• My Account
  • My Wish List
  • Sign In
  • Compare Products
  • Create an Account
Toggle Nav
phone-icon
Search
Home
My Account
View More Pumps

Heating Circulators

(1635 products)

  1. Central Heating Pumps
  2. Circulating Pumps
  3. Condensate Pumps
  4. Domestic Hot Water Circulators
  5. Domestic Pressure Boosting
  6. Drainage Pumps
  7. End Suction Pumps
  8. Energy Efficient Products
  9. Expansion Vessels / Pressure Vessels
  10. Garden Pumps
  11. Grey Water Recycling
  12. Heating Circulators
  13. Home Booster Units
  14. Machine Tool Coolant Pumps
  15. Mains Booster Pumps
  16. Packaged Pumping Systems
Optionally, use our Pump Finder to find the Heating Circulators best suited to you:
Use our Pump Finder to find the right pump for you
Electrical supply:
AC Power:
Flow Rate:
More Options
View as Grid List

1635 Items

Page
per page
Filter Products
Set Descending Direction
  1. Wilo TOP-S 50/10 Replacement Head - 3 Phase

    2046673

    Wilo - TOP-S 50/10 REPLACEMENT Head - 400V - 3 Phase

    Please ensure Top-S replacement head part is appropriate for your pump model. Replacement heads unfortunately CANNOT be returned if they have been attempted to be fitted. If unsure please contact 0800 008 6405.

    Can be utilised for Hot-water heating systems of all sorts, industrial circulation systems, air-conditioning systems and closed cooling circuits.

    Maintenance-free glandless circulation pump with threaded or flange connection, pre-selectable speed stages for power adjustment.

    Item includes:

    Pump, Thermal insulation, Including seals for threaded connection, Washers for flange screws (for nominal connection diameters DN 40 - DN 65), and Installation manual and operating instructions.

    Advantages:

    Direction of rotation signal lamp for displaying the correct sense of rotation (only with 3~), Manual power adjustment with 3 speed stages, and Pump housing with cataphoretic coating (KTL) protects against corrosion due to condensation formation.

    Tech Info
    • Permitted temperature range -20 C to +130 C, for short periods (2 h) to +140 C (TOP-S 25/13, 80/15, 80/20: -20 C to +110 C)
    • Mains connection:
      • 1~230 V, 50 Hz (depending on type)
      • 3~230 V, 50 Hz (with optional switching plug)
      • 3~400 V, 50 Hz
    • Protection class IP X4D
    • Screwed connection or flange connection (depending on type) Rp 1 to DN 100
    • Max. operating pressure of standard version: 6/10 bar. or 6 bar. (special version: 10 bar.)
    Materials
    • Pump housing: Grey Cast Iron
    • Impeller: Plastic
    • Shaft: Stainless Steel
    • Bearing: Carbon, metal impregnated
    Construction:

    Glandless circulation pump with screwed connection or flange connection.

    Application

    Hot-water heating systems of all sorts, industrial circulation systems, air-conditioning systems and closed cooling circuits

    Equipment/function

    Operating modes

    • Speed-stage switching

    Manual functions

    • Setting the speed stages: 3 speed stages (2 speed stages for 1~ pumps with P2 350 W)

    Automatic functions

    • Internal protection against non-approved high winding temperatures (only for pumps for which P2 180 W)

    Signal and display functions

    • Thermal winding contact (WSK, potential-free NC contact) only for pumps for which P2 180 W) for full motor protection in all speed levels with optional tripping unit SK 602N/SK 622N
    • Direction of rotation control light (only for 3~pumps )
    • Display of selected speed stage

    Dual pump management (twin-head pump or 2 x single pumps)

    • Main/standby operation or parallel operation (for automatic fault-actuated switchover/time-dependent pump cycling, a corresponding switchgear must be provided on-site)

    Equipment

    • For flange-end pumps: Flange versions
      • Standard version for DN 40 to DN 65 pumps: PN 6/10 combination flange (PN 16 flange according to EN 1092-2) for PN 6 and PN 16 counter flanges,
      • Standard version for DN 80/DN 100 pumps: PN 6 flange (engineered for PN 16 according to EN 1092-2) for PN 6 counter flange
    • Cable inlet possible from both sides (only for 1~pumps and 3~pumps with P2180 W)
    • Thermal insulation as standard for heating applications
    Type key

    Example:

    TOPS 40/10

    TOP-S

    Standard pump (screw-end pump or flange-end pump)

    40/

    Nominal connection diameter

    10

    Nominal delivery head [m] at Q = 0 m3/ h

    wishlist Compare
    £1,863.60 RRP £1,211.34 £1,009.45
    Wilo
    In Stock In stock
    Delivery Icon Free Standard Delivery
  2. Wilo TOP-S 50/15 Replacement Head - 3 Phase

    2046674

    Wilo - TOP-S 50/15 REPLACEMENT Head - 400V - 3 Phase

    Please ensure Top-S replacement head part is appropriate for your pump model. Replacement heads unfortunately CANNOT be returned if they have been attempted to be fitted. If unsure please contact 0800 008 6405.

    Can be utilised for Hot-water heating systems of all sorts, industrial circulation systems, air-conditioning systems and closed cooling circuits.

    Maintenance-free glandless circulation pump with threaded or flange connection, pre-selectable speed stages for power adjustment.

    Item includes:

    Pump, Thermal insulation, Including seals for threaded connection, Washers for flange screws (for nominal connection diameters DN 40 - DN 65), and Installation manual and operating instructions.

    Advantages:

    Direction of rotation signal lamp for displaying the correct sense of rotation (only with 3~), Manual power adjustment with 3 speed stages, and Pump housing with cataphoretic coating (KTL) protects against corrosion due to condensation formation.

    Tech Info
    • Permitted temperature range -20 C to +130 C, for short periods (2 h) to +140 C (TOP-S 25/13, 80/15, 80/20: -20 C to +110 C)
    • Mains connection:
      • 1~230 V, 50 Hz (depending on type)
      • 3~230 V, 50 Hz (with optional switching plug)
      • 3~400 V, 50 Hz
    • Protection class IP X4D
    • Screwed connection or flange connection (depending on type) Rp 1 to DN 100
    • Max. operating pressure of standard version: 6/10 bar. or 6 bar. (special version: 10 bar.)
    Materials
    • Pump housing: Grey Cast Iron
    • Impeller: Plastic
    • Shaft: Stainless Steel
    • Bearing: Carbon, metal impregnated
    Construction:

    Glandless circulation pump with screwed connection or flange connection.

    Application

    Hot-water heating systems of all sorts, industrial circulation systems, air-conditioning systems and closed cooling circuits

    Equipment/function

    Operating modes

    • Speed-stage switching

    Manual functions

    • Setting the speed stages: 3 speed stages (2 speed stages for 1~ pumps with P2 350 W)

    Automatic functions

    • Internal protection against non-approved high winding temperatures (only for pumps for which P2 180 W)

    Signal and display functions

    • Thermal winding contact (WSK, potential-free NC contact) only for pumps for which P2 180 W) for full motor protection in all speed levels with optional tripping unit SK 602N/SK 622N
    • Direction of rotation control light (only for 3~pumps )
    • Display of selected speed stage

    Dual pump management (twin-head pump or 2 x single pumps)

    • Main/standby operation or parallel operation (for automatic fault-actuated switchover/time-dependent pump cycling, a corresponding switchgear must be provided on-site)

    Equipment

    • For flange-end pumps: Flange versions
      • Standard version for DN 40 to DN 65 pumps: PN 6/10 combination flange (PN 16 flange according to EN 1092-2) for PN 6 and PN 16 counter flanges,
      • Standard version for DN 80/DN 100 pumps: PN 6 flange (engineered for PN 16 according to EN 1092-2) for PN 6 counter flange
    • Cable inlet possible from both sides (only for 1~pumps and 3~pumps with P2180 W)
    • Thermal insulation as standard for heating applications
    Type key

    Example:

    TOPS 40/10

    TOP-S

    Standard pump (screw-end pump or flange-end pump)

    40/

    Nominal connection diameter

    10

    Nominal delivery head [m] at Q = 0 m3/ h

    wishlist Compare
    £2,589.60 RRP £1,683.24 £1,402.70
    Wilo
    In Stock In stock
    Delivery Icon Free Standard Delivery
  3. Wilo TOP-S 65/7 Replacement Head - 3 Phase

    2046675/29991433

    Wilo - TOP-S 65/7 REPLACEMENT Head - 400V - 3 Phase

    Please ensure Top-S replacement head part is appropriate for your pump model. Replacement heads unfortunately CANNOT be returned if they have been attempted to be fitted. If unsure please contact 0800 008 6405.

    Can be utilised for Hot-water heating systems of all sorts, industrial circulation systems, air-conditioning systems and closed cooling circuits.

    Maintenance-free glandless circulation pump with threaded or flange connection, pre-selectable speed stages for power adjustment.

    Item includes:

    Pump, Thermal insulation, Including seals for threaded connection, Washers for flange screws (for nominal connection diameters DN 40 - DN 65), and Installation manual and operating instructions.

    Advantages:

    Direction of rotation signal lamp for displaying the correct sense of rotation (only with 3~), Manual power adjustment with 3 speed stages, and Pump housing with cataphoretic coating (KTL) protects against corrosion due to condensation formation.

    Tech Info
    • Permitted temperature range -20 C to +130 C, for short periods (2 h) to +140 C (TOP-S 25/13, 80/15, 80/20: -20 C to +110 C)
    • Mains connection:
      • 1~230 V, 50 Hz (depending on type)
      • 3~230 V, 50 Hz (with optional switching plug)
      • 3~400 V, 50 Hz
    • Protection class IP X4D
    • Screwed connection or flange connection (depending on type) Rp 1 to DN 100
    • Max. operating pressure of standard version: 6/10 bar. or 6 bar. (special version: 10 bar.)
    Materials
    • Pump housing: Grey Cast Iron
    • Impeller: Plastic
    • Shaft: Stainless Steel
    • Bearing: Carbon, metal impregnated
    Construction:

    Glandless circulation pump with screwed connection or flange connection.

    Application

    Hot-water heating systems of all sorts, industrial circulation systems, air-conditioning systems and closed cooling circuits

    Equipment/function

    Operating modes

    • Speed-stage switching

    Manual functions

    • Setting the speed stages: 3 speed stages (2 speed stages for 1~ pumps with P2 350 W)

    Automatic functions

    • Internal protection against non-approved high winding temperatures (only for pumps for which P2 180 W)

    Signal and display functions

    • Thermal winding contact (WSK, potential-free NC contact) only for pumps for which P2 180 W) for full motor protection in all speed levels with optional tripping unit SK 602N/SK 622N
    • Direction of rotation control light (only for 3~pumps )
    • Display of selected speed stage

    Dual pump management (twin-head pump or 2 x single pumps)

    • Main/standby operation or parallel operation (for automatic fault-actuated switchover/time-dependent pump cycling, a corresponding switchgear must be provided on-site)

    Equipment

    • For flange-end pumps: Flange versions
      • Standard version for DN 40 to DN 65 pumps: PN 6/10 combination flange (PN 16 flange according to EN 1092-2) for PN 6 and PN 16 counter flanges,
      • Standard version for DN 80/DN 100 pumps: PN 6 flange (engineered for PN 16 according to EN 1092-2) for PN 6 counter flange
    • Cable inlet possible from both sides (only for 1~pumps and 3~pumps with P2180 W)
    • Thermal insulation as standard for heating applications
    Type key

    Example:

    TOPS 40/10

    TOP-S

    Standard pump (screw-end pump or flange-end pump)

    40/

    Nominal connection diameter

    10

    Nominal delivery head [m] at Q = 0 m3/ h

    wishlist Compare
    £1,807.20 RRP £1,174.68 £978.90
    Wilo
    In Stock In stock
    Delivery Icon Free Standard Delivery
  4. Wilo TOP-S 65/10 Replacement Head - 3 Phase

    2046676 / 29991437

    Wilo - TOP-S 65/10 REPLACEMENT Head - 400V - 3 Phase

    Please ensure Top-S replacement head part is appropriate for your pump model. Replacement heads unfortunately CANNOT be returned if they have been attempted to be fitted. If unsure please contact 0800 008 6405.

    Can be utilised for Hot-water heating systems of all sorts, industrial circulation systems, air-conditioning systems and closed cooling circuits.

    Maintenance-free glandless circulation pump with threaded or flange connection, pre-selectable speed stages for power adjustment.

    Item includes:

    Pump, Thermal insulation, Including seals for threaded connection, Washers for flange screws (for nominal connection diameters DN 40 - DN 65), and Installation manual and operating instructions.

    Advantages:

    Direction of rotation signal lamp for displaying the correct sense of rotation (only with 3~), Manual power adjustment with 3 speed stages, and Pump housing with cataphoretic coating (KTL) protects against corrosion due to condensation formation.

    Tech Info
    • Permitted temperature range -20 C to +130 C, for short periods (2 h) to +140 C (TOP-S 25/13, 80/15, 80/20: -20 C to +110 C)
    • Mains connection:
      • 1~230 V, 50 Hz (depending on type)
      • 3~230 V, 50 Hz (with optional switching plug)
      • 3~400 V, 50 Hz
    • Protection class IP X4D
    • Screwed connection or flange connection (depending on type) Rp 1 to DN 100
    • Max. operating pressure of standard version: 6/10 bar. or 6 bar. (special version: 10 bar.)
    Materials
    • Pump housing: Grey Cast Iron
    • Impeller: Plastic
    • Shaft: Stainless Steel
    • Bearing: Carbon, metal impregnated
    Construction:

    Glandless circulation pump with screwed connection or flange connection.

    Application

    Hot-water heating systems of all sorts, industrial circulation systems, air-conditioning systems and closed cooling circuits

    Equipment/function

    Operating modes

    • Speed-stage switching

    Manual functions

    • Setting the speed stages: 3 speed stages (2 speed stages for 1~ pumps with P2 350 W)

    Automatic functions

    • Internal protection against non-approved high winding temperatures (only for pumps for which P2 180 W)

    Signal and display functions

    • Thermal winding contact (WSK, potential-free NC contact) only for pumps for which P2 180 W) for full motor protection in all speed levels with optional tripping unit SK 602N/SK 622N
    • Direction of rotation control light (only for 3~pumps )
    • Display of selected speed stage

    Dual pump management (twin-head pump or 2 x single pumps)

    • Main/standby operation or parallel operation (for automatic fault-actuated switchover/time-dependent pump cycling, a corresponding switchgear must be provided on-site)

    Equipment

    • For flange-end pumps: Flange versions
      • Standard version for DN 40 to DN 65 pumps: PN 6/10 combination flange (PN 16 flange according to EN 1092-2) for PN 6 and PN 16 counter flanges,
      • Standard version for DN 80/DN 100 pumps: PN 6 flange (engineered for PN 16 according to EN 1092-2) for PN 6 counter flange
    • Cable inlet possible from both sides (only for 1~pumps and 3~pumps with P2180 W)
    • Thermal insulation as standard for heating applications
    Type key

    Example:

    TOPS 40/10

    TOP-S

    Standard pump (screw-end pump or flange-end pump)

    40/

    Nominal connection diameter

    10

    Nominal delivery head [m] at Q = 0 m3/ h

    wishlist Compare
    £2,230.80 RRP £1,450.02 £1,208.35
    Wilo
    In Stock In stock
    Delivery Icon Free Standard Delivery
  5. Wilo TOP-S 80/10 Replacement Head - 3 Phase

    WILO-29991442

    Wilo - TOP-S 80/10 REPLACEMENT Head - 3 Phase

    Please ensure Top-S replacement head part is appropriate for your pump model. Replacement heads unfortunately CANNOT be returned if they have been attempted to be fitted. If unsure please contact 0800 008 6405.

    Can be utilised for Hot-water heating systems of all sorts, industrial circulation systems, air-conditioning systems and closed cooling circuits.

    Maintenance-free glandless circulation pump with threaded or flange connection, pre-selectable speed stages for power adjustment.

    Item includes:

    Pump, Thermal insulation, Including seals for threaded connection, Washers for flange screws (for nominal connection diameters DN 40 - DN 65), and Installation manual and operating instructions.

    Advantages:

    Direction of rotation signal lamp for displaying the correct sense of rotation (only with 3~), Manual power adjustment with 3 speed stages, and Pump housing with cataphoretic coating (KTL) protects against corrosion due to condensation formation.

    Tech Info
    • Permitted temperature range -20 C to +130 C, for short periods (2 h) to +140 C (TOP-S 25/13, 80/15, 80/20: -20 C to +110 C)
    • Mains connection:
      • 1~230 V, 50 Hz (depending on type)
      • 3~230 V, 50 Hz (with optional switching plug)
      • 3~400 V, 50 Hz
    • Protection class IP X4D
    • Screwed connection or flange connection (depending on type) Rp 1 to DN 100
    • Max. operating pressure of standard version: 6/10 bar. or 6 bar. (special version: 10 bar.)
    Materials
    • Pump housing: Grey Cast Iron
    • Impeller: Plastic
    • Shaft: Stainless Steel
    • Bearing: Carbon, metal impregnated
    Construction:

    Glandless circulation pump with screwed connection or flange connection.

    Application

    Hot-water heating systems of all sorts, industrial circulation systems, air-conditioning systems and closed cooling circuits

    Equipment/function

    Operating modes

    • Speed-stage switching

    Manual functions

    • Setting the speed stages: 3 speed stages (2 speed stages for 1~ pumps with P2 350 W)

    Automatic functions

    • Internal protection against non-approved high winding temperatures (only for pumps for which P2 180 W)

    Signal and display functions

    • Thermal winding contact (WSK, potential-free NC contact) only for pumps for which P2 180 W) for full motor protection in all speed levels with optional tripping unit SK 602N/SK 622N
    • Direction of rotation control light (only for 3~pumps )
    • Display of selected speed stage

    Dual pump management (twin-head pump or 2 x single pumps)

    • Main/standby operation or parallel operation (for automatic fault-actuated switchover/time-dependent pump cycling, a corresponding switchgear must be provided on-site)

    Equipment

    • For flange-end pumps: Flange versions
      • Standard version for DN 40 to DN 65 pumps: PN 6/10 combination flange (PN 16 flange according to EN 1092-2) for PN 6 and PN 16 counter flanges,
      • Standard version for DN 80/DN 100 pumps: PN 6 flange (engineered for PN 16 according to EN 1092-2) for PN 6 counter flange
    • Cable inlet possible from both sides (only for 1~pumps and 3~pumps with P2180 W)
    • Thermal insulation as standard for heating applications
    Type key

    Example:

    TOPS 40/10

    TOP-S

    Standard pump (screw-end pump or flange-end pump)

    40/

    Nominal connection diameter

    10

    Nominal delivery head [m] at Q = 0 m3/ h

    wishlist Compare
    £2,943.60 RRP £1,913.34 £1,594.45
    Wilo
    In Stock In stock
    Delivery Icon Free Standard Delivery
  6. Wilo TOP-S 50/10 Replacement Head - Single Phase

    2046692

    Wilo - TOP-S 50/10 REPLACEMENT Head - 230V - Single Phase

    Please ensure Top-S replacement head part is appropriate for your pump model. Replacement heads unfortunately CANNOT be returned if they have been attempted to be fitted. If unsure please contact 0800 008 6405.

    Can be utilised for Hot-water heating systems of all sorts, industrial circulation systems, air-conditioning systems and closed cooling circuits.

    Maintenance-free glandless circulation pump with threaded or flange connection, pre-selectable speed stages for power adjustment.

    Item includes:

    Pump, Thermal insulation, Including seals for threaded connection, Washers for flange screws (for nominal connection diameters DN 40 - DN 65), and Installation manual and operating instructions.

    Advantages:

    Direction of rotation signal lamp for displaying the correct sense of rotation (only with 3~), Manual power adjustment with 3 speed stages, and Pump housing with cataphoretic coating (KTL) protects against corrosion due to condensation formation.

    Tech Info
    • Permitted temperature range -20 C to +130 C, for short periods (2 h) to +140 C (TOP-S 25/13, 80/15, 80/20: -20 C to +110 C)
    • Mains connection:
      • 1~230 V, 50 Hz (depending on type)
      • 3~230 V, 50 Hz (with optional switching plug)
      • 3~400 V, 50 Hz
    • Protection class IP X4D
    • Screwed connection or flange connection (depending on type) Rp 1 to DN 100
    • Max. operating pressure of standard version: 6/10 bar. or 6 bar. (special version: 10 bar.)
    Materials
    • Pump housing: Grey Cast Iron
    • Impeller: Plastic
    • Shaft: Stainless Steel
    • Bearing: Carbon, metal impregnated
    Construction:

    Glandless circulation pump with screwed connection or flange connection.

    Application

    Hot-water heating systems of all sorts, industrial circulation systems, air-conditioning systems and closed cooling circuits

    Equipment/function

    Operating modes

    • Speed-stage switching

    Manual functions

    • Setting the speed stages: 3 speed stages (2 speed stages for 1~ pumps with P2 350 W)

    Automatic functions

    • Internal protection against non-approved high winding temperatures (only for pumps for which P2 180 W)

    Signal and display functions

    • Thermal winding contact (WSK, potential-free NC contact) only for pumps for which P2 180 W) for full motor protection in all speed levels with optional tripping unit SK 602N/SK 622N
    • Direction of rotation control light (only for 3~pumps )
    • Display of selected speed stage

    Dual pump management (twin-head pump or 2 x single pumps)

    • Main/standby operation or parallel operation (for automatic fault-actuated switchover/time-dependent pump cycling, a corresponding switchgear must be provided on-site)

    Equipment

    • For flange-end pumps: Flange versions
      • Standard version for DN 40 to DN 65 pumps: PN 6/10 combination flange (PN 16 flange according to EN 1092-2) for PN 6 and PN 16 counter flanges,
      • Standard version for DN 80/DN 100 pumps: PN 6 flange (engineered for PN 16 according to EN 1092-2) for PN 6 counter flange
    • Cable inlet possible from both sides (only for 1~pumps and 3~pumps with P2180 W)
    • Thermal insulation as standard for heating applications
    Type key

    Example:

    TOPS 40/10

    TOP-S

    Standard pump (screw-end pump or flange-end pump)

    40/

    Nominal connection diameter

    10

    Nominal delivery head [m] at Q = 0 m3/ h

    wishlist Compare
    £1,863.60 RRP £1,211.34 £1,009.45
    Wilo
    In Stock In stock
    Delivery Icon Free Standard Delivery
  7. Wilo TOP-S 65/10 Replacement Head - Single Phase

    2046694 / 29991435

    Wilo - TOP-S 65/10 REPLACEMENT Head - 230V - Single Phase

    Please ensure Top-S replacement head part is appropriate for your pump model. Replacement heads unfortunately CANNOT be returned if they have been attempted to be fitted. If unsure please contact 0800 008 6405.

    Can be utilised for Hot-water heating systems of all sorts, industrial circulation systems, air-conditioning systems and closed cooling circuits.

    Maintenance-free glandless circulation pump with threaded or flange connection, pre-selectable speed stages for power adjustment.

    Item includes:

    Pump, Thermal insulation, Including seals for threaded connection, Washers for flange screws (for nominal connection diameters DN 40 - DN 65), and Installation manual and operating instructions.

    Advantages:

    Direction of rotation signal lamp for displaying the correct sense of rotation (only with 3~), Manual power adjustment with 3 speed stages, and Pump housing with cataphoretic coating (KTL) protects against corrosion due to condensation formation.

    Tech Info
    • Permitted temperature range -20 C to +130 C, for short periods (2 h) to +140 C (TOP-S 25/13, 80/15, 80/20: -20 C to +110 C)
    • Mains connection:
      • 1~230 V, 50 Hz (depending on type)
      • 3~230 V, 50 Hz (with optional switching plug)
      • 3~400 V, 50 Hz
    • Protection class IP X4D
    • Screwed connection or flange connection (depending on type) Rp 1 to DN 100
    • Max. operating pressure of standard version: 6/10 bar. or 6 bar. (special version: 10 bar.)
    Materials
    • Pump housing: Grey Cast Iron
    • Impeller: Plastic
    • Shaft: Stainless Steel
    • Bearing: Carbon, metal impregnated
    Construction:

    Glandless circulation pump with screwed connection or flange connection.

    Application

    Hot-water heating systems of all sorts, industrial circulation systems, air-conditioning systems and closed cooling circuits

    Equipment/function

    Operating modes

    • Speed-stage switching

    Manual functions

    • Setting the speed stages: 3 speed stages (2 speed stages for 1~ pumps with P2 350 W)

    Automatic functions

    • Internal protection against non-approved high winding temperatures (only for pumps for which P2 180 W)

    Signal and display functions

    • Thermal winding contact (WSK, potential-free NC contact) only for pumps for which P2 180 W) for full motor protection in all speed levels with optional tripping unit SK 602N/SK 622N
    • Direction of rotation control light (only for 3~pumps )
    • Display of selected speed stage

    Dual pump management (twin-head pump or 2 x single pumps)

    • Main/standby operation or parallel operation (for automatic fault-actuated switchover/time-dependent pump cycling, a corresponding switchgear must be provided on-site)

    Equipment

    • For flange-end pumps: Flange versions
      • Standard version for DN 40 to DN 65 pumps: PN 6/10 combination flange (PN 16 flange according to EN 1092-2) for PN 6 and PN 16 counter flanges,
      • Standard version for DN 80/DN 100 pumps: PN 6 flange (engineered for PN 16 according to EN 1092-2) for PN 6 counter flange
    • Cable inlet possible from both sides (only for 1~pumps and 3~pumps with P2180 W)
    • Thermal insulation as standard for heating applications
    Type key

    Example:

    TOPS 40/10

    TOP-S

    Standard pump (screw-end pump or flange-end pump)

    40/

    Nominal connection diameter

    10

    Nominal delivery head [m] at Q = 0 m3/ h

    wishlist Compare
    £2,007.60 RRP £1,304.94 £1,087.45
    Wilo
    In Stock In stock
    Delivery Icon Free Standard Delivery
  8. Wilo TOP-S 25/7 Replacement Head - 3 Phase

    2048321/29991402

    Wilo - TOP-S 25/7 REPLACEMENT Head - 400V - 3 Phase

    Please ensure Top-S replacement head part is appropriate for your pump model. Replacement heads unfortunately CANNOT be returned if they have been attempted to be fitted. If unsure please contact 0800 008 6405.

    Can be utilised for Hot-water heating systems of all sorts, industrial circulation systems, air-conditioning systems and closed cooling circuits.

    Maintenance-free glandless circulation pump with threaded or flange connection, pre-selectable speed stages for power adjustment.

    Item includes:

    Pump, Thermal insulation, Including seals for threaded connection, Washers for flange screws (for nominal connection diameters DN 40 - DN 65), and Installation manual and operating instructions.

    Advantages:

    Direction of rotation signal lamp for displaying the correct sense of rotation (only with 3~), Manual power adjustment with 3 speed stages, and Pump housing with cataphoretic coating (KTL) protects against corrosion due to condensation formation.

    Tech Info
    • Permitted temperature range -20 C to +130 C, for short periods (2 h) to +140 C (TOP-S 25/13, 80/15, 80/20: -20 C to +110 C)
    • Mains connection:
      • 1~230 V, 50 Hz (depending on type)
      • 3~230 V, 50 Hz (with optional switching plug)
      • 3~400 V, 50 Hz
    • Protection class IP X4D
    • Screwed connection or flange connection (depending on type) Rp 1 to DN 100
    • Max. operating pressure of standard version: 6/10 bar. or 6 bar. (special version: 10 bar.)
    Materials
    • Pump housing: Grey Cast Iron
    • Impeller: Plastic
    • Shaft: Stainless Steel
    • Bearing: Carbon, metal impregnated
    Construction:

    Glandless circulation pump with screwed connection or flange connection.

    Application

    Hot-water heating systems of all sorts, industrial circulation systems, air-conditioning systems and closed cooling circuits

    Equipment/function

    Operating modes

    • Speed-stage switching

    Manual functions

    • Setting the speed stages: 3 speed stages (2 speed stages for 1~ pumps with P2 350 W)

    Automatic functions

    • Internal protection against non-approved high winding temperatures (only for pumps for which P2 180 W)

    Signal and display functions

    • Thermal winding contact (WSK, potential-free NC contact) only for pumps for which P2 180 W) for full motor protection in all speed levels with optional tripping unit SK 602N/SK 622N
    • Direction of rotation control light (only for 3~pumps )
    • Display of selected speed stage

    Dual pump management (twin-head pump or 2 x single pumps)

    • Main/standby operation or parallel operation (for automatic fault-actuated switchover/time-dependent pump cycling, a corresponding switchgear must be provided on-site)

    Equipment

    • For flange-end pumps: Flange versions
      • Standard version for DN 40 to DN 65 pumps: PN 6/10 combination flange (PN 16 flange according to EN 1092-2) for PN 6 and PN 16 counter flanges,
      • Standard version for DN 80/DN 100 pumps: PN 6 flange (engineered for PN 16 according to EN 1092-2) for PN 6 counter flange
    • Cable inlet possible from both sides (only for 1~pumps and 3~pumps with P2180 W)
    • Thermal insulation as standard for heating applications
    Type key

    Example:

    TOPS 40/10

    TOP-S

    Standard pump (screw-end pump or flange-end pump)

    40/

    Nominal connection diameter

    10

    Nominal delivery head [m] at Q = 0 m3/ h

    wishlist Compare
    £650.40 RRP £422.76 £352.30
    Wilo
    In Stock In stock
    Delivery Icon Free Standard Delivery
  9. Wilo TOP-S 25/7 Replacement Head - Single Phase

    2048334/29991401

    Wilo - TOP-S 25/7 REPLACEMENT Head - 230V - Single Phase

    Please ensure Top-S replacement head part is appropriate for your pump model. Replacement heads unfortunately CANNOT be returned if they have been attempted to be fitted. If unsure please contact 0800 008 6405.

    Can be utilised for Hot-water heating systems of all sorts, industrial circulation systems, air-conditioning systems and closed cooling circuits.

    Maintenance-free glandless circulation pump with threaded or flange connection, pre-selectable speed stages for power adjustment.

    Item includes:

    Pump, Thermal insulation, Including seals for threaded connection, Washers for flange screws (for nominal connection diameters DN 40 - DN 65), and Installation manual and operating instructions.

    Advantages:

    Direction of rotation signal lamp for displaying the correct sense of rotation (only with 3~), Manual power adjustment with 3 speed stages, and Pump housing with cataphoretic coating (KTL) protects against corrosion due to condensation formation.

    Tech Info
    • Permitted temperature range -20 C to +130 C, for short periods (2 h) to +140 C (TOP-S 25/13, 80/15, 80/20: -20 C to +110 C)
    • Mains connection:
      • 1~230 V, 50 Hz (depending on type)
      • 3~230 V, 50 Hz (with optional switching plug)
      • 3~400 V, 50 Hz
    • Protection class IP X4D
    • Screwed connection or flange connection (depending on type) Rp 1 to DN 100
    • Max. operating pressure of standard version: 6/10 bar. or 6 bar. (special version: 10 bar.)
    Materials
    • Pump housing: Grey Cast Iron
    • Impeller: Plastic
    • Shaft: Stainless Steel
    • Bearing: Carbon, metal impregnated
    Construction:

    Glandless circulation pump with screwed connection or flange connection.

    Application

    Hot-water heating systems of all sorts, industrial circulation systems, air-conditioning systems and closed cooling circuits

    Equipment/function

    Operating modes

    • Speed-stage switching

    Manual functions

    • Setting the speed stages: 3 speed stages (2 speed stages for 1~ pumps with P2 350 W)

    Automatic functions

    • Internal protection against non-approved high winding temperatures (only for pumps for which P2 180 W)

    Signal and display functions

    • Thermal winding contact (WSK, potential-free NC contact) only for pumps for which P2 180 W) for full motor protection in all speed levels with optional tripping unit SK 602N/SK 622N
    • Direction of rotation control light (only for 3~pumps )
    • Display of selected speed stage

    Dual pump management (twin-head pump or 2 x single pumps)

    • Main/standby operation or parallel operation (for automatic fault-actuated switchover/time-dependent pump cycling, a corresponding switchgear must be provided on-site)

    Equipment

    • For flange-end pumps: Flange versions
      • Standard version for DN 40 to DN 65 pumps: PN 6/10 combination flange (PN 16 flange according to EN 1092-2) for PN 6 and PN 16 counter flanges,
      • Standard version for DN 80/DN 100 pumps: PN 6 flange (engineered for PN 16 according to EN 1092-2) for PN 6 counter flange
    • Cable inlet possible from both sides (only for 1~pumps and 3~pumps with P2180 W)
    • Thermal insulation as standard for heating applications
    Type key

    Example:

    TOPS 40/10

    TOP-S

    Standard pump (screw-end pump or flange-end pump)

    40/

    Nominal connection diameter

    10

    Nominal delivery head [m] at Q = 0 m3/ h

    wishlist Compare
    £585.60 RRP £380.64 £317.20
    Wilo
    In Stock In stock
    Delivery Icon Free Standard Delivery
  10. Wilo TOP-S 30/7 Replacement Head - Single Phase

    2048336/29991408

    Wilo - TOP-S 30/7 REPLACEMENT Head - 230V - Single Phase

    Please ensure Top-S replacement head part is appropriate for your pump model. Replacement heads unfortunately CANNOT be returned if they have been attempted to be fitted. If unsure please contact 0800 008 6405.

    Can be utilised for Hot-water heating systems of all sorts, industrial circulation systems, air-conditioning systems and closed cooling circuits.

    Maintenance-free glandless circulation pump with threaded or flange connection, pre-selectable speed stages for power adjustment.

    Item includes:

    Pump, Thermal insulation, Including seals for threaded connection, Washers for flange screws (for nominal connection diameters DN 40 - DN 65), and Installation manual and operating instructions.

    Advantages:

    Direction of rotation signal lamp for displaying the correct sense of rotation (only with 3~), Manual power adjustment with 3 speed stages, and Pump housing with cataphoretic coating (KTL) protects against corrosion due to condensation formation.

    Tech Info
    • Permitted temperature range -20 C to +130 C, for short periods (2 h) to +140 C (TOP-S 25/13, 80/15, 80/20: -20 C to +110 C)
    • Mains connection:
      • 1~230 V, 50 Hz (depending on type)
      • 3~230 V, 50 Hz (with optional switching plug)
      • 3~400 V, 50 Hz
    • Protection class IP X4D
    • Screwed connection or flange connection (depending on type) Rp 1 to DN 100
    • Max. operating pressure of standard version: 6/10 bar. or 6 bar. (special version: 10 bar.)
    Materials
    • Pump housing: Grey Cast Iron
    • Impeller: Plastic
    • Shaft: Stainless Steel
    • Bearing: Carbon, metal impregnated
    Construction:

    Glandless circulation pump with screwed connection or flange connection.

    Application

    Hot-water heating systems of all sorts, industrial circulation systems, air-conditioning systems and closed cooling circuits

    Equipment/function

    Operating modes

    • Speed-stage switching

    Manual functions

    • Setting the speed stages: 3 speed stages (2 speed stages for 1~ pumps with P2 350 W)

    Automatic functions

    • Internal protection against non-approved high winding temperatures (only for pumps for which P2 180 W)

    Signal and display functions

    • Thermal winding contact (WSK, potential-free NC contact) only for pumps for which P2 180 W) for full motor protection in all speed levels with optional tripping unit SK 602N/SK 622N
    • Direction of rotation control light (only for 3~pumps )
    • Display of selected speed stage

    Dual pump management (twin-head pump or 2 x single pumps)

    • Main/standby operation or parallel operation (for automatic fault-actuated switchover/time-dependent pump cycling, a corresponding switchgear must be provided on-site)

    Equipment

    • For flange-end pumps: Flange versions
      • Standard version for DN 40 to DN 65 pumps: PN 6/10 combination flange (PN 16 flange according to EN 1092-2) for PN 6 and PN 16 counter flanges,
      • Standard version for DN 80/DN 100 pumps: PN 6 flange (engineered for PN 16 according to EN 1092-2) for PN 6 counter flange
    • Cable inlet possible from both sides (only for 1~pumps and 3~pumps with P2180 W)
    • Thermal insulation as standard for heating applications
    Type key

    Example:

    TOPS 40/10

    TOP-S

    Standard pump (screw-end pump or flange-end pump)

    40/

    Nominal connection diameter

    10

    Nominal delivery head [m] at Q = 0 m3/ h

    wishlist Compare
    £648.00 RRP £421.20 £351.00
    Wilo
    In Stock In stock
    Delivery Icon Free Standard Delivery
  11. Wilo TOP-S 40/10 Replacement Head - Single Phase

    2080017

    Wilo - TOP-S 40/10 REPLACEMENT Head - 230V - Single Phase

    Please ensure Top-S replacement head part is appropriate for your pump model. Replacement heads unfortunately CANNOT be returned if they have been attempted to be fitted. If unsure please contact 0800 008 6405.

    Can be utilised for Hot-water heating systems of all sorts, industrial circulation systems, air-conditioning systems and closed cooling circuits.

    Maintenance-free glandless circulation pump with threaded or flange connection, pre-selectable speed stages for power adjustment.

    Item includes:

    Pump, Thermal insulation, Including seals for threaded connection, Washers for flange screws (for nominal connection diameters DN 40 - DN 65), and Installation manual and operating instructions.

    Advantages:

    Direction of rotation signal lamp for displaying the correct sense of rotation (only with 3~), Manual power adjustment with 3 speed stages, and Pump housing with cataphoretic coating (KTL) protects against corrosion due to condensation formation.

    Tech Info
    • Permitted temperature range -20 C to +130 C, for short periods (2 h) to +140 C (TOP-S 25/13, 80/15, 80/20: -20 C to +110 C)
    • Mains connection:
      • 1~230 V, 50 Hz (depending on type)
      • 3~230 V, 50 Hz (with optional switching plug)
      • 3~400 V, 50 Hz
    • Protection class IP X4D
    • Screwed connection or flange connection (depending on type) Rp 1 to DN 100
    • Max. operating pressure of standard version: 6/10 bar. or 6 bar. (special version: 10 bar.)
    Materials
    • Pump housing: Grey Cast Iron
    • Impeller: Plastic
    • Shaft: Stainless Steel
    • Bearing: Carbon, metal impregnated
    Construction:

    Glandless circulation pump with screwed connection or flange connection.

    Application

    Hot-water heating systems of all sorts, industrial circulation systems, air-conditioning systems and closed cooling circuits

    Equipment/function

    Operating modes

    • Speed-stage switching

    Manual functions

    • Setting the speed stages: 3 speed stages (2 speed stages for 1~ pumps with P2 350 W)

    Automatic functions

    • Internal protection against non-approved high winding temperatures (only for pumps for which P2 180 W)

    Signal and display functions

    • Thermal winding contact (WSK, potential-free NC contact) only for pumps for which P2 180 W) for full motor protection in all speed levels with optional tripping unit SK 602N/SK 622N
    • Direction of rotation control light (only for 3~pumps )
    • Display of selected speed stage

    Dual pump management (twin-head pump or 2 x single pumps)

    • Main/standby operation or parallel operation (for automatic fault-actuated switchover/time-dependent pump cycling, a corresponding switchgear must be provided on-site)

    Equipment

    • For flange-end pumps: Flange versions
      • Standard version for DN 40 to DN 65 pumps: PN 6/10 combination flange (PN 16 flange according to EN 1092-2) for PN 6 and PN 16 counter flanges,
      • Standard version for DN 80/DN 100 pumps: PN 6 flange (engineered for PN 16 according to EN 1092-2) for PN 6 counter flange
    • Cable inlet possible from both sides (only for 1~pumps and 3~pumps with P2180 W)
    • Thermal insulation as standard for heating applications
    Type key

    Example:

    TOPS 40/10

    TOP-S

    Standard pump (screw-end pump or flange-end pump)

    40/

    Nominal connection diameter

    10

    Nominal delivery head [m] at Q = 0 m3/ h

    wishlist Compare
    £1,383.60 RRP £899.34 £749.45
    Wilo
    In Stock In stock
    Delivery Icon Free Standard Delivery
  12. Wilo TOP-S 50/7 Replacement Head - 1 Phase

    2080018

    Wilo - TOP-S 50/7 REPLACEMENT Head - 230V - 1 Phase

    Please ensure Top-S replacement head part is appropriate for your pump model. Replacement heads unfortunately CANNOT be returned if they have been attempted to be fitted. If unsure please contact 0800 008 6405.

    Can be utilised for Hot-water heating systems of all sorts, industrial circulation systems, air-conditioning systems and closed cooling circuits.

    Maintenance-free glandless circulation pump with threaded or flange connection, pre-selectable speed stages for power adjustment.

    Item includes:

    Pump, Thermal insulation, Including seals for threaded connection, Washers for flange screws (for nominal connection diameters DN 40 - DN 65), and Installation manual and operating instructions.

    Advantages:

    Direction of rotation signal lamp for displaying the correct sense of rotation (only with 3~), Manual power adjustment with 3 speed stages, and Pump housing with cataphoretic coating (KTL) protects against corrosion due to condensation formation.

    Tech Info
    • Permitted temperature range -20 C to +130 C, for short periods (2 h) to +140 C (TOP-S 25/13, 80/15, 80/20: -20 C to +110 C)
    • Mains connection:
      • 1~230 V, 50 Hz (depending on type)
      • 3~230 V, 50 Hz (with optional switching plug)
      • 3~400 V, 50 Hz
    • Protection class IP X4D
    • Screwed connection or flange connection (depending on type) Rp 1 to DN 100
    • Max. operating pressure of standard version: 6/10 bar. or 6 bar. (special version: 10 bar.)
    Materials
    • Pump housing: Grey Cast Iron
    • Impeller: Plastic
    • Shaft: Stainless Steel
    • Bearing: Carbon, metal impregnated
    Construction:

    Glandless circulation pump with screwed connection or flange connection.

    Application

    Hot-water heating systems of all sorts, industrial circulation systems, air-conditioning systems and closed cooling circuits

    Equipment/function

    Operating modes

    • Speed-stage switching

    Manual functions

    • Setting the speed stages: 3 speed stages (2 speed stages for 1~ pumps with P2 350 W)

    Automatic functions

    • Internal protection against non-approved high winding temperatures (only for pumps for which P2 180 W)

    Signal and display functions

    • Thermal winding contact (WSK, potential-free NC contact) only for pumps for which P2 180 W) for full motor protection in all speed levels with optional tripping unit SK 602N/SK 622N
    • Direction of rotation control light (only for 3~pumps )
    • Display of selected speed stage

    Dual pump management (twin-head pump or 2 x single pumps)

    • Main/standby operation or parallel operation (for automatic fault-actuated switchover/time-dependent pump cycling, a corresponding switchgear must be provided on-site)

    Equipment

    • For flange-end pumps: Flange versions
      • Standard version for DN 40 to DN 65 pumps: PN 6/10 combination flange (PN 16 flange according to EN 1092-2) for PN 6 and PN 16 counter flanges,
      • Standard version for DN 80/DN 100 pumps: PN 6 flange (engineered for PN 16 according to EN 1092-2) for PN 6 counter flange
    • Cable inlet possible from both sides (only for 1~pumps and 3~pumps with P2180 W)
    • Thermal insulation as standard for heating applications
    Type key

    Example:

    TOPS 40/10

    TOP-S

    Standard pump (screw-end pump or flange-end pump)

    40/

    Nominal connection diameter

    10

    Nominal delivery head [m] at Q = 0 m3/ h

    wishlist Compare
    £1,668.00 RRP £1,084.20 £903.50
    Wilo
    In Stock In stock
    Delivery Icon Free Standard Delivery
  13. Wilo TOP-S 65/7 Replacement Head - Single Phase

    2080019

    Wilo - TOP-S 65/7 REPLACEMENT Head - Single Phase

    Please ensure Top-S replacement head part is appropriate for your pump model. Replacement heads unfortunately CANNOT be returned if they have been attempted to be fitted. If unsure please contact 0800 008 6405.

    Replacement Motor and Terminal Box to repair a Wilo - TOP-S 65/7



    Wilo (est. 1872) is a German manufacturer delivering building-services and water-management pumps. Their ranges include circulators, booster sets, drainage pumps and sewage systems. Wilo products are commonly used in heating and cooling circulation, pressure boosting, commercial building services and public water infrastructure.

    wishlist Compare
    £1,766.40 RRP £1,148.16 £956.80
    Wilo
    In Stock In stock
    Delivery Icon Free Standard Delivery
  14. Wilo TOP-S 30/5 Replacement Head - Single Phase

    29991405

    Wilo - TOP-S 30/5 REPLACEMENT Head - 230V - Single Phase

    Please ensure Top-S replacement head part is appropriate for your pump model. Replacement heads unfortunately CANNOT be returned if they have been attempted to be fitted. If unsure please contact 0800 008 6405.

    Replacement Motor and Terminal Box to repair a Wilo - TOP-S/SD 30/5

    wishlist Compare
    £571.20 RRP £371.28 £309.40
    Wilo
    In Stock In stock
    Delivery Icon Free Standard Delivery
  15. Dab Evoplus 40/180 M Electronic Circulator

    60150938

    DAB - EVOPlus 40/180 M Electronic Circulator - 230V - Single Phase - Threaded Connection - 100 Ltr/min

    The DAB Evoplus 40/180 M Electronic Circulator - 230v - Single Phase - Threaded Connection is a Circulator Pump item. This product is manufactured by Dab. Voltage for this item is 230V. It has an actual flow rate of 100 Ltr/min. The maximum head for this pump is 4m. This is a Surface Mounted pump which can be suitable when the pump can sit in a dry, accessible location and draw liquid in via a suction pipe or hose.

    DAB Evoplus is a low-energy electronic circulator for water circulation in commercial heating and air-conditioning systems.

    It supports multiple operating modes (e.g., proportional/constant pressure and constant speed, model dependent) and is designed to adapt performance to system demand.

    wishlist Compare
    £623.44 RRP £342.89 £285.74
    DAB Pumps
    In Stock In stock
    Delivery Icon Free Standard Delivery
  16. Dab Evoplus 60-180 M Electronic Circulator - 230v - Single Phase - Threaded Connection

    60150939

    DAB - EVOPlus 60-180 M Electronic Circulator - 230V - Single Phase - Threaded Connection - 44 Ltr/min - 11m Head

    EVOPLUS electronic circulators can be applied in heating, ventilation and air conditioning systems for residential and commercial buildings.

    DAB Evoplus is a low-energy electronic circulator for water circulation in commercial heating and air-conditioning systems.

    It supports multiple operating modes (e.g., proportional/constant pressure and constant speed, model dependent) and is designed to adapt performance to system demand.

    wishlist Compare
    £698.57 RRP £384.22 £320.18
    DAB Pumps
    In Stock In stock
    Delivery Icon Free Standard Delivery
View as Grid List

1635 Items

Page
per page
Filter Products
Set Descending Direction
0 products in this section | View All
Filters Products
Filters Products
Next Day Delivery
  1. Yes 131 items
Cable length
  1. 1.5m 27 items
Duty Type
  1. Domestic 236 items
  2. Commercial 1390 items
Flow Rate
  1. 0 - 50Ltr/min 7 items
  2. 51 - 100Ltr/min 67 items
  3. 101 - 150Ltr/min 70 items
  4. 151 - 200Ltr/min 91 items
  5. 201 - 250Ltr/min 49 items
  6. 251 - 300Ltr/min 95 items
  7. 301 - 350Ltr/min 69 items
  8. 351 - 400Ltr/min 94 items
  9. 401 - 450Ltr/min 73 items
  10. 451 - 500Ltr/min 56 items
  11. 501 - 550Ltr/min 68 items
  12. 551 - 600Ltr/min 51 items
  13. 601 - 650Ltr/min 55 items
  14. 651 - 700Ltr/min 41 items
  15. 701 - 750Ltr/min 46 items
  16. 751 - 800Ltr/min 24 items
  17. 801 - 850Ltr/min 42 items
  18. 851 - 900Ltr/min 19 items
  19. 901 - 950Ltr/min 27 items
  20. 951 - 1000Ltr/min 20 items
  21. 1001 - 1050Ltr/min 9 items
  22. 1051 - 1100Ltr/min 11 items
  23. 1101 - 1150Ltr/min 21 items
  24. 1151 - 1200Ltr/min 18 items
  25. 1201 - 1250Ltr/min 7 items
  26. 1251 - 1300Ltr/min 13 items
  27. 1301 - 1350Ltr/min 12 items
  28. 1351 - 1400Ltr/min 3 items
  29. 1401 - 1450Ltr/min 13 items
  30. 1451 - 1500Ltr/min 6 items
  31. 1501 - 1550Ltr/min 27 items
  32. 1551 - 1600Ltr/min 6 items
  33. 1601 - 1650Ltr/min 9 items
  34. 1701 - 1750Ltr/min 6 items
  35. 1751 - 1800Ltr/min 5 items
  36. 1801 - 1850Ltr/min 1 item
  37. 1851 - 1900Ltr/min 9 items
  38. 1901 - 1950Ltr/min 8 items
  39. 1951 - 2000Ltr/min 3 items
  40. 2001 - 2050Ltr/min 4 items
  41. 2051 - 2100Ltr/min 5 items
  42. 2101 - 2150Ltr/min 5 items
  43. 2151 - 2200Ltr/min 4 items
  44. 2201 - 2250Ltr/min 7 items
  45. 2251 - 2300Ltr/min 8 items
  46. 2301 - 2350Ltr/min 3 items
  47. 2351 - 2400Ltr/min 4 items
  48. 2401 - 2450Ltr/min 5 items
  49. 2451 - 2500Ltr/min 4 items
  50. 2501 - 2550Ltr/min 7 items
  51. 2551 - 2600Ltr/min 3 items
  52. 2601 - 2650Ltr/min 11 items
  53. 2651 - 2700Ltr/min 8 items
  54. 2701 - 2750Ltr/min 3 items
  55. 2751 - 2800Ltr/min 1 item
  56. 2801 - 2850Ltr/min 8 items
  57. 2851 - 2900Ltr/min 5 items
  58. 2901 - 2950Ltr/min 4 items
  59. 2951 - 3000Ltr/min 4 items
  60. 3001 - 3050Ltr/min 1 item
  61. 3151 - 3200Ltr/min 4 items
  62. 3251 - 3300Ltr/min 1 item
  63. 3401 - 3450Ltr/min 6 items
  64. 3451 - 3500Ltr/min 1 item
  65. 3551 - 3600Ltr/min 1 item
  66. 3601 - 3650Ltr/min 1 item
  67. 3651 - 3700Ltr/min 6 items
  68. 3701 - 3750Ltr/min 3 items
  69. 3751 - 3800Ltr/min 1 item
  70. 3851 - 3900Ltr/min 5 items
  71. 4051 - 4100Ltr/min 2 items
  72. 4151 - 4200Ltr/min 1 item
  73. 4201 - 4250Ltr/min 4 items
  74. 4301 - 4350Ltr/min 3 items
  75. 4351 - 4400Ltr/min 2 items
  76. 4601 - 4650Ltr/min 1 item
  77. 4651-4700Ltr/min 4 items
  78. 4801 - 4850Ltr/min 2 items
  79. 5051 - 5100Ltr/min 1 item
  80. 5201 - 5250Ltr/min 3 items
  81. 5251 - 5300Ltr/min 4 items
  82. 5901 - 5950Ltr/min 1 item
  83. 6001 - 6050Ltr/min 1 item
  84. 6301 - 6350Ltr/min 3 items
  85. 6501 - 6550Ltr/min 1 item
  86. 6601 - 6650Ltr/min 3 items
  87. 6651 - 6700Ltr/min 3 items
  88. 6951 - 7000Ltr/min 1 item
  89. 7001 - 7050Ltr/min 5 items
  90. 7201 - 7250Ltr/min 1 item
  91. 7251 - 7300Ltr/min 1 item
  92. 8101 - 8150Ltr/min 1 item
  93. 8201 - 8250Ltr/min 1 item
  94. 8601 - 8650Ltr/min 1 item
  95. 8651 - 8700Ltr/min 2 items
  96. 9401 - 9450Ltr/min 1 item
  97. 9701 - 9750Ltr/min 1 item
  98. 10501 - 10550Ltr/min 1 item
  99. 10551 - 10600Ltr/min 1 item
Manufacturer
Dab 119 items
Grundfos 1406 items
IMP 1 item
Lowara 20 items
Smedegaard 1 item
Stuart Turner 1 item
Wilo 87 items
Max Head
  1. 0 - 10m 391 items
  2. 11 - 20m 223 items
  3. 21 - 30m 30 items
  4. 31 - 40m 10 items
  5. 41 - 50m 2 items
  6. 51 - 60m 2 items
  7. 61 - 70m 21 items
  8. 101 - 110m 5 items
  9. 191 - 200m 1 item
AC Power
  1. Single Phase 725 items
  2. Three Phase 906 items
Port To Port
  1. 80mm 1 item
  2. 130mm 3 items
  3. 140mm 1 item
  4. 150mm 1 item
  5. 180mm 83 items
  6. 220mm 124 items
  7. 240mm 19 items
  8. 250mm 131 items
  9. 280mm 158 items
  10. 320mm 31 items
  11. 340mm 215 items
  12. 360mm 133 items
  13. 440mm 112 items
  14. 450mm 66 items
  15. 475mm 41 items
  16. 500mm 42 items
  17. 550mm 58 items
  18. 620mm 50 items
  19. 670mm 20 items
  20. 800mm 71 items
  21. 900mm 25 items
  22. 1000mm 10 items
  23. 1240mm 5 items
Price
Pump Material
  1. Brass 1 item
  2. Bronze 59 items
  3. Cast iron 1302 items
  4. Stainless Steel 78 items
Pump Operation
  1. Automatic (with float switch) 3 items
  2. Manual (without float switch) 112 items
Speed
  1. Fixed 460 items
  2. Variable 465 items
Submersible vs Surface Mounted
  1. Surface Mounted 753 items
Switch
  1. None 457 items
Electrical supply
  1. 230V 428 items
  2. 240V 295 items
  3. 275V 1 item
  4. 400V 53 items
  5. 415V 481 items
  6. 420V 14 items
  7. 480V 72 items
  8. 500V 140 items
  9. 690V 40 items
  10. 725V 106 items
Water type
  1. Clean Water 14 items
  2. Clean or Discoloured 1538 items
Pump Type Filter
  1. Central Heating Pump 3 items
  2. Centrifugal Pump 28 items
  3. Circulating Pump 3 items
  4. Circulator Pump 1531 items
  5. Replacement Pump Head 60 items
  6. Spares 7 items
Bars
  1. 6 bar 26 items
  2. 10 bar 192 items
  3. 16 bar 390 items
Impeller Type
  1. Single 627 items
  2. Twin 80 items
Heating Circulators

Heating Circulators

Heating circulator pumps keep hot water moving through radiators, baseboards, and underfloor heating systems. They ensure your heating system delivers warmth quickly, reduces waiting times for hot water, and keeps energy use under control.

 

Whether used individually or in combination, circulator pumps can serve multiple zones, giving precise control over each area of your property. In multi-zone systems, one circulator can serve all areas using control valves for each section, or you can fit a dedicated pump to each zone for precise, independent flow.

 

Modern circulators save significant power while maintaining consistent flow. Pumpify offers a range of trusted models from big name brands that are built for durability, smooth operation, and long-lasting performance, helping you get the most out of your heating system.