Dab

Wet rotor electronic circulator with bronze pump body engineered for the circulation of domestic hot water in small collective domestic, residential, civil and commercial systems.

Wet rotor electronic circulator engineered for the circulation of water in conditioning and heating systems in commercial building service. This product is manufactured by Dab. The single version includes insulation shells.

Wet rotor electronic circulator engineered for the circulation of water in conditioning and heating systems in commercial building service. This product is manufactured by Dab. The single version includes insulation shells.

Product Applications

Low energy consumption electronic central heating pump for domestic hot water circulation.

Advantages

The new range of EVOSTA 2 SAN circulators by DAB combines the strength of a mechanical circulator with the benefits of an electronic circulator.

Thanks to the permanent magnet synchronous motor, the frequency converter and the energy efficiency of EEI ¢°¤ 0.18, as well as the protection class IPX5 and the integrated bleeding plug. This product is manufactured by Dab. EVOSTA 2 SAN family ranks as one of the best products in the category in terms of performance and reliability.

The range of EVOSTA 2 SAN circulators is the perfect replacement for old three-speed circulators due to its compact size and all-round performance. The product is also extremely user-friendly, with a single button for sequential setting and direct access to the motor shaft for unlocking it when necessary.

Construction Includes

Bronze pump body and wet rotor motor. Steel motor casing, technopolymer impeller. Ceramic motor shaft on ceramic bushings lubricated by the pumped liquid.

Stainless Steel rotor liner and closing flange. Graphite thrust ring. EPDM seal ring and brass air bleeding plug. Thanks to the internal protection of the motor, the pump does not require any overload protection.

Control Panel

The settings of EVOSTA 2 SAN circulators can be modified in the control panel on the facia of the pump. The pump has nine settings that can be selected scrolling the MODE button.

Six illuminated segments on the display indicate the settings of the pump.

The DAB Evosta2 SAN V 11-139 Domestic Heating Circulator Pump - 240v - Single Phase is a Circulator Pump item. Voltage for this item is 240V. It is supplied with a 1.5m cable. The maximum head for this pump is 1m. This is a Surface Mounted pump which can be suitable when the pump can sit in a dry, accessible location and draw liquid in via a suction pipe or hose.

Compact wet rotor electronic circulator with bronze pump body engineered for the circulation of domestic hot water in commercial building service. This product is manufactured by Dab. It is equipped with an integrated variable frequency drive to ensure better all-round performance and energy efficiency, it also protects the system against water hammer action.

Circulator for domestic hot water systems of the closed circuit pressurized type or open circuit type. This product is manufactured by Dab. Bronze pump body. Motor casing in die-cast aluminium. Technopolymer impeller. Ceramic motor shaft mounted on graphite bushings lubricated by the pumped liquid. Stainless Steel rotor sleeve, stator sleeve and closing flange. Ceramic thrust ring, ethylene propylene sealing rings. Synchronous motor with permanent magnet rotor.

Submersible pumps appropriate for pumping waste water and sewage from private and commercial dwellings and municipal sewer networks, in accordance with European standard EN 12050-1.

With full free passage Cast Iron vortex impeller with new anti-clogging profile,

Double cartridge mechanical seal as standard in SiC/SiC silicon carbide on the hydraulics side and SiC/C silicon carbide on the motor side, independent of the rotation direction. This product is manufactured by Dab. Discharge flange available in DN65, DN80, DN100 versions according to EN 1092-1.

High efficiency three-phase asynchronous motor with squirrel cage rotor, efficiency class IE3. Appropriate for use with liquids with pH between 6.5 and 12. Maximum number of starts per hour: 20. S1 motor for fully submerged continuous operation or S3 for discontinuous operation with minimum immersion levels.

Water infiltration sensor in oil chamber, capable of indicating water infiltrations through the mechanical seal (Optional). Overtemperature sensors in the motor windings with intervention threshold at 150°C.

Long-life lubricated bearings for a calculated minimum useful life of 50,000 hours. Stainless Steel motor shaft, engineered with high fatigue strength. Nominal power from 1.1 KW to 11 kW. ATEX version available for use in potentially explosive environments. Maximum installation depth: 20 metres (with cable of appropriate length). For use at liquid temperatures above +40°C.

The DAB FKV 80.15.4 T5 400D Submersible Wastewater Pump - 415v - Three Phase - 1200 Ltr/min. is a Submersible product. Voltage for this item is 400V. It has an actual flow rate of 1200 Ltr/min. The maximum head for this pump is 9.5m.

Product Applications

Automatic water lifting sets, particularly appropriate for domestic use, small installations for civil, industrial and agricultural use, washing systems and hobbies.

These are characterised by the use of JET self-priming electropumps which can operate even when there is air, gas and small quantities of sand in the water.

The set is composed of a diaphragm tank with capacity 20 litres, pressure switch for automatic operation, pressure gauge, JET electropump complete with power cable and plug, kit for coupling the pump and the tank, all assembled and ready for installation. This product is manufactured by Dab.

Construction Includes Of The Pump

Die-cast aluminium pump body and motor support. Technopolymer impeller, diffuser, Venturi tube and sand guard. Stainless Steel pressure discs. Carbon/ceramic mechanical seal.

Construction Features Of The Motor

Induction motor, closed and cooled with external ventilation. Rotor mounted on oversized greased sealed-for-life ball bearings to ensure silent running and long life. Built-in thermal and current overload protection and a capacitor permanently in circuit. Manufactured according to CEI 2-3 and CEI 61-69 standards (EN 60335-2-41). Motor protection: IP44 Terminal box protection: IP55 Insulation class: F

Construction Features Of The Tank

Horizontal type, capacity 20 litres, with butyl diaphragm, complete with feet on the bottom and brackets for fixing the pump on top.

The DAB AQUAJET 82 M-G Booster Set - 240v - Single Phase - 90 Ltr/min. is a Booster Set item. Voltage for this item is 240V. It has an actual flow rate of 90 Ltr/min. The maximum head for this pump is 61m. This is a Surface Mounted pump which can be suitable when the pump can sit in a dry, accessible location and draw liquid in via a suction pipe or hose.

Vertical multistage centrifugal pump appropriate for use in small and medium water supply installations. This product is manufactured by Dab. Appropriate for pressurization units, surge tank supply, rain irrigation and crop-dusting systems, fire-fighting and washing systems, conveyance of condensate and cooling water.

InNOVAtive and durable design. Technopolymer discharge/suction bodies and in-line suction and discharge ports with threaded metal insert. Impellers, diffuser bodies and diffusers in technopolymer, fully rust-proof.

Stainless Steel AISI 303 pump jacket, adjustment rings and seal disk. Carbon/ceramic mechanical seal, fitted on the AISI 303 stainless-steel drive shaft extension. Asynchronous, closed motor cooled by external ventilation.

Rotor mounted on oversized greased sealed-for-life ball bearings to ensure silent running and long life. Built-in thermal and current overload protection and a capacitor permanently on in the singlephase version. Protection for the three-phase version is the responsibility of the user. Built in CEI 2-3/CEI 61/69 (EN 60335-2-41) standards.

The DAB KVC 60-120 T-IE3 Centrifugal Multi-Stage Pump - 415v - Three Phase is a Centrifugal Pump item. Voltage for this item is 400V. This is a Surface Mounted pump which can be suitable when the pump can sit in a dry, accessible location and draw liquid in via a suction pipe or hose.

Submerged aerator engineered for the aeration of sewage in small purification systems. This product is manufactured by Dab. Further uses are in the oxygenation of garden ponds and fresh water fish farms. Thanks to its design, NOVAIR ensures optimal oxygenation of purification systems by creating a large and dense cloud of fine bubbles.

The fluid-dynamic study was particularly focapplied on the profile of the blade of the impeller, to make sure that its start would not damage the micro-organisms in the liquid. Due to its installation in a vertical position, the aerator body is fitted with a support base. From a technical point of view, the cooling of the motor is ensured by large contact surfaces between the motor casing and the liquid.

In addition to being resin-coated to ensure operation even in the presence of moisture and possible seepage, the wiring of the power input cable has been made easier to simplify maintenance activities and the replacement of the same.

The steel motor shaft with ceramic treated bushing in the area of the seal rings guarantees high wear resistance and extended product life. Technopolymer pump body, wiring cover, and impellers. Complete with gasket and 90° Bar.b bend for vertical inlet.

The DAB NOVAIR 200 M-NA Submersible Aerator - 240v - Single Phase is a Submersible product. Voltage for this item is 240V. It is supplied with a 5m cable.

Peripheral centrifugal pumps for use in residential building service engineered for pressurization, rainwater reuse and gardening and irrigation. This product is manufactured by Dab. KPF has the threaded inlet on the front. Air-cooled asynchronous motor. Brass impeller. Motor shaft in AISI 416 Stainless Steel. Motor circuit breaker and permanent capacitor included as standard in the single-phase version. Protection by the user for the three-phase versions.

Construction Includes Of The Pump

KPF has the threaded inlet on the front. Carbon-ceramic mechanical seal. Brass impeller.

Construction Features Of The Motor

Air-cooled asynchronous motor. Motor shaft in AISI 416 Stainless Steel.Motor circuit breaker and permanent capacitor included as standard in the single-phase version.Protection by the user for the three-phase versions.

The DAB KPF 30/16 M Centrifugal Peripheral Pump - 240v - Single Phase - 50 Ltr/min. is a Peripheral Pump item. Voltage for this item is 240V. It has an actual flow rate of 50 Ltr/min. The maximum head for this pump is 84m. This is a Surface Mounted pump which can be suitable when the pump can sit in a dry, accessible location and draw liquid in via a suction pipe or hose.

Wet rotor electronic circulator engineered for the circulation of water in conditioning and heating systems in commercial building service. This product is manufactured by Dab. The single version includes insulation shells.
The Evoplus D versions are supplied as standard with an automatic non-return suction valve incorporated in the delivery port to avoid water recirculating through the unit when it is not running and a blank flange for servicing either of the two motors. Possibility of remote control with the DConnect service (DConnect Box supplied separately).

Single impeller centrifugal pupm appropriate for domestic, civil, industrial and agricultural installations and for decanting, mixing and irrigating uses. This product is manufactured by Dab. Cast Iron pump body and motor support. Technopolymer or Cast Iron impeller (depending on the models). Stainless Steel driving shaft.

Carbon/ceramic mechanical seal. Asynchronous, closed motor, cooled by external ventilation. Built-in thermal and current overload protection and a capacitor permanently on in the singlephase version.

For the protection of the three-phase motor it is advisable to use a suitable overload protection complying with the regulations in force.

Product Applications

Single impeller centrifugal pump

Construction Includes Of The Pump

Cast Iron pump body and motor support. Technopolymer impeller for K 20/41, K 30/70, K 30/100, K 36/100, K 12/200, K 36/200, K 40/200, K 55/200. Cast Iron impeller for K 14/400, K 11/500, K 18/500, K 28/500, K 40/400, K 50/400, K 30/800, K 40/800, K 50/800, K 20/1200, K 25/1200, K 35/1200. Carbon/ceramic mechanical seal.

Construction Features Of The Motor

Induction motor, closed and cooled with external ventilation.Rotor mounted on oversized greased sealed-for-life ball bearings to ensure silent running and long life.Built-in thermal and current overload protection and a capacitor permanently in circuit in the single-phase version.Three-phase motors should be protected with a suitable overload protection complying with the regulations in force.Manufactured according to CEI 2-3 standards.Motor protection: IP44 (IP 55 for motor to 2,2 - 3 - 4 - 5,5 - 7,5 - 9,2 - 11 kW)Terminal box protection: IP55Insulation class: F

The DAB K 40/400 T-IE3 Single-Impeller Centrifugal Pump - 415v - Three Phase is a Centrifugal Pump item. Voltage for this item is 400V. This is a Surface Mounted pump which can be suitable when the pump can sit in a dry, accessible location and draw liquid in via a suction pipe or hose.

Wet rotor electronic circulator engineered for the circulation of water in conditioning and heating systems in commercial building service. This product is manufactured by Dab. The integrated variable frequency drive ensures greater comfort and protection against water hammer action, and also saves energy by adapting the motor speed to actual requirements.

The DAB VORTEX BWO 155V Timer Hot Water Circulator - 11/4" - 240v - Single Phase - NO DESCRIPTIVE DATA is a Circulator Pump item. This product is manufactured by Dab. Voltage for this item is 240V. It has an actual flow rate of 15 Ltr/min. The maximum head for this pump is 1.3m. This is a Surface Mounted pump which can be suitable when the pump can sit in a dry, accessible location and draw liquid in via a suction pipe or hose.

Wet rotor electronic central heating circulator pump engineered for the circulation of water in conditioning and heating systems in commercial building service. This product is manufactured by Dab. The single version includes insulation shells.