TP 125-100/6 A-F-A-BQQE-KW5

Single-stage, close-coupled, volute (centrifugal) pump unit with in-line suction and discharge ports of identical diameter. The pump is of the top-pull-out design, i.e. the power head (motor, pump head and impeller) can be removed for maintenance or service while the pump housing remains in the pipework. The pump is equipped with an unbalanced rubber bellows seal. The shaft seal is according to EN 12756. All pipework connection is via PN 16 DIN flanges (EN 1092-2 and ISO 7005-2). The pump is equipped with a fan-cooled asynchronous motor.

Suitable for: Commercial air conditioning

TP 100-30/4 AI-F-Z-BQQE-EW3

Single-stage, close-coupled, volute (centrifugal) pump unit with in-line suction and discharge ports of identical diameter. The pump is of the top-pull-out design, i.e. the power head (motor, pump head and impeller) can be removed for maintenance or service while the pump housing remains in the pipework. The pump is equipped with an unbalanced rubber bellows seal. The shaft seal is according to EN 12756. All pipework connection is via PN 6 DIN flanges (EN 1092-2 and ISO 7005-2). The pump is equipped with a fan-cooled asynchronous motor.

Suitable for: Commercial heating, Commercial air conditioning, District heating, District cooling, Industrial heating, Industrial cooling, Desalination, Drinking water treatment, Water distribution, Irrigation, Community water supply

Product name: Blanking flange

This is a Grundfos Spares/Replacement item used for servicing and replacing compatible pump equipment.

Grundfos (est. 1945) is a Danish pump manufacturer known for high-efficiency circulators, multistage boosters, borehole and wastewater pumps, plus packaged pressure systems. The range covers HVAC circulation, domestic hot water recirculation, pressure boosting, industrial water transfer and public water management, with strong focus on energy efficiency and intelligent controls.

The Lowara L 25-8/130N Stainless Steel Domestic Ecocirc Circulator is a Circulator Pump item. This product is manufactured by Lowara. Voltage for this item is 230V.

Buy the Lowara Stainless Steel Domestic Ecocirc from Pumpify and recieve free standard delivery.

Lowara Ecocirc N circulation pumps are developed for water circulation in domestic hot water systems.

Compact and easy to install, all models feature a unique “one turn knob to set up control modes and speed settings.

An interchangeable plug connection, automatic air-purge and a multicolor LED come as standard.

The full Ecocirc range reaches an EEI level ≤ 0.18.

The Lowara L 25-8/180N Stainless Steel Domestic Ecocirc Circulator is a Circulator Pump item. This product is manufactured by Lowara. Voltage for this item is 230V.

Buy the Lowara Stainless Steel Domestic Ecocirc from Pumpify and recieve free standard delivery.

Lowara Ecocirc N circulation pumps are developed for water circulation in domestic hot water systems.

Compact and easy to install, all models feature a unique “one turn knob to set up control modes and speed settings.

An interchangeable plug connection, automatic air-purge and a multicolor LED come as standard.

The full Ecocirc range reaches an EEI level ≤ 0.18.

The Lowara S 32-4/180N Stainless Steel Domestic Ecocirc Circulator is a Circulator Pump item. This product is manufactured by Lowara. Voltage for this item is 230V.

Buy the Lowara Stainless Steel Domestic Ecocirc from Pumpify and recieve free standard delivery.

Lowara Ecocirc N circulation pumps are developed for water circulation in domestic hot water systems.

Compact and easy to install, all models feature a unique “one turn knob to set up control modes and speed settings.

An interchangeable plug connection, automatic air-purge and a multicolor LED come as standard.

The full Ecocirc range reaches an EEI level ≤ 0.18.

The Lowara M 32-6/180N Stainless Steel Domestic Ecocirc Circulator is a Circulator Pump item. This product is manufactured by Lowara. Voltage for this item is 230V.

Buy the Lowara Stainless Steel Domestic Ecocirc from Pumpify and recieve free standard delivery.

Lowara Ecocirc N circulation pumps are developed for water circulation in domestic hot water systems.

Compact and easy to install, all models feature a unique “one turn knob to set up control modes and speed settings.

An interchangeable plug connection, automatic air-purge and a multicolor LED come as standard.

The full Ecocirc range reaches an EEI level ≤ 0.18.

The Lowara L 32-8/180N Stainless Steel Domestic Ecocirc Circulator is a Circulator Pump item. This product is manufactured by Lowara. Voltage for this item is 230V.

Buy the Lowara Stainless Steel Domestic Ecocirc from Pumpify and recieve free standard delivery.

Lowara Ecocirc N circulation pumps are developed for water circulation in domestic hot water systems.

Compact and easy to install, all models feature a unique “one turn knob to set up control modes and speed settings.

An interchangeable plug connection, automatic air-purge and a multicolor LED come as standard.

The full Ecocirc range reaches an EEI level ≤ 0.18.

The Lowara M 25-6/130N Stainless Steel Domestic Ecocirc Circulator is a Circulator Pump item. This product is manufactured by Lowara. Voltage for this item is 230V.

Buy the Lowara Stainless Steel Domestic Ecocirc from Pumpify and recieve free standard delivery.

Lowara Ecocirc N circulation pumps are developed for water circulation in domestic hot water systems.

Compact and easy to install, all models feature a unique “one turn knob to set up control modes and speed settings.

An interchangeable plug connection, automatic air-purge and a multicolor LED come as standard.

The full Ecocirc range reaches an EEI level ≤ 0.18.

TPED 32-250/2 A-F-A-BQQE-HWB

Single-stage, close-coupled, volute twin-head pump unit with in-line suction and discharge ports of identical diameter. The twin-head pump is designed with two parallel power-heads. The pump is of the top-pull-out design, i.e. the power head (motor, pump head and impeller) can be removed for maintenance or service while the pump housing remains in the pipework. Each power head is fitted with an unbalanced rubber bellows seal. The shaft seal is according to EN 12756. All pipework connection is via PN 16 DIN flanges (EN 1092-2 and ISO 7005-2). Each power head is fitted with a fan-cooled, permanent-magnet synchronous motor of identical size. Each power head is fitted with a fan-cooled asynchronous motor of indentical size. The motor efficiency is classified as IE5 in accordance with IEC 60034-30-2.

Suitable for: Commercial air conditioning

TPED 40-270/2 A-F-A-BQQE-HWB

Single-stage, close-coupled, volute twin-head pump unit with in-line suction and discharge ports of identical diameter. The twin-head pump is designed with two parallel power-heads. The pump is of the top-pull-out design, i.e. the power head (motor, pump head and impeller) can be removed for maintenance or service while the pump housing remains in the pipework. Each power head is fitted with an unbalanced rubber bellows seal. The shaft seal is according to EN 12756. All pipework connection is via PN 16 DIN flanges (EN 1092-2 and ISO 7005-2). Each power head is fitted with a fan-cooled, permanent-magnet synchronous motor of identical size. Each power head is fitted with a fan-cooled asynchronous motor of indentical size. The motor efficiency is classified as IE5 in accordance with IEC 60034-30-2.

Suitable for: Commercial air conditioning

TPED 100-70/4 S-A-F-A-BQQE-HWA

Single-stage, close-coupled, volute twin-head pump unit with in-line suction and discharge ports of identical diameter. The twin-head pump is designed with two parallel power-heads. The pump is of the top-pull-out design, i.e. the power head (motor, pump head and impeller) can be removed for maintenance or service while the pump housing remains in the pipework. Each power head is fitted with an unbalanced rubber bellows seal. The shaft seal is according to EN 12756. All pipework connection is via PN 16 DIN flanges (EN 1092-2 and ISO 7005-2). Each power head is fitted with a fan-cooled, permanent-magnet synchronous motor of identical size. Each power head is fitted with a fan-cooled asynchronous motor of indentical size. The motor efficiency is classified as IE5 in accordance with IEC 60034-30-2. The motor includes a frequency converter and PI controller in the motor terminal box. This enables continuously variable control of the motor speed, which again enables adaptation of the performance to a given requirement. The pump is equipped with a differential pressure sensor.

Suitable for: Commercial heating, Commercial air conditioning, District heating, District cooling, Industrial heating, Industrial cooling, Desalination, Drinking water treatment, Water distribution, Irrigation, Community water supply

TPED 100-130/4 S-A-F-A-BQQE-KWA

Single-stage, close-coupled, volute twin-head pump unit with in-line suction and discharge ports of identical diameter. The twin-head pump is designed with two parallel power-heads. The pump is of the top-pull-out design, i.e. the power head (motor, pump head and impeller) can be removed for maintenance or service while the pump housing remains in the pipework. Each power head is fitted with an unbalanced rubber bellows seal. The shaft seal is according to EN 12756. All pipework connection is via PN 16 DIN flanges (EN 1092-2 and ISO 7005-2). Each power head is fitted with a fan-cooled, permanent-magnet synchronous motor of identical size. Each power head is fitted with a fan-cooled asynchronous motor of indentical size. The motor efficiency is classified as IE5 in accordance with IEC 60034-30-2. The motor includes a frequency converter and PI controller in the motor terminal box. This enables continuously variable control of the motor speed, which again enables adaptation of the performance to a given requirement. The pump is equipped with a differential pressure sensor.

Suitable for: Commercial heating, Commercial air conditioning, District heating, District cooling, Industrial heating, Industrial cooling, Desalination, Drinking water treatment, Water distribution, Irrigation, Community water supply

TPED 32-230/2 S-A-F-A-BQQE-FWB

Single-stage, close-coupled, volute twin-head pump unit with in-line suction and discharge ports of identical diameter. The twin-head pump is designed with two parallel power-heads. The pump is of the top-pull-out design, i.e. the power head (motor, pump head and impeller) can be removed for maintenance or service while the pump housing remains in the pipework. Each power head is fitted with an unbalanced rubber bellows seal. The shaft seal is according to EN 12756. All pipework connection is via PN 6/10 DIN flanges (EN 1092-2 and ISO 7005-2). Each power head is fitted with a fan-cooled, permanent-magnet synchronous motor of identical size. Each power head is fitted with a fan-cooled asynchronous motor of indentical size. The motor efficiency is classified as IE5 in accordance with IEC 60034-30-2. The motor includes a frequency converter and PI controller in the motor terminal box. This enables continuously variable control of the motor speed, which again enables adaptation of the performance to a given requirement. The pump is equipped with a differential pressure sensor.

Suitable for: Commercial heating, Commercial air conditioning, District heating, District cooling, Industrial heating, Industrial cooling, Desalination, Drinking water treatment, Water distribution, Irrigation, Community water supply

TPED 100-90/4 S-A-F-A-BQQE-IWA

Single-stage, close-coupled, volute twin-head Pump with in-line suction and discharge ports of identical diameter. The twin-head Pump is engineered with two parallel power-heads. The Pump is of the top-pull-out design, i.e. the power head (motor, Pump head and impeller) can be removed for maintenance or service while the Pump housing remains in the pipework. Each power head is equipped with an unbalanced rubber bellows seal. The shaft seal is according to EN 12756. Pipework connection is via PN 16 DIN flanges (EN 1092-2 and ISO 7005-2). Each power head is equipped with a fan-cooled, permanent-magnet synchronous motor of identical size. Each power head is equipped with a fan-cooled asynchronous motor of indentical size. The motor performance is classified as IE5 in accordance with IEC 60034-30-2. The motor includes a frequency converter and PI controller in the motor terminal box. This enables continuously variable management of the motor speed, which again enables adaptation of the output to a given requirement. The Pump is equipped with a differential pressure sensor.

• Suitable for Commercial heating, Commercial air conditioning, District heating, District cooling, Industrial heating, Industrial cooling, Desalination, Drinking water treatment, Water distribution, Irrigation, Community water supply
• This product's housing material is Cast Iron
• The impeller is manufactured from Cast Iron
• Maximum operating pressure: 16 Bar.
• Temperature liquid range: -25 .. 120 °C.

TPED 40-270/2 A-F-A-BQQE-HWB

Single-stage, close-coupled, volute twin-head Pump with in-line suction and discharge ports of identical diameter. The twin-head Pump is engineered with two parallel power-heads. The Pump is of the top-pull-out design, i.e. the power head (motor, Pump head and impeller) can be removed for maintenance or service while the Pump housing remains in the pipework. Each power head is equipped with an unbalanced rubber bellows seal. The shaft seal is according to EN 12756. Pipework connection is via PN 16 DIN flanges (EN 1092-2 and ISO 7005-2). Each power head is equipped with a fan-cooled, permanent-magnet synchronous motor of identical size. Each power head is equipped with a fan-cooled asynchronous motor of indentical size. The motor performance is classified as IE5 in accordance with IEC 60034-30-2.

• Suitable for Commercial air conditioning,
• This product's housing material is Cast Iron
• The impeller is manufactured from Stainless Steel
• Maximum operating pressure: 16 Bar.
• Temperature liquid range: -25 .. 120 °C.