 x single pumps)

Main/standby operation or parallel operation (for automatic fault-actuated switchover/time-dependent pump cycling, a corresponding switchgear must be provided on-site)

Equipment

For flange-end pumps: Flange versions

Standard version for DN 40 to DN 65 pumps: PN 6/10 combination flange (PN 16 flange according to EN 1092-2) for PN 6 and PN 16 counter flanges,

Standard version for DN 80/DN 100 pumps: PN 6 flange (engineered for PN 16 according to EN 1092-2) for PN 6 counter flange

Cable inlet possible from both sides (only for 1~pumps and 3~pumps with P2180 W)

Thermal insulation as standard for heating applications

Type key

Example:

TOPS 40/10

TOP-S

Standard pump (screw-end pump or flange-end pump)

40/

Nominal connection diameter

10

Nominal delivery head [m] at Q = 0 m³/ h
wishlist Compare
£1,084.80 RRP £705.12 £587.60
In stock

Free Standard Delivery
2046672
Wilo - TOP-S 50/7 REPLACEMENT Head - 400V - 3 Phase
Please ensure Top-S replacement head part is appropriate for your pump model. Replacement heads unfortunately CANNOT be returned if they have been attempted to be fitted. If unsure please contact 0800 008 6405.

Can be utilised for Hot-water heating systems of all sorts, industrial circulation systems, air-conditioning systems and closed cooling circuits.

Maintenance-free glandless circulation pump with threaded or flange connection, pre-selectable speed stages for power adjustment.
Item includes:
Pump, Thermal insulation, Including seals for threaded connection, Washers for flange screws (for nominal connection diameters DN 40 - DN 65), and Installation manual and operating instructions.

Advantages:

Direction of rotation signal lamp for displaying the correct sense of rotation (only with 3~), Manual power adjustment with 3 speed stages, and Pump housing with cataphoretic coating (KTL) protects against corrosion due to condensation formation.

Tech Info

Permitted temperature range -20 C to +130 C, for short periods (2 h) to +140 C (TOP-S 25/13, 80/15, 80/20: -20 C to +110 C)

Mains connection:

1~230 V, 50 Hz (depending on type)

3~230 V, 50 Hz (with optional switching plug)

3~400 V, 50 Hz

Protection class IP X4D

Screwed connection or flange connection (depending on type) Rp 1 to DN 100

Max. operating pressure of standard version: 6/10 bar. or 6 bar. (special version: 10 bar.)

Materials

Pump housing: Grey Cast Iron

Impeller: Plastic

Shaft: Stainless Steel

Bearing: Carbon, metal impregnated

Construction:
Glandless circulation pump with screwed connection or flange connection.

Application
Hot-water heating systems of all sorts, industrial circulation systems, air-conditioning systems and closed cooling circuits

Equipment/function
Operating modes

Speed-stage switching

Manual functions

Setting the speed stages: 3 speed stages (2 speed stages for 1~ pumps with P2 350 W)

Automatic functions

Internal protection against non-approved high winding temperatures (only for pumps for which P2 180 W)

Signal and display functions

Thermal winding contact (WSK, potential-free NC contact) only for pumps for which P2 180 W) for full motor protection in all speed levels with optional tripping unit SK 602N/SK 622N

Direction of rotation control light (only for 3~pumps )

Display of selected speed stage

Dual pump management (twin-head pump or 2 x single pumps)

Main/standby operation or parallel operation (for automatic fault-actuated switchover/time-dependent pump cycling, a corresponding switchgear must be provided on-site)

Equipment

For flange-end pumps: Flange versions

Standard version for DN 40 to DN 65 pumps: PN 6/10 combination flange (PN 16 flange according to EN 1092-2) for PN 6 and PN 16 counter flanges,

Standard version for DN 80/DN 100 pumps: PN 6 flange (engineered for PN 16 according to EN 1092-2) for PN 6 counter flange

Cable inlet possible from both sides (only for 1~pumps and 3~pumps with P2180 W)

Thermal insulation as standard for heating applications

Type key

Example:

TOPS 40/10

TOP-S

Standard pump (screw-end pump or flange-end pump)

40/

Nominal connection diameter

10

Nominal delivery head [m] at Q = 0 m³/ h
wishlist Compare
£1,852.80 RRP £1,204.32 £1,003.60
In stock

Free Standard Delivery
2046673
Wilo - TOP-S 50/10 REPLACEMENT Head - 400V - 3 Phase
Please ensure Top-S replacement head part is appropriate for your pump model. Replacement heads unfortunately CANNOT be returned if they have been attempted to be fitted. If unsure please contact 0800 008 6405.

Can be utilised for Hot-water heating systems of all sorts, industrial circulation systems, air-conditioning systems and closed cooling circuits.

Maintenance-free glandless circulation pump with threaded or flange connection, pre-selectable speed stages for power adjustment.
Item includes:
Pump, Thermal insulation, Including seals for threaded connection, Washers for flange screws (for nominal connection diameters DN 40 - DN 65), and Installation manual and operating instructions.

Advantages:

Direction of rotation signal lamp for displaying the correct sense of rotation (only with 3~), Manual power adjustment with 3 speed stages, and Pump housing with cataphoretic coating (KTL) protects against corrosion due to condensation formation.

Tech Info

Permitted temperature range -20 C to +130 C, for short periods (2 h) to +140 C (TOP-S 25/13, 80/15, 80/20: -20 C to +110 C)

Mains connection:

1~230 V, 50 Hz (depending on type)

3~230 V, 50 Hz (with optional switching plug)

3~400 V, 50 Hz

Protection class IP X4D

Screwed connection or flange connection (depending on type) Rp 1 to DN 100

Max. operating pressure of standard version: 6/10 bar. or 6 bar. (special version: 10 bar.)

Materials

Pump housing: Grey Cast Iron

Impeller: Plastic

Shaft: Stainless Steel

Bearing: Carbon, metal impregnated

Construction:
Glandless circulation pump with screwed connection or flange connection.

Application
Hot-water heating systems of all sorts, industrial circulation systems, air-conditioning systems and closed cooling circuits

Equipment/function
Operating modes

Speed-stage switching

Manual functions

Setting the speed stages: 3 speed stages (2 speed stages for 1~ pumps with P2 350 W)

Automatic functions

Internal protection against non-approved high winding temperatures (only for pumps for which P2 180 W)

Signal and display functions

Thermal winding contact (WSK, potential-free NC contact) only for pumps for which P2 180 W) for full motor protection in all speed levels with optional tripping unit SK 602N/SK 622N

Direction of rotation control light (only for 3~pumps )

Display of selected speed stage

Dual pump management (twin-head pump or 2 x single pumps)

Main/standby operation or parallel operation (for automatic fault-actuated switchover/time-dependent pump cycling, a corresponding switchgear must be provided on-site)

Equipment

For flange-end pumps: Flange versions

Standard version for DN 40 to DN 65 pumps: PN 6/10 combination flange (PN 16 flange according to EN 1092-2) for PN 6 and PN 16 counter flanges,

Standard version for DN 80/DN 100 pumps: PN 6 flange (engineered for PN 16 according to EN 1092-2) for PN 6 counter flange

Cable inlet possible from both sides (only for 1~pumps and 3~pumps with P2180 W)

Thermal insulation as standard for heating applications

Type key

Example:

TOPS 40/10

TOP-S

Standard pump (screw-end pump or flange-end pump)

40/

Nominal connection diameter

10

Nominal delivery head [m] at Q = 0 m³/ h
wishlist Compare
£1,863.60 RRP £1,211.34 £1,009.45
In stock

Free Standard Delivery
2046674
Wilo - TOP-S 50/15 REPLACEMENT Head - 400V - 3 Phase
Please ensure Top-S replacement head part is appropriate for your pump model. Replacement heads unfortunately CANNOT be returned if they have been attempted to be fitted. If unsure please contact 0800 008 6405.

Can be utilised for Hot-water heating systems of all sorts, industrial circulation systems, air-conditioning systems and closed cooling circuits.

Maintenance-free glandless circulation pump with threaded or flange connection, pre-selectable speed stages for power adjustment.
Item includes:
Pump, Thermal insulation, Including seals for threaded connection, Washers for flange screws (for nominal connection diameters DN 40 - DN 65), and Installation manual and operating instructions.

Advantages:

Direction of rotation signal lamp for displaying the correct sense of rotation (only with 3~), Manual power adjustment with 3 speed stages, and Pump housing with cataphoretic coating (KTL) protects against corrosion due to condensation formation.

Tech Info

Permitted temperature range -20 C to +130 C, for short periods (2 h) to +140 C (TOP-S 25/13, 80/15, 80/20: -20 C to +110 C)

Mains connection:

1~230 V, 50 Hz (depending on type)

3~230 V, 50 Hz (with optional switching plug)

3~400 V, 50 Hz

Protection class IP X4D

Screwed connection or flange connection (depending on type) Rp 1 to DN 100

Max. operating pressure of standard version: 6/10 bar. or 6 bar. (special version: 10 bar.)

Materials

Pump housing: Grey Cast Iron

Impeller: Plastic

Shaft: Stainless Steel

Bearing: Carbon, metal impregnated

Construction:
Glandless circulation pump with screwed connection or flange connection.

Application
Hot-water heating systems of all sorts, industrial circulation systems, air-conditioning systems and closed cooling circuits

Equipment/function
Operating modes

Speed-stage switching

Manual functions

Setting the speed stages: 3 speed stages (2 speed stages for 1~ pumps with P2 350 W)

Automatic functions

Internal protection against non-approved high winding temperatures (only for pumps for which P2 180 W)

Signal and display functions

Thermal winding contact (WSK, potential-free NC contact) only for pumps for which P2 180 W) for full motor protection in all speed levels with optional tripping unit SK 602N/SK 622N

Direction of rotation control light (only for 3~pumps )

Display of selected speed stage

Dual pump management (twin-head pump or 2 x single pumps)

Main/standby operation or parallel operation (for automatic fault-actuated switchover/time-dependent pump cycling, a corresponding switchgear must be provided on-site)

Equipment

For flange-end pumps: Flange versions

Standard version for DN 40 to DN 65 pumps: PN 6/10 combination flange (PN 16 flange according to EN 1092-2) for PN 6 and PN 16 counter flanges,

Standard version for DN 80/DN 100 pumps: PN 6 flange (engineered for PN 16 according to EN 1092-2) for PN 6 counter flange

Cable inlet possible from both sides (only for 1~pumps and 3~pumps with P2180 W)

Thermal insulation as standard for heating applications

Type key

Example:

TOPS 40/10

TOP-S

Standard pump (screw-end pump or flange-end pump)

40/

Nominal connection diameter

10

Nominal delivery head [m] at Q = 0 m³/ h
wishlist Compare
£2,589.60 RRP £1,683.24 £1,402.70
In stock

Free Standard Delivery
2046675/29991433
Wilo - TOP-S 65/7 REPLACEMENT Head - 400V - 3 Phase
Please ensure Top-S replacement head part is appropriate for your pump model. Replacement heads unfortunately CANNOT be returned if they have been attempted to be fitted. If unsure please contact 0800 008 6405.

Can be utilised for Hot-water heating systems of all sorts, industrial circulation systems, air-conditioning systems and closed cooling circuits.

Maintenance-free glandless circulation pump with threaded or flange connection, pre-selectable speed stages for power adjustment.
Item includes:
Pump, Thermal insulation, Including seals for threaded connection, Washers for flange screws (for nominal connection diameters DN 40 - DN 65), and Installation manual and operating instructions.

Advantages:

Direction of rotation signal lamp for displaying the correct sense of rotation (only with 3~), Manual power adjustment with 3 speed stages, and Pump housing with cataphoretic coating (KTL) protects against corrosion due to condensation formation.

Tech Info

Permitted temperature range -20 C to +130 C, for short periods (2 h) to +140 C (TOP-S 25/13, 80/15, 80/20: -20 C to +110 C)

Mains connection:

1~230 V, 50 Hz (depending on type)

3~230 V, 50 Hz (with optional switching plug)

3~400 V, 50 Hz

Protection class IP X4D

Screwed connection or flange connection (depending on type) Rp 1 to DN 100

Max. operating pressure of standard version: 6/10 bar. or 6 bar. (special version: 10 bar.)

Materials

Pump housing: Grey Cast Iron

Impeller: Plastic

Shaft: Stainless Steel

Bearing: Carbon, metal impregnated

Construction:
Glandless circulation pump with screwed connection or flange connection.

Application
Hot-water heating systems of all sorts, industrial circulation systems, air-conditioning systems and closed cooling circuits

Equipment/function
Operating modes

Speed-stage switching

Manual functions

Setting the speed stages: 3 speed stages (2 speed stages for 1~ pumps with P2 350 W)

Automatic functions

Internal protection against non-approved high winding temperatures (only for pumps for which P2 180 W)

Signal and display functions

Thermal winding contact (WSK, potential-free NC contact) only for pumps for which P2 180 W) for full motor protection in all speed levels with optional tripping unit SK 602N/SK 622N

Direction of rotation control light (only for 3~pumps )

Display of selected speed stage

Dual pump management (twin-head pump or 2 x single pumps)

Main/standby operation or parallel operation (for automatic fault-actuated switchover/time-dependent pump cycling, a corresponding switchgear must be provided on-site)

Equipment

For flange-end pumps: Flange versions

Standard version for DN 40 to DN 65 pumps: PN 6/10 combination flange (PN 16 flange according to EN 1092-2) for PN 6 and PN 16 counter flanges,

Standard version for DN 80/DN 100 pumps: PN 6 flange (engineered for PN 16 according to EN 1092-2) for PN 6 counter flange

Cable inlet possible from both sides (only for 1~pumps and 3~pumps with P2180 W)

Thermal insulation as standard for heating applications

Type key

Example:

TOPS 40/10

TOP-S

Standard pump (screw-end pump or flange-end pump)

40/

Nominal connection diameter

10

Nominal delivery head [m] at Q = 0 m³/ h
wishlist Compare
£1,807.20 RRP £1,174.68 £978.90
In stock

Free Standard Delivery
2046676 / 29991437
Wilo - TOP-S 65/10 REPLACEMENT Head - 400V - 3 Phase
Please ensure Top-S replacement head part is appropriate for your pump model. Replacement heads unfortunately CANNOT be returned if they have been attempted to be fitted. If unsure please contact 0800 008 6405.

Can be utilised for Hot-water heating systems of all sorts, industrial circulation systems, air-conditioning systems and closed cooling circuits.

Maintenance-free glandless circulation pump with threaded or flange connection, pre-selectable speed stages for power adjustment.
Item includes:
Pump, Thermal insulation, Including seals for threaded connection, Washers for flange screws (for nominal connection diameters DN 40 - DN 65), and Installation manual and operating instructions.

Advantages:

Direction of rotation signal lamp for displaying the correct sense of rotation (only with 3~), Manual power adjustment with 3 speed stages, and Pump housing with cataphoretic coating (KTL) protects against corrosion due to condensation formation.

Tech Info

Permitted temperature range -20 C to +130 C, for short periods (2 h) to +140 C (TOP-S 25/13, 80/15, 80/20: -20 C to +110 C)

Mains connection:

1~230 V, 50 Hz (depending on type)

3~230 V, 50 Hz (with optional switching plug)

3~400 V, 50 Hz

Protection class IP X4D

Screwed connection or flange connection (depending on type) Rp 1 to DN 100

Max. operating pressure of standard version: 6/10 bar. or 6 bar. (special version: 10 bar.)

Materials

Pump housing: Grey Cast Iron

Impeller: Plastic

Shaft: Stainless Steel

Bearing: Carbon, metal impregnated

Construction:
Glandless circulation pump with screwed connection or flange connection.

Application
Hot-water heating systems of all sorts, industrial circulation systems, air-conditioning systems and closed cooling circuits

Equipment/function
Operating modes

Speed-stage switching

Manual functions

Setting the speed stages: 3 speed stages (2 speed stages for 1~ pumps with P2 350 W)

Automatic functions

Internal protection against non-approved high winding temperatures (only for pumps for which P2 180 W)

Signal and display functions

Thermal winding contact (WSK, potential-free NC contact) only for pumps for which P2 180 W) for full motor protection in all speed levels with optional tripping unit SK 602N/SK 622N

Direction of rotation control light (only for 3~pumps )

Display of selected speed stage

Dual pump management (twin-head pump or 2 x single pumps)

Main/standby operation or parallel operation (for automatic fault-actuated switchover/time-dependent pump cycling, a corresponding switchgear must be provided on-site)

Equipment

For flange-end pumps: Flange versions

Standard version for DN 40 to DN 65 pumps: PN 6/10 combination flange (PN 16 flange according to EN 1092-2) for PN 6 and PN 16 counter flanges,

Standard version for DN 80/DN 100 pumps: PN 6 flange (engineered for PN 16 according to EN 1092-2) for PN 6 counter flange

Cable inlet possible from both sides (only for 1~pumps and 3~pumps with P2180 W)

Thermal insulation as standard for heating applications

Type key

Example:

TOPS 40/10

TOP-S

Standard pump (screw-end pump or flange-end pump)

40/

Nominal connection diameter

10

Nominal delivery head [m] at Q = 0 m³/ h
wishlist Compare
£2,230.80 RRP £1,450.02 £1,208.35
In stock

Free Standard Delivery
WILO-29991442
Wilo - TOP-S 80/10 REPLACEMENT Head - 3 Phase
Please ensure Top-S replacement head part is appropriate for your pump model. Replacement heads unfortunately CANNOT be returned if they have been attempted to be fitted. If unsure please contact 0800 008 6405.

Can be utilised for Hot-water heating systems of all sorts, industrial circulation systems, air-conditioning systems and closed cooling circuits.

Maintenance-free glandless circulation pump with threaded or flange connection, pre-selectable speed stages for power adjustment.
Item includes:
Pump, Thermal insulation, Including seals for threaded connection, Washers for flange screws (for nominal connection diameters DN 40 - DN 65), and Installation manual and operating instructions.

Advantages:

Direction of rotation signal lamp for displaying the correct sense of rotation (only with 3~), Manual power adjustment with 3 speed stages, and Pump housing with cataphoretic coating (KTL) protects against corrosion due to condensation formation.

Tech Info

Permitted temperature range -20 C to +130 C, for short periods (2 h) to +140 C (TOP-S 25/13, 80/15, 80/20: -20 C to +110 C)

Mains connection:

1~230 V, 50 Hz (depending on type)

3~230 V, 50 Hz (with optional switching plug)

3~400 V, 50 Hz

Protection class IP X4D

Screwed connection or flange connection (depending on type) Rp 1 to DN 100

Max. operating pressure of standard version: 6/10 bar. or 6 bar. (special version: 10 bar.)

Materials

Pump housing: Grey Cast Iron

Impeller: Plastic

Shaft: Stainless Steel

Bearing: Carbon, metal impregnated

Construction:
Glandless circulation pump with screwed connection or flange connection.

Application
Hot-water heating systems of all sorts, industrial circulation systems, air-conditioning systems and closed cooling circuits

Equipment/function
Operating modes

Speed-stage switching

Manual functions

Setting the speed stages: 3 speed stages (2 speed stages for 1~ pumps with P2 350 W)

Automatic functions

Internal protection against non-approved high winding temperatures (only for pumps for which P2 180 W)

Signal and display functions

Thermal winding contact (WSK, potential-free NC contact) only for pumps for which P2 180 W) for full motor protection in all speed levels with optional tripping unit SK 602N/SK 622N

Direction of rotation control light (only for 3~pumps )

Display of selected speed stage

Dual pump management (twin-head pump or 2 x single pumps)

Main/standby operation or parallel operation (for automatic fault-actuated switchover/time-dependent pump cycling, a corresponding switchgear must be provided on-site)

Equipment

For flange-end pumps: Flange versions

Standard version for DN 40 to DN 65 pumps: PN 6/10 combination flange (PN 16 flange according to EN 1092-2) for PN 6 and PN 16 counter flanges,

Standard version for DN 80/DN 100 pumps: PN 6 flange (engineered for PN 16 according to EN 1092-2) for PN 6 counter flange

Cable inlet possible from both sides (only for 1~pumps and 3~pumps with P2180 W)

Thermal insulation as standard for heating applications

Type key

Example:

TOPS 40/10

TOP-S

Standard pump (screw-end pump or flange-end pump)

40/

Nominal connection diameter

10

Nominal delivery head [m] at Q = 0 m³/ h
wishlist Compare
£2,943.60 RRP £1,913.34 £1,594.45
In stock

Free Standard Delivery
2048321/29991402
Wilo - TOP-S 25/7 REPLACEMENT Head - 400V - 3 Phase
Please ensure Top-S replacement head part is appropriate for your pump model. Replacement heads unfortunately CANNOT be returned if they have been attempted to be fitted. If unsure please contact 0800 008 6405.

Can be utilised for Hot-water heating systems of all sorts, industrial circulation systems, air-conditioning systems and closed cooling circuits.

Maintenance-free glandless circulation pump with threaded or flange connection, pre-selectable speed stages for power adjustment.
Item includes:
Pump, Thermal insulation, Including seals for threaded connection, Washers for flange screws (for nominal connection diameters DN 40 - DN 65), and Installation manual and operating instructions.

Advantages:

Direction of rotation signal lamp for displaying the correct sense of rotation (only with 3~), Manual power adjustment with 3 speed stages, and Pump housing with cataphoretic coating (KTL) protects against corrosion due to condensation formation.

Tech Info

Permitted temperature range -20 C to +130 C, for short periods (2 h) to +140 C (TOP-S 25/13, 80/15, 80/20: -20 C to +110 C)

Mains connection:

1~230 V, 50 Hz (depending on type)

3~230 V, 50 Hz (with optional switching plug)

3~400 V, 50 Hz

Protection class IP X4D

Screwed connection or flange connection (depending on type) Rp 1 to DN 100

Max. operating pressure of standard version: 6/10 bar. or 6 bar. (special version: 10 bar.)

Materials

Pump housing: Grey Cast Iron

Impeller: Plastic

Shaft: Stainless Steel

Bearing: Carbon, metal impregnated

Construction:
Glandless circulation pump with screwed connection or flange connection.

Application
Hot-water heating systems of all sorts, industrial circulation systems, air-conditioning systems and closed cooling circuits

Equipment/function
Operating modes

Speed-stage switching

Manual functions

Setting the speed stages: 3 speed stages (2 speed stages for 1~ pumps with P2 350 W)

Automatic functions

Internal protection against non-approved high winding temperatures (only for pumps for which P2 180 W)

Signal and display functions

Thermal winding contact (WSK, potential-free NC contact) only for pumps for which P2 180 W) for full motor protection in all speed levels with optional tripping unit SK 602N/SK 622N

Direction of rotation control light (only for 3~pumps )

Display of selected speed stage

Dual pump management (twin-head pump or 2 x single pumps)

Main/standby operation or parallel operation (for automatic fault-actuated switchover/time-dependent pump cycling, a corresponding switchgear must be provided on-site)

Equipment

For flange-end pumps: Flange versions

Standard version for DN 40 to DN 65 pumps: PN 6/10 combination flange (PN 16 flange according to EN 1092-2) for PN 6 and PN 16 counter flanges,

Standard version for DN 80/DN 100 pumps: PN 6 flange (engineered for PN 16 according to EN 1092-2) for PN 6 counter flange

Cable inlet possible from both sides (only for 1~pumps and 3~pumps with P2180 W)

Thermal insulation as standard for heating applications

Type key

Example:

TOPS 40/10

TOP-S

Standard pump (screw-end pump or flange-end pump)

40/

Nominal connection diameter

10

Nominal delivery head [m] at Q = 0 m³/ h
wishlist Compare
£650.40 RRP £422.76 £352.30
In stock

Free Standard Delivery
WIL-4148418
Wilo - Economy MHIE 406N-2G EPDM 1.4301 Centrifugal Pump - 400V - Three Phase - Obsolete

Order the Wilo - Economy MHIIE 406N-2G EPDM 1.4301 Centrifugal Pump from Pumpify and recieve free standard delivery.

Need techinical advice on the product? Give our technical team a call on: 0800 008 6405

Multistage, non-self-priming, horizontal high-pressure Centrifugal Pump in block design with horizontal suction port and vertical pressure port and built-in, air-cooled frequency converter. The integrated frequency converter enables variable speed, pressure and PID control.

Speed control

"Speed control" : Manually with green button or via external signals, "Differential pressure, constant" : Pressure control with pressure sensor, setpoint adjustment via green button or via external signals, and "PID control": other constant control variables (temperature, volume flow, pressure....) with sensor, setpoint adjustment with green button, by means of external signals.

The electronic module delivers various protective functions. They include overload protection, the detection of low water, mains undervoltage or overvoltage, high ambient temperature, missing phases, blocked pumps and short-circuits. Error messages are issued on the display.

Short-circuit-proof +24 V voltage output with max. contact strength of 30 mA is present on the electronic module. The module has potential-free contacts for SSM, red and green LED for ON/OFF signal.

wishlist Compare

Out Of Stock

Free Standard Delivery
WIL-4148424
Wilo - Economy MHIE 803N-2G EPDM 1.4301 Multistage Centrifugal Pump - 400V - Three Phase

2.2KW three phase multistage Centrifugal Pump, with 1 1/4" threaded connections.

Need techinical advice before purchasing this pump? Contact our technical suppport team on: 0800 008 6405

wishlist Compare

£5,436.00 RRP £3,370.32 £2,808.60

In stock

Free Standard Delivery
WIL-2121218
Wilo - Veroline IPL 65/115-1,5/2 IE3 Centrifugal Pump - 1.5 kW

Single-stage glanded centrifugal pump with compact in-line design with directly flanged three-phase current motor and one-piece shaft or with lantern and standard motor rigidly connected by coupling (N version). The IPL series is suitable for pipe installation or installation on a base. Mounting brackets are available as accessories. With force-flushed circulation, bidirectional bellows mechanical seal and cavitation-reducing plastic impeller.
Flanges with pressure measuring connections R 1/8. The pump housing and lantern are cataphoretic-coated.
The motor terminal box can be made of metal or plastic. If a metal terminal box is absolutely necessary, please order the appropriate special variant.

wishlist Compare

£2,367.60 RRP £1,420.56 £1,183.80

In stock

Free Standard Delivery
WIL-2121201
Wilo - Veroline IPL 40/120-1.5/2 Centrifugal Pump - 1.50 kW

Single-stage glanded centrifugal pump with compact in-line design with directly flanged three-phase current motor and one-piece shaft or with lantern and standard motor rigidly connected by coupling (N version). The IPL series is suitable for pipe installation or installation on a base. Mounting brackets are available as accessories. With force-flushed circulation, bidirectional bellows mechanical seal and cavitation-reducing plastic impeller.
Flanges with pressure measuring connections R 1/8. The pump housing and lantern are cataphoretic-coated.
The motor terminal box can be made of metal or plastic. If a metal terminal box is absolutely necessary, please order the appropriate special variant.

wishlist Compare

£1,750.80 RRP £1,050.48 £875.40

In stock

Free Standard Delivery
WIL-2089585
Wilo - Veroline IPL 40/115-0.55/2 -IE3 Centrifugal Pump - 0.55 kW

Single-stage glanded centrifugal pump with compact in-line design with directly flanged three-phase current motor and one-piece shaft or with lantern and standard motor rigidly connected by coupling (N version). The IPL series is suitable for pipe installation or installation on a base. Mounting brackets are available as accessories. With force-flushed circulation, bidirectional bellows mechanical seal and cavitation-reducing plastic impeller.
Flanges with pressure measuring connections R 1/8. The pump housing and lantern are cataphoretic-coated.
The motor terminal box can be made of metal or plastic. If a metal terminal box is absolutely necessary, please order the appropriate special variant.

wishlist Compare

£1,627.20 RRP £976.32 £813.60

In stock

Free Standard Delivery
WIL-2152442
Wilo - Veroline IPL 50/95-0,55/2 Centrifugal Pump - 0.55 kW

Single-stage glanded centrifugal pump with compact in-line design with directly flanged three-phase current motor and one-piece shaft or with lantern and standard motor rigidly connected by coupling (N version). The IPL series is suitable for pipe installation or installation on a base. Mounting brackets are available as accessories. With force-flushed circulation, bidirectional bellows mechanical seal and cavitation-reducing plastic impeller.
Flanges with pressure measuring connections R 1/8. The pump housing and lantern are cataphoretic-coated.
The motor terminal box can be made of metal or plastic. If a metal terminal box is absolutely necessary, please order the appropriate special variant.

wishlist Compare

£1,824.00 RRP £1,094.40 £912.00

In stock

Free Standard Delivery

WIL-2121194

Wilo - Veroline IPL 100/165-2,2/4 Centrifugal Pump - 2.20 kW

The Veroline IPL Centrifugal Pumps are a range of single-stage, low-pressure Centrifugal Pump in in line design with mechanical seal, flange connection with pressure measuring connection R 1/8 and motor with one-piece shaft.

Purchase from Pumpify and recieve free standard delivery.

Type key

Example	IPL 40/160-4/2
IPL	in line pump
40	Nominal diameter DN of the pipe connection
160	Nominal impeller diameter
4	Rated motor power P2 in kW
2	Number of poles

Your advantages

High standard of corrosion protection thanks to cataphoretic coating, Standard condensate drainage holes in the motor housings and lanterns, Series Product detail: motor with one-piece shaft, Version N: Standard motor V1 with Stainless Steel plug shaft, and Bidirectional, force-flushed mechanical seal.

Tech Info

Permissible temperature range -20 °C to +120 °C, Mains connection 3~400 V, 50 Hz (others on request), Protection class IP 55, Nominal diameter Rp 1 to DN 100, and Max. operating pressure 10 bar. (special version: 16 bar.).

Materials

Pump housing and lantern: EN-GJL-250
Impeller: PPO fibreglass-reinforced EN-GJL-200 (depending on pump type)
Shaft: 1.4021
Mechanical seal: AQEGG; other mechanical seals on request

wishlist Compare

£4,466.40 RRP £2,679.84 £2,233.20

In stock

Free Standard Delivery

Why Choose Pumpify

We get it. Anyone can talk a good game. But at Pumpify, we make sure your pumps, spares, and support actually delivers - every time.

13,000+ Products & Spares
Next-Day UK Mainland Delivery*
Free Delivery on Orders Over £50*
100% Genuine Products & Warranties
Expert Advice

Proof is in the pudding. We're trusted by the pros.

"I worked in marketing before my retirement. I have to say you are the best company for customer support and service I have ever come across. Well done!"

- Terence Ashmore

"Good buying experience. Arrived on time and represents value for money. Refill pack eco friendly and easy to install"

- Anthony Jarvis

"Very honest: order was delayed but they put their hand up and got it resolved. Kept me informed and I eventually got my order."

- Sanjay M.

"2nd time of ordering. Order placed on Wednesday, order received on Thursday. Great service. Would recommend"

- Rebecca

"Lorem ipsum dolor sit amet consectetur. Felis imperdiet fermentum faucibus at quis non sit. Elit integer imperdiet et egestas massa mauris. Dolor."

- Name

"Received it today, many thanks for super fast delivery. Your customer service is exceptional which will be in my feedback. Many thanks for your help Bob"

- Bob

"You know, I actually believe you do care about your customers. Its not just marketing. God bless you all and Merry Christmas to the whole team."

- Paul Nicholls

"I have to state that the service you provided is just perfect and i will not hesitate recommending you to all-comers."

- Anthony B

Need Advice?

Need Advice?

Need Advice?

Need Advice?

Wilo

Example:	TOPS 40/10
TOP-S	Standard pump (screw-end pump or flange-end pump)
40/	Nominal connection diameter
10	Nominal delivery head [m] at Q = 0 m³/ h