Submersible Unit

The Supervort 140A submersible pump is intended for the transference of dirty water and is capable of handling semi-solids in suspension of up to 20 mm diameter.
This pump is compact in design, easy to install and features an external adjustable float switch.

Submersible Unit

The Supervort 240A submersible pump is intended for the transference of dirty water and is capable of handling semi-solids in suspension of up to 20 mm diameter.
This pump is compact in design, easy to install and features an external adjustable float switch.

The Ebara - Best One M Manual Submersible Pump - No Float Switch 110v is a AISI 304 stainless steel submersible pump with mechanical seal in Ceramic/Carbon/NBR and oversized oil chamber that increase the life and reliability. BEST ONE has a semi-open impeller, while BEST ONE VOX is equipped with vortex type impeller, to guarantee a greater free passage and reduce the possibility of clogging.

The Ebara - Best One MA Automatic Submersible Pump - With Float Switch 110v is a AISI 304 stainless steel submersible pump with mechanical seal in Ceramic/Carbon/NBR and oversized oil chamber that increase the life and reliability. BEST ONE has a semi-open impeller, while BEST ONE VOX is equipped with vortex type impeller, to guarantee a greater free passage and reduce the possibility of clogging.

The Ebara - Best One VOX M Manual Submersible Pump - No Float Switch 110v is a AISI 304 stainless steel submersible pump with mechanical seal in Ceramic/Carbon/NBR and oversized oil chamber that increase the life and reliability. BEST ONE has a semi-open impeller, while BEST ONE VOX is equipped with vortex type impeller, to guarantee a greater free passage and reduce the possibility of clogging.

The Ebara - Best One VOX MA Automatic Submersible Pump - With Float Switch 110v is a AISI 304 stainless steel submersible pump with mechanical seal in Ceramic/Carbon/NBR and oversized oil chamber that increase the life and reliability. BEST ONE has a semi-open impeller, while BEST ONE VOX is equipped with vortex type impeller, to guarantee a greater free passage and reduce the possibility of clogging.

Fitted with a suction strainer, a carrying handle and is supplied with a 5 m mains cable.

The impeller is a semi-open impeller for 10 mm free passage suitable for pumping groundwater, surface water, rain water and similar liquids.

The pump has a double shaft seal consisting of two lip seals with grease in-between.

The pump has an outer casing ensuring continuous cooling of the motor by the pumped liquid.

The rotor shaft operates in two maintenance-free carbon bearings cooled by the pumped liquid The motor is filled with a non-toxic motor liquid.

The Clarke - HSE 300A - Submersible Pump - 230V

Clarkes powerful and rugged industrial quality submersible pump has a Stainless Steel drive shaft and chrome plated body, plus a 50mm (2") diameter outlet.

The ABS / Sulzer MF range is a compact series of submersible pumps built for wastewater handling and general dewatering duties at a variety of temperatures.

They're used for internal and external drainage, including removing effluent from locations below the sewer backflow level in line with EN 12056. Dirty water and grey wastewater containing solids can be pumped efficiently, with vortex hydraulics helping to minimise blockages when solids and debris are present. Models from MF154 through to MF804 provide different performance and solids-handling capabilities to suit anything from domestic drainage to heavier commercial effluent removal.

Compact submersible pump for the removal of domestic and commercial high temperature wastewater that can contain solids up to 20 mm.

Applications

The MF 154HW submersible pump has been engineered to cover a wide range of internal and external dewatering applications, but primarily where the temperature of the medium exceeds the standard upper limit (40 °C) to a maximum allowable temperature of 80 °C. This product is manufactured by ABS.

Pumping of high temperature discharge water from laundries, commercial dishwashers and washing machines.

Filling and emptying of containers, drainage of flooded cellars and removal of rainwater.

Appropriate for use in septic tanks and pumping effluent from locations below the backwash level in accordance with EN 12056

The vortex hydraulics are particularly appropriate for the pumping of fluids containing gaseous or abrasive particles.

The compact shape of the MF, fittings for easy mounting, and small sump requirements, ensure a quick and cost-effective installation of the pump.

Maximum allowable temperature of the pumped medium is 80 °C (90 °C for max.5 minutes).

The ABS Sulzer MF154 Hot Water Submersible Pump is a Submersible product. It also features a Float Switch.

Applications

The Flotec VIP130-6 Submersible Pump - Manual - 230v is a Submersible product. This product is manufactured by Flotec. Voltage for this item is 230V. It is supplied with a 10m cable. It has an actual flow rate of 130 Ltr/min. The maximum head for this pump is 6m.

Applications

The Flotec VIP180-7 Submersible Pump - Automatic - 230v is a Submersible product. This product is manufactured by Flotec. Voltage for this item is 230V. It is supplied with a 10m cable. It has an actual flow rate of 180 Ltr/min. The maximum head for this pump is 7m. It also features a Float Switch.

The Flotec Compac range of submersible drainage pumps are for clean water developed to drain domestic applications, empty and dry flooded rooms, basements, draw water from wells, basins or cisterns.

The Flotec Compac Pumps are ideal for limited spaces.

Complete with intergral float switch, which can be selected in automatic or manual mode.

In automatic mode the Flotec Compac Pump switches on when the water level reaches approx 140mm and switches off at approx 30mm.

In manual mode the level of water can be pumped down to approx 3mm.

The Flotec Compac 200 Submersible Pump - Automatic - 230v is a Sump Pump item. This product is manufactured by Flotec. Voltage for this item is 230V. It is supplied with a 10m cable. It has an actual flow rate of 190 Ltr/min. The maximum head for this pump is 10m. It also features a Float Switch.

Includes and benefits

The DAB FEKA VS 550 M-A Submersible Pump - Automatic - 230v is a Submersible product. This product is manufactured by Dab. Voltage for this item is 230V. It is supplied with a 10m cable. It has an actual flow rate of 533 Ltr/min. The maximum head for this pump is 14m. It also features a Float Switch.

Includes and benefits

The DAB FEKA VS 550 M-NA Submersible Pump - Manual - 230v is a Submersible product. This product is manufactured by Dab. Voltage for this item is 230V. It is supplied with a 10m cable. It has an actual flow rate of 533 Ltr/min. The maximum head for this pump is 14m.