The Stravo - AGMA Level Switch (SKU 12-40-1021) is a compact and reliable solution for precise liquid level control in various industrial Uses. This innovative device offers accurate and consistent dynamic performance in detecting and managing fluid levels across a wide range of environments.

The AGMA float-switch has a switch actuated by a floating cylinder, housed within a tube. Compact, with fixed on and off levels for precise level control, it is intended for narrow sumps and fixed installations.

The Stravo - Sensor Level Sensor (SKU 10-40-1003) is an innovative electronic switch designed for efficient pump control in various Uses. This 110-volt model, with a power range of 0.40 to 0.48kW, offers reliable and automated liquid level detection for seamless pump operation.

The Stravo - Sensor Level Sensor (SKU 10-40-1005) is a cutting-edge electronic switch designed for efficient and reliable liquid level detection and control. This 0.75kW, 110-volt model offers robust dynamic performance in various Uses, combining advanced sensing technology with user-friendly operation.

The Stravo - Sensor Level Sensor (SKU 10-40-1001) is an innovative electronic switch designed for efficient and reliable liquid level detection and pump control. This 230-volt sensor offers a compact solution for various Uses requiring precise level monitoring and automated pump operation.

The simplest possible method for level control A mechanical switch in a plastic casing, freely suspended at the desired height from its own cable. This product is manufactured by Flygt. When the liquid level reaches the regulator, the casing will tilt and the mechanical switch will close or break the circuit, thereby starting or stopping a pump or actuating an alarm device. No wear, no maintenance

In sewage pumping stations, for ground water and drainage pumping — in fact, for most level control applications — the ENM-10 is the ideal solution. The regulator casing is made of polypropylene and the cable is sheathed with a special PVC or Nitrile/PVC rubber compound. The plastic components are welded and screwed together. Adhesive is never applied. Impurities and deposits will not adhere to the smooth casing.

The Flygt ENM-10 Float Switch - 6m is a Switch item. It is supplied with a 6m cable. It features a Float Switch.

The simplest possible method for level control A mechanical switch in a plastic casing, freely suspended at the desired height from its own cable. This product is manufactured by Flygt. When the liquid level reaches the regulator, the casing will tilt and the mechanical switch will close or break the circuit, thereby starting or stopping a pump or actuating an alarm device. No wear, no maintenance

In sewage pumping stations, for ground water and drainage pumping — in fact, for most level control applications — the ENM-10 is the ideal solution. The regulator casing is made of polypropylene and the cable is sheathed with a special PVC or Nitrile/PVC rubber compound. The plastic components are welded and screwed together. Adhesive is never applied. Impurities and deposits will not adhere to the smooth casing.

The Flygt ENM-10 Float Switch - 13m is a Float Switch item. It is supplied with a 13m cable. It features a Float Switch.

The simplest possible method for level control A mechanical switch in a plastic casing, freely suspended at the desired height from its own cable. This product is manufactured by Flygt. When the liquid level reaches the regulator, the casing will tilt and the mechanical switch will close or break the circuit, thereby starting or stopping a pump or actuating an alarm device. No wear, no maintenance

In sewage pumping stations, for ground water and drainage pumping — in fact, for most level control applications — the ENM-10 is the ideal solution. The regulator casing is made of polypropylene and the cable is sheathed with a special PVC or Nitrile/PVC rubber compound. The plastic components are welded and screwed together. Adhesive is never applied. Impurities and deposits will not adhere to the smooth casing.

The Flygt ENM-10 Float Switch - 20m is a Switch item. It is supplied with a 20m cable. It features a Float Switch.

Replacement reed switch suitable for all Monsoon Standard and Monsoon Universal pumps manufactured after 2008.

Contents:

• Reed Switch x1
• Strain Relief Bush x1
• Tie Wrap x1
• Screw Self Tapping 3.5mmx12mm x4
• Screw Self Tapping K40x16mm x4

Stuart Turner (est. 1906) is a UK manufacturer of water boosting and pressurisation systems. Their ranges include shower pumps, whole-house boosting sets and mains-pressure solutions. Typical applications are improving water pressure and flow in homes and light commercial buildings.

Unit Management Module

The Management Module remotely switches pumps without controls and can be utilised in both positive and negative head plumbing systems.
The pump incorporates a pressure switch to start a connected pump and a flow switch to stop the pump, ensuring a continuous supply of boosted water to all outlets without hunting. Incorporating pump run dry protection, the control module features a simple LED display for power on, pump running and fault indication.
The pump is supplied with a 70 mm long extension piece allowing the module to clear the pump terminal box.

Cable and gland with float switch for KSB AMA porter 500 and 600 Series

The KSB Cable & Gland with Float Switch - KSB AMA Porter 500 & 600 is a Spares item.

KSB (est. 1871) is a German manufacturer of pumps and valves for water, wastewater and industry. Product ranges include centrifugal process pumps, booster systems and submersible sewage pumps. Typical applications include public water treatment, building services, industrial processing and power-generation-related water duties.

PM 1

The Grundfos PM 1 pressure manager is designed for self-operating start/stop control of Grundfos pumps and other water supply pumps. The PM 1 is appropriate for applications where start/stop of the pump unit according to consumption is needed. The PM 1 starts the pump when the start pressure is reached, and the pump keeps running as long as there is a flow.

The PM 1 offers dry-running protection and cycling alarm for increased safety.

PM 1

The Grundfos PM 1 pressure manager is designed for self-operating start/stop control of Grundfos pumps and other water supply pumps. The PM 1 is appropriate for applications where start/stop of the pump unit according to consumption is needed. The PM 1 starts the pump when the start pressure is reached, and the pump keeps running as long as there is a flow.

The PM 1 offers dry-running protection and cycling alarm for increased safety.

The simplest possible method for level control A mechanical switch in a plastic casing, freely suspended at the desired height from its own cable. This product is manufactured by Flygt. When the liquid level reaches the regulator, the casing will tilt and the mechanical switch will close or break the circuit, thereby starting or stopping a pump or actuating an alarm device. No wear, no maintenance

In sewage pumping stations, for ground water and drainage pumping — in fact, for most level control applications — the ENM-10 is the ideal solution. The regulator casing is made of polypropylene and the cable is sheathed with a special PVC or Nitrile/PVC rubber compound. The plastic components are welded and screwed together. Adhesive is never applied. Impurities and deposits will not adhere to the smooth casing.

The Flygt ENM-10 Float Switch - 30m is a Switch item. It is supplied with a 30m cable. It features a Float Switch.

Grundfos - Sololift Pressure Switch

This is a Spares/Kit item, please get in touch for product compatibility.

Grundfos (est. 1945) is a Danish pump manufacturer known for high-efficiency circulators, multistage boosters, borehole and wastewater pumps, plus packaged pressure systems. The range covers HVAC circulation, domestic hot water recirculation, pressure boosting, industrial water transfer and public water management, with strong focus on energy efficiency and intelligent controls.