Flamco

Built for sealed heating and cooling circuits, the Flamcovent Clean Smart combines high-efficiency air and dirt separation to protect boilers, pumps and control components while improving system performance.

The steel Smart core removes micro-bubbles and fine particulates with up to 60% better performance than conventional units, and its extremely low flow resistance helps cut pumping energy. Flanged connection to EN 1092-1 PN16; standard flow speed up to 3 m/s.

• Dual action: simultaneous air & dirt removal for stable operation
• Plant protection: reduces fouling and wear on boilers, pumps and valves
• Energy efficient: negligible pressure drop
• Magnetic assist: 25 neodymium magnets integrated in the dirt scraper

Built for sealed heating and cooling circuits, the Flamcovent Clean Smart combines high-efficiency air and dirt separation to protect boilers, pumps and control components while improving system performance.

The steel Smart core removes micro-bubbles and fine particulates with up to 60% better performance than conventional units, and its extremely low flow resistance helps cut pumping energy. Flanged connection to EN 1092-1 PN16; standard flow speed up to 3 m/s.

• Dual action: simultaneous air & dirt removal for stable operation
• Plant protection: reduces fouling and wear on boilers, pumps and valves
• Energy efficient: negligible pressure drop
• Magnetic assist: 25 neodymium magnets integrated in the dirt scraper

Built for sealed heating and cooling circuits, the Flamcovent Clean Smart combines high-efficiency air and dirt separation to protect boilers, pumps and control components while improving system performance.

The steel Smart core removes micro-bubbles and fine particulates with up to 60% better performance than conventional units, and its extremely low flow resistance helps cut pumping energy. Flanged connection to EN 1092-1 PN16; standard flow speed up to 3 m/s.

• Dual action: simultaneous air & dirt removal for stable operation
• Plant protection: reduces fouling and wear on boilers, pumps and valves
• Energy efficient: negligible pressure drop
• Magnetic assist: 25 neodymium magnets integrated in the dirt scraper

Built for sealed heating and cooling circuits, the Flamcovent Clean Smart combines high-efficiency air and dirt separation to protect boilers, pumps and control components while improving system performance.

The steel Smart core removes micro-bubbles and fine particulates with up to 60% better performance than conventional units, and its extremely low flow resistance helps cut pumping energy. Flanged connection to EN 1092-1 PN16; standard flow speed up to 3 m/s.

• Dual action: simultaneous air & dirt removal for stable operation
• Plant protection: reduces fouling and wear on boilers, pumps and valves
• Energy efficient: negligible pressure drop
• Magnetic assist: 25 neodymium magnets integrated in the dirt scraper

Built for sealed heating and cooling circuits, the Flamcovent Clean Smart combines high-efficiency air and dirt separation to protect boilers, pumps and control components while improving system performance.

The steel Smart core removes micro-bubbles and fine particulates with up to 60% better performance than conventional units, and its extremely low flow resistance helps cut pumping energy. Flanged connection to EN 1092-1 PN16; standard flow speed up to 3 m/s.

• Dual action: simultaneous air & dirt removal for stable operation
• Plant protection: reduces fouling and wear on boilers, pumps and valves
• Energy efficient: negligible pressure drop
• Magnetic assist: 25 neodymium magnets integrated in the dirt scraper

Built for sealed heating and cooling circuits, the Flamcovent Clean Smart combines high-efficiency air and dirt separation to protect boilers, pumps and control components while improving system performance.

The steel Smart core removes micro-bubbles and fine particulates with up to 60% better performance than conventional units, and its extremely low flow resistance helps cut pumping energy. Flanged connection to EN 1092-1 PN16; standard flow speed up to 3 m/s.

• Dual action: simultaneous air & dirt removal for stable operation
• Plant protection: reduces fouling and wear on boilers, pumps and valves
• Energy efficient: negligible pressure drop
• Magnetic assist: 25 neodymium magnets integrated in the dirt scraper

Built for sealed heating and cooling circuits, the Flamcovent Clean Smart combines high-efficiency air and dirt separation to protect boilers, pumps and control components while improving system performance.

The steel Smart core removes micro-bubbles and fine particulates with up to 60% better performance than conventional units, and its extremely low flow resistance helps cut pumping energy. Flanged connection to EN 1092-1 PN16; standard flow speed up to 3 m/s.

• Dual action: simultaneous air & dirt removal for stable operation
• Plant protection: reduces fouling and wear on boilers, pumps and valves
• Energy efficient: negligible pressure drop
• Magnetic assist: 25 neodymium magnets integrated in the dirt scraper

Built for sealed heating and cooling circuits, the Flamcovent Clean Smart combines high-efficiency air and dirt separation to protect boilers, pumps and control components while improving system performance.

The steel Smart core removes micro-bubbles and fine particulates with up to 60% better performance than conventional units, and its extremely low flow resistance helps cut pumping energy. Flanged connection to EN 1092-1 PN16; standard flow speed up to 3 m/s.

• Dual action: simultaneous air & dirt removal for stable operation
• Plant protection: reduces fouling and wear on boilers, pumps and valves
• Energy efficient: negligible pressure drop
• Magnetic assist: 25 neodymium magnets integrated in the dirt scraper

Built for sealed heating and cooling circuits, the Flamcovent Clean Smart combines high-efficiency air and dirt separation to protect boilers, pumps and control components while improving system performance.

The steel Smart core removes micro-bubbles and fine particulates with up to 60% better performance than conventional units, and its extremely low flow resistance helps cut pumping energy. Flanged connection to EN 1092-1 PN16; standard flow speed up to 3 m/s.

• Dual action: simultaneous air & dirt removal for stable operation
• Plant protection: reduces fouling and wear on boilers, pumps and valves
• Energy efficient: negligible pressure drop
• Magnetic assist: 25 neodymium magnets integrated in the dirt scraper

The compact, proven design has high efficiency and guaranteed operation for heating and air conditioning.

The water within the installation contains air which can form corrosion and reduce the thermal transfer.

A Flexvent is fitted at places where the air collects.

The cap of the Flexvent Super is conical in shape.

The advantage of this construction is that the clearance between the water level and venting valve is maximized.

Flamco (est. 1956) is a Dutch manufacturer of HVAC and plumbing system components, including expansion vessels, air separators and pressurisation accessories. Their ranges are used in heating and chilled-water circuits and potable water systems across domestic and commercial installations.

The Flexfiller Direct G4 is the latest in pumpless digital pressurisation technology for light commercial and residential buildings. Its a slim, wall-mounted pumpless top-up pressurisation unit, with a top-up flow rate of up to 14 l/min depending on the mains or boosted mains, water pressure. It is designed to be connected directly to a buildings incoming water supply using the included flexible hose. It is there to fill and maintain the pressure of a heating or chilled water system without the need for a pump

The unit comes with a user-friendly controller that displays all operating and error conditions comprehensibly and conveniently. It features extensive data storage for online and offline analysis, microprocessor control, and self-learning algorithms with a graphical display. It comes with MODBUS RTU and BACnet communication protocols as standard and has its key operating parameters password protected.

Features & Benefits:

• Silent, Pumpless pressurisation unit
• FIlls system from empty
• For systems up to 15,000 LItres
• Fluid protection category 4 backflow prevention
• ONscreen service reminder every 12 months
• Colours: Grey (RAL7016) and Red (RAL3002)
• Password protected
• PRessure setting in 0.1 bar. increments
• FLoor protection runtime limiter and excessive activation logging
• Volt free contact: common alarm (N/C or N/O) fully programable for specific alarms customisable via control unit)
• Extensive data storage online or offline analysis
• Advanced technology ensures the lowest power consumption, Long service life and easy maintenance
• Microprocessor control, self-learning with graphical display
• Max flow rate of 14 Ltr/min
• Connects directly to the mains (booster) water mains, via included flexible hose (Length: 400mm)

Advantages:

• Universal connection to drain fits 22 mm copper compression, 32mm PP push fit and 32mm PP solvent weld discharge pipe to BS 5254 or BS EN1451
• The user-friendly control unit displays all operating and error conditions in a logical and convinient way
• Four status LED indicators
• System safety valve monitoring
• Leak detection
• USage monitor, logs and counters
• MODBUS RTU and BACnet Communication Protocol via RS485
• Can be combined with Flamconnect Remote Service (Check with local sales office)
• Two 40cm flecible hoses (for mains and sealed system connection) included for easy installation

The SideFlow Clean is a partial flow filter for continuous cleaning of the system for central heating and cooling installations.

Connecting a SideFlow Clean to an installation ensures that a proportion (10% PICV) of the main flow is filtered, which means dirt and magnetite are captured through a combination of a filter bag and magnetic filtration.

Side stream filtration for the removal of magnetic and nonmagnetic suspended solids.

Quick and easy to install and maintain.

Simple to mount thanks to integrated wall fastening.

Flamco (est. 1956) is a Dutch manufacturer of HVAC and plumbing system components, including expansion vessels, air separators and pressurisation accessories. Their ranges are used in heating and chilled-water circuits and potable water systems across domestic and commercial installations.

Designed for mains-fed potable and fresh water systems, the Flamco Airfix D Expansion Vessel is a full flow-through potable vessel that prevents stagnation and nuisance safety-valve discharge by absorbing thermal expansion.

For use in potable water, or fresh-water installations.

The Airfix D expansion vessels operate in such a way that the water flows right through and they are continuously flushed with fresh water from the mains.

This prevents tepid, stagnant water from collecting in the vessel in which bacterial growth could occur.

Therefore, users can be assured of high quality potable water.

Applying an Airfix D expansion vessel to a water heater prevents the opening of the safety group or safety valve each time the potable water is heated.

A synthetic flow-through insert and the supplied brass flow-dividing T-piece (3 R ¾") divert all connection flow through the vessel, continuously flushing it to inhibit bacterial growth. The butyl diaphragm is taste/odour neutral, while corrosion-resistant internal coatings protect both water and nitrogen sides. Each vessel is factory tested, nitrogen pre-charged for longer pre-pressure retention, and internationally approved.

• Flow-through operation constant refresh prevents tepid, stagnant water
• Protects safety devices reduces safety-valve lift and leakage risk
• Potable-safe butyl diaphragm adds no colour, odour or taste
• Efficient & hygienic no waste of potable water during operation
• Durability vessel halves coated before assembly; clamp ring protected
• Nitrogen pre-charge for better long-term pressure stability
• Includes: special brass flow-dividing T-piece (3 R ¾")
• Optional: Airfixcontrol for quick annual pre-charge checks

Designed for mains-fed potable and fresh water systems, the Flamco Airfix D Expansion Vessel is a full flow-through potable vessel that prevents stagnation and nuisance safety-valve discharge by absorbing thermal expansion.

For use in potable water, or fresh-water installations.

The Airfix D expansion vessels operate in such a way that the water flows right through and they are continuously flushed with fresh water from the mains.

This prevents tepid, stagnant water from collecting in the vessel in which bacterial growth could occur.

Therefore, users can be assured of high quality potable water.

Applying an Airfix D expansion vessel to a water heater prevents the opening of the safety group or safety valve each time the potable water is heated.

A synthetic flow-through insert and the supplied brass flow-dividing T-piece (3 R ¾") divert all connection flow through the vessel, continuously flushing it to inhibit bacterial growth. The butyl diaphragm is taste/odour neutral, while corrosion-resistant internal coatings protect both water and nitrogen sides. Each vessel is factory tested, nitrogen pre-charged for longer pre-pressure retention, and internationally approved.

• Flow-through operation constant refresh prevents tepid, stagnant water
• Protects safety devices reduces safety-valve lift and leakage risk
• Potable-safe butyl diaphragm adds no colour, odour or taste
• Efficient & hygienic no waste of potable water during operation
• Durability vessel halves coated before assembly; clamp ring protected
• Nitrogen pre-charge for better long-term pressure stability
• Includes: special brass flow-dividing T-piece (3 R ¾")
• Optional: Airfixcontrol for quick annual pre-charge checks

Designed for mains-fed potable and fresh water systems, the Flamco Airfix D Expansion Vessel is a full flow-through potable vessel that prevents stagnation and nuisance safety-valve discharge by absorbing thermal expansion.

For use in potable water, or fresh-water installations.

The Airfix D expansion vessels operate in such a way that the water flows right through and they are continuously flushed with fresh water from the mains.

This prevents tepid, stagnant water from collecting in the vessel in which bacterial growth could occur.

Therefore, users can be assured of high quality potable water.

Applying an Airfix D expansion vessel to a water heater prevents the opening of the safety group or safety valve each time the potable water is heated.

A synthetic flow-through insert and the supplied brass flow-dividing T-piece (3 R ¾") divert all connection flow through the vessel, continuously flushing it to inhibit bacterial growth. The butyl diaphragm is taste/odour neutral, while corrosion-resistant internal coatings protect both water and nitrogen sides. Each vessel is factory tested, nitrogen pre-charged for longer pre-pressure retention, and internationally approved.

• Flow-through operation constant refresh prevents tepid, stagnant water
• Protects safety devices reduces safety-valve lift and leakage risk
• Potable-safe butyl diaphragm adds no colour, odour or taste
• Efficient & hygienic no waste of potable water during operation
• Durability vessel halves coated before assembly; clamp ring protected
• Nitrogen pre-charge for better long-term pressure stability
• Includes: special brass flow-dividing T-piece (3 R ¾")
• Optional: Airfixcontrol for quick annual pre-charge checks

Engineered for potable and general water services, the Flamco Airfix D-E Expansion Vessel uses a full flow-through construction to prevent stagnation and support hygienic, high-quality water delivery.

A replaceable butyl bladder (DIN 4807/5) is formulated to add no colour, odour or taste, while a coated two-way system connection ensures complete vessel flow-through with low pressure drop. The Airfix D-E includes a pressure gauge with blow-back protection, nitrogen pre-charge for long pre-pressure retention, and an anti-oxidation coating on the inside of the connection flange.

• Full flow-through design to minimise bacterial growth
• Potable-safe bladder — no impact on taste, colour or odour
• Nitrogen pre-charge for longer pressure stability
• Coated flange & two-way connection to prevent oxidation and ensure flushing