-
2164661
Wilo - Stratos Maxo-D 80/0,5-6 PN10 Glandless Twin Head Circulator Pump - 230V - Single Phase - 10 Bar. - 360mmPremium smart-pump Wilo-Stratos MAXO-D
High-efficiency in-line glandless twin-head pump with EC motor and electronic power adjustment. can be utilised for chilled water, heating water and water/glycol mixtures. Energy efficiency index (EEI) between ⤠0.17 and ⤠0.19 depending on pump type.
Control modes:
£9,104.40 RRP £5,917.86 £4,931.55
In stock
Free Standard Delivery
-
98958079
Grundfos - TP 80-120/2 B In-Line Hot Water Circulator Pump - 415V - Three Phase - 1000 Ltr/min. - Stainless SteelTP 80-120/2 AI-F-Z-BQQE-HW1
Single-stage, close-coupled, volute (centrifugal) pump unit with in-line suction and discharge ports of identical diameter. The pump is of the top-pull-out design, i.e. the power head (motor, pump head and impeller) can be removed for maintenance or service while the pump housing remains in the pipework. The pump is equipped with an unbalanced rubber bellows seal. The shaft seal is according to EN 12756. All pipework connection is via PN 6 DIN flanges (EN 1092-2 and ISO 7005-2). The pump is equipped with a fan-cooled asynchronous motor.
Suitable for: Commercial heating, Commercial air conditioning, District heating, District cooling, Industrial heating, Industrial cooling, Desalination, Drinking water treatment, Water distribution, Irrigation, Community water supply
£7,218.00 RRP £4,691.70 £3,909.75
In stock
Free Standard Delivery
-
96397037
Grundfos - TPE 50-710/2 S-A-F-A-BQQE-OX1 Variable Speed In-Line Circulator Pump - 415V - Three Phase - 1000 Ltr/min. - Cast IronTPE 50-710/2 S-A-F-A-BQQE-OW1
Single-stage, close-coupled, volute (centrifugal) pump unit with in-line suction and discharge ports of identical diameter. The pump is of the top-pull-out design, i.e. the power head (motor, pump head and impeller) can be removed for maintenance or service while the pump housing remains in the pipework. The pump is equipped with an unbalanced rubber bellows seal. The shaft seal is according to EN 12756. All pipework connection is via PN 16 DIN flanges (EN 1092-2 and ISO 7005-2). The pump is equipped with a fan-cooled asynchronous motor. The motor includes a frequency converter and PI controller in the motor terminal box. This enables continuously variable control of the motor speed, which again enables adaptation of the performance to a given requirement. The pump is equipped with a differential pressure sensor.
Suitable for: Commercial heating, Commercial air conditioning, District heating, District cooling, Industrial heating, Industrial cooling, Desalination, Drinking water treatment, Water distribution, Irrigation, Community water supply
£18,500.40 RRP £12,025.26 £10,021.05
In stock
Free Standard Delivery
-
98958082
Grundfos - TP 100-30/4 AI-F-Z-BQQE-EX3 Single Head In-Line Circulator Pump - 415V - Three Phase - 1000 Ltr/min. - Stainless SteelTP 100-30/4 AI-F-Z-BQQE-EW3
Single-stage, close-coupled, volute (centrifugal) pump unit with in-line suction and discharge ports of identical diameter. The pump is of the top-pull-out design, i.e. the power head (motor, pump head and impeller) can be removed for maintenance or service while the pump housing remains in the pipework. The pump is equipped with an unbalanced rubber bellows seal. The shaft seal is according to EN 12756. All pipework connection is via PN 6 DIN flanges (EN 1092-2 and ISO 7005-2). The pump is equipped with a fan-cooled asynchronous motor.
Suitable for: Commercial heating, Commercial air conditioning, District heating, District cooling, Industrial heating, Industrial cooling, Desalination, Drinking water treatment, Water distribution, Irrigation, Community water supply
£8,214.00 RRP £5,339.10 £4,449.25
In stock
Free Standard Delivery
-
96096440
Grundfos - TPE 50-710/2 A-F-A-BQQE-OX1 Variable Speed In-Line Circulator Pump - 415V - Three Phase - 1000 Ltr/min. - Cast IronTPE 50-710/2 A-F-A-BQQE-OW1
Single-stage, close-coupled, volute (centrifugal) pump unit with in-line suction and discharge ports of identical diameter. The pump is of the top-pull-out design, i.e. the power head (motor, pump head and impeller) can be removed for maintenance or service while the pump housing remains in the pipework. The pump is equipped with an unbalanced rubber bellows seal. The shaft seal is according to EN 12756. All pipework connection is via PN 16 DIN flanges (EN 1092-2 and ISO 7005-2). The pump is equipped with a fan-cooled asynchronous motor.
Suitable for: Commercial air conditioning
£17,181.60 RRP £11,168.04 £9,306.70
In stock
Free Standard Delivery
-
99113947
Grundfos - TPE 80-180/2 A-F-A-BQQE-JDB Inline Single Stage Circulator Pump - 500v - Three Phase - Cast IronTPE 80-180/2 A-F-A-BQQE-JWB
Single-stage, close-coupled, volute (centrifugal) pump unit with in-line suction and discharge ports of identical diameter. The pump is of the top-pull-out design, i.e. the power head (motor, pump head and impeller) can be removed for maintenance or service while the pump housing remains in the pipework. The pump is equipped with an unbalanced rubber bellows seal. The shaft seal is according to EN 12756. All pipework connection is via PN 16 DIN flanges (EN 1092-2 and ISO 7005-2). The pump is equipped with a fan-cooled, permanent-magnet synchronous motor. The pump is equipped with a fan-cooled asynchronous motor. The motor efficiency is classified as IE5 in accordance with IEC 60034-30-2.
Suitable for: Commercial air conditioning
£7,491.60 RRP £4,869.54 £4,057.95
2 week lead time
Free Standard Delivery
-
99114674
Grundfos - TPE 80-180/2 S-A-F-A-BQQE-JDB Inline Single Stage Circulator Pump - 500v - Three Phase - Cast IronTPE 80-180/2 S-A-F-A-BQQE-JWB
Single-stage, close-coupled, volute (centrifugal) pump unit with in-line suction and discharge ports of identical diameter. The pump is of the top-pull-out design, i.e. the power head (motor, pump head and impeller) can be removed for maintenance or service while the pump housing remains in the pipework. The pump is equipped with an unbalanced rubber bellows seal. The shaft seal is according to EN 12756. All pipework connection is via PN 16 DIN flanges (EN 1092-2 and ISO 7005-2). The pump is equipped with a fan-cooled, permanent-magnet synchronous motor. The pump is equipped with a fan-cooled asynchronous motor. The motor efficiency is classified as IE5 in accordance with IEC 60034-30-2. The motor includes a frequency converter and PI controller in the motor terminal box. This enables continuously variable control of the motor speed, which again enables adaptation of the performance to a given requirement. The pump is equipped with a differential pressure sensor.
Suitable for: Commercial heating, Commercial air conditioning, District heating, District cooling, Industrial heating, Industrial cooling, Desalination, Drinking water treatment, Water distribution, Irrigation, Community water supply
£8,820.00 RRP £5,733.00 £4,777.50
2 week lead time
Free Standard Delivery
-
96109123
Grundfos - TPD 100-70/4 A-F-A-BQQE-HX3 Inline Twin Head Circulator Pump - 420v - Three Phase - Cast IronTPD 100-70/4 A-F-A-BQQE-HW3
Single-stage, close-coupled, volute twin-head pump unit with in-line suction and discharge ports of identical diameter. The twin-head pump is designed with two parallel power-heads. The pump is of the top-pull-out design, i.e. the power head (motor, pump head and impeller) can be removed for maintenance or service while the pump housing remains in the pipework. Each power head is fitted with an unbalanced rubber bellows seal. The shaft seal is according to EN 12756. All pipework connection is via PN 16 DIN flanges (EN 1092-2 and ISO 7005-2). Each power head is fitted with a fan-cooled asynchronous motor of indentical size.
Suitable for: Commercial air conditioning
£9,381.60 RRP £6,098.04 £5,081.70
2-3 day delivery
Free Standard Delivery
-
96087585
Grundfos - TPD 65-410/2 A-F-A-BQQE-MX1 Inline Twin Head Circulator Pump - 690v - Three Phase - Cast IronTPD 65-410/2 A-F-A-BQQE-MW1
Single-stage, close-coupled, volute twin-head pump unit with in-line suction and discharge ports of identical diameter. The twin-head pump is designed with two parallel power-heads. The pump is of the top-pull-out design, i.e. the power head (motor, pump head and impeller) can be removed for maintenance or service while the pump housing remains in the pipework. Each power head is fitted with an unbalanced rubber bellows seal. The shaft seal is according to EN 12756. All pipework connection is via PN 16 DIN flanges (EN 1092-2 and ISO 7005-2). Each power head is fitted with a fan-cooled asynchronous motor of indentical size.
Suitable for: Commercial air conditioning
£10,948.80 RRP £7,116.72 £5,930.60
1 week lead time
Free Standard Delivery
-
99113659
Grundfos - TPE 150-110/4 A-F-A-BQQE-MDA Inline Single Stage Circulator Pump - 500v - Three Phase - Cast IronTPE 150-110/4 A-F-A-BQQE-MWA
Single-stage, close-coupled, volute (centrifugal) pump unit with in-line suction and discharge ports of identical diameter. The pump is of the top-pull-out design, i.e. the power head (motor, pump head and impeller) can be removed for maintenance or service while the pump housing remains in the pipework. The pump is equipped with an unbalanced rubber bellows seal. The shaft seal is according to EN 12756. All pipework connection is via PN 16 DIN flanges (EN 1092-2 and ISO 7005-2). The pump is equipped with a fan-cooled, permanent-magnet synchronous motor. The pump is equipped with a fan-cooled asynchronous motor. The motor efficiency is classified as IE5 in accordance with IEC 60034-30-2.
Suitable for: Commercial air conditioning
£16,605.60 RRP £10,793.64 £8,994.70
2 week lead time
Free Standard Delivery
-
99114733
Grundfos - TPE 150-110/4 S-A-F-A-BQQE-MDA Inline Single Stage Circulator Pump - 500v - Three Phase - Cast IronTPE 150-110/4 S-A-F-A-BQQE-MWA
Single-stage, close-coupled, volute (centrifugal) pump unit with in-line suction and discharge ports of identical diameter. The pump is of the top-pull-out design, i.e. the power head (motor, pump head and impeller) can be removed for maintenance or service while the pump housing remains in the pipework. The pump is equipped with an unbalanced rubber bellows seal. The shaft seal is according to EN 12756. All pipework connection is via PN 16 DIN flanges (EN 1092-2 and ISO 7005-2). The pump is equipped with a fan-cooled, permanent-magnet synchronous motor. The pump is equipped with a fan-cooled asynchronous motor. The motor efficiency is classified as IE5 in accordance with IEC 60034-30-2. The motor includes a frequency converter and PI controller in the motor terminal box. This enables continuously variable control of the motor speed, which again enables adaptation of the performance to a given requirement. The pump is equipped with a differential pressure sensor.
Suitable for: Commercial heating, Commercial air conditioning, District heating, District cooling, Industrial heating, Industrial cooling, Desalination, Drinking water treatment, Water distribution, Irrigation, Community water supply
£17,932.80 RRP £11,656.32 £9,713.60
2 week lead time
Free Standard Delivery
-
99114614
Grundfos - TPED 65-410/2 A-F-A-BQQE-MDB Inline Twin Head Circulator Pump - 500v - Three Phase - Cast IronTPED 65-410/2 A-F-A-BQQE-MWB
Single-stage, close-coupled, volute twin-head pump unit with in-line suction and discharge ports of identical diameter. The twin-head pump is designed with two parallel power-heads. The pump is of the top-pull-out design, i.e. the power head (motor, pump head and impeller) can be removed for maintenance or service while the pump housing remains in the pipework. Each power head is fitted with an unbalanced rubber bellows seal. The shaft seal is according to EN 12756. All pipework connection is via PN 16 DIN flanges (EN 1092-2 and ISO 7005-2). Each power head is fitted with a fan-cooled, permanent-magnet synchronous motor of identical size. Each power head is fitted with a fan-cooled asynchronous motor of indentical size. The motor efficiency is classified as IE5 in accordance with IEC 60034-30-2.
Suitable for: Commercial air conditioning
£22,809.60 RRP £14,826.24 £12,355.20
2 week lead time
Free Standard Delivery
-
99132834
Grundfos - TPED 65-410/2 S-A-F-A-BQQE-MDB Inline Twin Head Circulator Pump - 500v - Three Phase - Cast IronTPED 65-410/2 S-A-F-A-BQQE-MWB
Single-stage, close-coupled, volute twin-head pump unit with in-line suction and discharge ports of identical diameter. The twin-head pump is designed with two parallel power-heads. The pump is of the top-pull-out design, i.e. the power head (motor, pump head and impeller) can be removed for maintenance or service while the pump housing remains in the pipework. Each power head is fitted with an unbalanced rubber bellows seal. The shaft seal is according to EN 12756. All pipework connection is via PN 16 DIN flanges (EN 1092-2 and ISO 7005-2). Each power head is fitted with a fan-cooled, permanent-magnet synchronous motor of identical size. Each power head is fitted with a fan-cooled asynchronous motor of indentical size. The motor efficiency is classified as IE5 in accordance with IEC 60034-30-2. The motor includes a frequency converter and PI controller in the motor terminal box. This enables continuously variable control of the motor speed, which again enables adaptation of the performance to a given requirement. The pump is equipped with a differential pressure sensor.
Suitable for: Commercial heating, Commercial air conditioning, District heating, District cooling, Industrial heating, Industrial cooling, Desalination, Drinking water treatment, Water distribution, Irrigation, Community water supply
£24,138.00 RRP £15,689.70 £13,074.75
2 week lead time
Free Standard Delivery
-
96384316
Grundfos - TPD 100-70/4 A-F-A-BQQE-HX3 Inline Twin Head Circulator Pump - 230V - Single Phase - Cast IronTPD 100-70/4 A-F-A-BQQE-HW3
Single-stage, close-coupled, volute twin-head pump unit with in-line suction and discharge ports of identical diameter. The twin-head pump is designed with two parallel power-heads. The pump is of the top-pull-out design, i.e. the power head (motor, pump head and impeller) can be removed for maintenance or service while the pump housing remains in the pipework. Each power head is fitted with an unbalanced rubber bellows seal. The shaft seal is according to EN 12756. All pipework connection is via PN 16 DIN flanges (EN 1092-2 and ISO 7005-2). Each power head is fitted with a fan-cooled asynchronous motor of indentical size.
Suitable for: Commercial air conditioning
£9,765.60 RRP £6,347.64 £5,289.70
2-3 day delivery
Free Standard Delivery
-
LOW-E501240AA
Lowara - ecocirc XLplus 50-180 F Circulator Pump - Single Head - 960 Ltr/min- Night setback mode
- Easy to install and start up, no advanced programming necessary
- Clear display and easy setting with touch buttons
- For hot and cold media including tap hot water, geothermal and solar systems
- Communicate with Modbus RTU and BACnet systems
- Can be controlled from a laptop, tablet or smartphone via WiFi
The Lowara ecocirc XLplus 50-180 F Circulator Pump - Single Head is a Circulator Pump item. This product is manufactured by Lowara. It has an actual flow rate of 960 Ltr/min. The maximum head for this pump is 18m.
The Lowara ecocirc XL and XLplus are the wet rotor circulators that provide state-of-the-art technology in hydraulics, motors and intelligent controls.
The ecocirc XL and XLplus are everything you need in a large wet rotor circulator and nothing you don’t.
The purposefully engineered, easy-to-install ecocirc XL and XLplus are developed with simplicity and efficiency in mind.
£3,967.20 RRP £2,261.30 £1,884.42
In stock
Free Standard Delivery
-
LOW-E503580AA
Lowara - ecocirc XLplus D 80-120 F (PN6) Circulator Pump - Twin Head - 990 Ltr/min- Night setback mode
- Easy to install and start up, no advanced programming necessary
- Clear display and easy setting with touch buttons
- For hot and cold media including tap hot water, geothermal and solar systems
- Communicate with Modbus RTU and BACnet systems
- Can be controlled from a laptop, tablet or smartphone via WiFi
The Lowara ecocirc XLplus D 80-120 F (PN6) Circulator Pump - Twin Head is a Circulator Pump item. This product is manufactured by Lowara. It has an actual flow rate of 990 Ltr/min. The maximum head for this pump is 12m.
The Lowara ecocirc XL and XLplus are the wet rotor circulators that provide state-of-the-art technology in hydraulics, motors and intelligent controls.
The ecocirc XL and XLplus are everything you need in a large wet rotor circulator and nothing you don’t.
The purposefully engineered, easy-to-install ecocirc XL and XLplus are developed with simplicity and efficiency in mind.
£7,777.20 RRP £4,433.00 £3,694.17
In stock
Free Standard Delivery
Circulating Pumps
Circulating pumps move slurries, liquids, and gases through a closed system, keeping heating, cooling, and hot water circuits flowing as they should. They are most commonly used in domestic and commercial heating systems to maintain a steady supply of hot water, but they also play a key role in underfloor heating, radiator circuits, and chilled water applications.
By keeping water moving continuously, circulating pumps help balance temperatures, reduce energy waste, and ensure that taps, showers, and heating systems respond instantly when needed. Hot water circulating pumps are particularly useful in larger properties or commercial setups, where waiting for water to heat can lead to unnecessary water and energy use.
At Pumpify, our range includes circulating pumps suitable for everything from simple domestic setups to more complex commercial systems. Designed for easy installation, straightforward maintenance, and long-term performance, these pumps ensure your heating and hot water systems operate smoothly, reliably, and cost-effectively.