Dab

ESYTANK/ESYTANK 300 Mini is a tank with a 275l capacity, suitable for use with drinking water.

DAB ESYTANK units are robust, compact break-tank style solutions intended for domestic and light commercial installations, helping stabilise demand peaks and maintain consistent performance from a connected booster pump system.

• Creates a buffer store to support steady boosted supply
• Helps protect booster operation where mains supply is variable
• Neat, above-ground tank format for plant rooms and utility spaces
• Suitable for clean / potable-water boosting setups (installation dependent)

Common uses include whole-house pressure boosting, small commercial outlets, multi-outlet properties, and sites where a buffer tank improves system stability and reduces reliance on gravity fed systems.

ESYTANK Mini is a drinking water storage tank, developed with integration of the ESYBOX Mini booster pump system.

DAB ESYTANK units are robust, compact break-tank style solutions intended for domestic and light commercial installations, helping stabilise demand peaks and maintain consistent performance from a connected booster pump system.

• Creates a buffer store to support steady boosted supply
• Helps protect booster operation where mains supply is variable
• Neat, above-ground tank format for plant rooms and utility spaces
• Suitable for clean / potable-water boosting setups (installation dependent)

Common uses include whole-house pressure boosting, small commercial outlets, multi-outlet properties, and sites where a buffer tank improves system stability and reduces reliance on gravity fed systems.

ESYTWIN is applied to be able to mount 2 Qty ESYBOX's side by side for systems where either a larger flow or a where stand-by pump is required.

The suction and discharge 1" ¼ NPT connection can be made at either side of the dock or on the same side to make piping up the dock as easy as possible.

BENEFITS:
INCREASING CAPACITY
INCREASING THE RELIABILITY
WIRELESS COMMUNICATION
The ESYBOX's can comunicate with each other without a cable, by means of wireless Communications of up to 4 ESYBOX's that can talk to each other to allow for easy set-up and duty rotation.
The whole pump is mounted in a sound-proof closed ABS housing.
Thanks to the inverter and synchronous motor ESYBOX there will be a huge energy saving with no pressure surges and less stress on pipes & fittings.

The DAB ESYTWIN MINI BASE is a Booster Set item. This product is manufactured by Dab. Voltage for this item is 230V.

The DAB ESYTANK 300 MINI Fitted with ESYDOCK MINI + ESYBOX MINI is a Booster Set item. This product is manufactured by Dab. Voltage for this item is 230V.

DAB ESYTANK units are robust, compact break-tank style solutions intended for domestic and light commercial installations, helping stabilise demand peaks and maintain consistent performance from a connected booster pump system.

• Creates a buffer store to support steady boosted supply
• Helps protect booster operation where mains supply is variable
• Neat, above-ground tank format for plant rooms and utility spaces
• Suitable for clean / potable-water boosting setups (installation dependent)

Common uses include whole-house pressure boosting, small commercial outlets, multi-outlet properties, and sites where a buffer tank improves system stability and reduces reliance on gravity fed systems.

The DAB ESYTANK 500 MINI Fitted with ESYDOCK MINI + ESYBOX MINI is a Booster Set item. This product is manufactured by Dab. Voltage for this item is 230V.

DAB ESYTANK units are robust, compact break-tank style solutions intended for domestic and light commercial installations, helping stabilise demand peaks and maintain consistent performance from a connected booster pump system.

• Creates a buffer store to support steady boosted supply
• Helps protect booster operation where mains supply is variable
• Neat, above-ground tank format for plant rooms and utility spaces
• Suitable for clean / potable-water boosting setups (installation dependent)

Common uses include whole-house pressure boosting, small commercial outlets, multi-outlet properties, and sites where a buffer tank improves system stability and reduces reliance on gravity fed systems.

ESYBOX is a patented booster system, unique in its category, with high performance, efficient, compact, easy and satisfying in the use both for the installer and the final user.
When ESYBOX mini is the solution for water boosting in small dwellings, ESYBOX offers the same advantages in collective residential applications, such as villas or condos. This product is manufactured by Dab. Wireless technology enables to set up booster sets up to 4 pumps.

ESYTANK/ESYTANK 300 Mini is a tank with a 275l capacity, suitable for use with drinking water.

It features a valve for filling from the mains with an unrestricted air gap float for backflow prevention, in line with standard UNI EN 1717.

The CAT3 version features an AG-type air gap overflow system with DN50 outlet, while the CAT5 has an AB-type air gap system with auxiliary DN50 outlet.

The AG- or AB-type overflow systems on both versions are located at the back; The water tank comes with an insect guard that can be attached with special screws.

ESYTANK/ESYTANK 300 Mini comes with ESYDOCK, suction pipe with foot valve and delivery line.

Operating range: capacity up to 120 l/min; head up to 65 m.

Liquid temperature range: from 0°C to +35°C for domestic use for other use: from 0°C to +40°C.

Insulation: Horizontal or vertical fixed position.

Maximum operating pressure: 8 Bar. (800 kPa)

The DAB ESYTANK 300 + ESYBOX is a Booster Set item. Voltage for this item is 230V.

The operating pressure of this is 6 Bar.

The ESYTANK & ESYBOX combined create a complete pressure boosting system with high-efficiency allowing for:

Construction Charecteristics:

The DAB ESYTANK has a maximum water capacity of 480 litres, Appropriate for use with drinking water. This product is manufactured by Dab.

Mains water in-let valve for filling from the water mains with integrated float and free discharge in compliance with UNI EN 1717. Overflow connection system type AG as per the same standard (UNI EN 1717 "Protection against pollution of potable water³).
The tank is supplied complete with ESYDOCK, a suction pipe with foot valve, and a delivery pipe.
The tank is
On the front wall there is the possibility of connecting a plug or a discharge pipe with a pipe that can be welded or glued on.
On the rear, at the bottom, there is access to a possible direct drain under the tank.
Both auxiliary discharge points can be drilled as required.
System maintenance is also simple thanks to the handy inspection lid. ESYTANK has a modular design giving the possibility of installing additional tanks on
three different sides (at the side and rear).
Nothing else is needed, ESYTANK in combination ESYBOX to guarantee the correct connection, installation and operation in residential and light commercial
applications.

The DAB ESYBOX And ESYTANK Mains Booster Set - Cat 5 - 500 Litre Tank Capacity - 120 Ltr/min. - Single Phase is a Booster Set item. Voltage for this item is 230V. It has an actual flow rate of 120 Ltr/min.

Product Applications

An in-line circulator pump engineered for circulating hot or cold water. This product is manufactured by Dab. Appropriate for installation directly onto the pipework of civil and industrial heating, air conditioning, refrigeration and sanitary water systems.

Construction Features Of The Pump

Pump body and motor support in Cast Iron.
PN 10 flanged suction and delivery ports with threaded holes for control manometers. To make replacement in existing systems easier, the pump can accept PN 6 counter flanges.
Technopolymer impeller. Carbon/ceramic mechanical seal.
The pumps are available both in the single (KLM-KLP) and in the twin (DKLM-DKLP) versions.
For the twin version, a built in clapet valve in the delivery port is also included, to avoid water recirculation when the unit is idle. A blind flange is also supplied as a standard, to be applied during maintenance of one of the two motors.
The twin version gives the possibility of alternating the operation of the pumps when a backup unit is required, or to have the two pumps operating simultaneously.

Construction Features Of The Motor

External ventilation cooling, closed, asynchronous type, with four poles for the KLM and DKLM versions, and two poles for the KLP and DKLP versions.
Rotor running on permanently lubricated ball bearings, oversized to ensure low noise and durability.
Standard built-in thermo-amperometric protection. Capacitor permanently fitted on single phase versions.
For the protection of the three-phase motor, we recommend the use of remote overload cut-outs, in compliance with current local regulations.
Construction according to CEI 2-3.
Protection class: IP 55
Insulation class: F
Standard voltage: single-phase 220-240 V, 50 Hz - three-phase 230/400 V, 50 Hz

The DAB KLP 80-1600/BQQE In-Line Circulator Pump IE3 - 3x230/400v - Single Phase - 16m Head is a Circulator Pump item. Voltage for this item is 400V. It has an actual flow rate of 1400 Ltr/min. The maximum head for this pump is 16m. This is a Surface Mounted pump which can be suitable when the pump can sit in a dry, accessible location and draw liquid in via a suction pipe or hose.

Product Applications

An in-line circulator pump engineered for circulating hot or cold water. This product is manufactured by Dab. Appropriate for installation directly onto the pipework of civil and industrial heating, air conditioning, refrigeration and sanitary water systems.

Construction Features Of The Pump

Pump body and motor support in Cast Iron.
PN 10 flanged suction and delivery ports with threaded holes for control manometers. To make replacement in existing systems easier, the pump can accept PN 6 counter flanges.
Technopolymer impeller. Carbon/ceramic mechanical seal.
The pumps are available both in the single (KLM-KLP) and in the twin (DKLM-DKLP) versions.
For the twin version, a built in clapet valve in the delivery port is also included, to avoid water recirculation when the unit is idle. A blind flange is also supplied as a standard, to be applied during maintenance of one of the two motors.
The twin version gives the possibility of alternating the operation of the pumps when a backup unit is required, or to have the two pumps operating simultaneously.

Construction Features Of The Motor

External ventilation cooling, closed, asynchronous type, with four poles for the KLM and DKLM versions, and two poles for the KLP and DKLP versions.
Rotor running on permanently lubricated ball bearings, oversized to ensure low noise and durability.
Standard built-in thermo-amperometric protection. Capacitor permanently fitted on single phase versions.
For the protection of the three-phase motor, we recommend the use of remote overload cut-outs, in compliance with current local regulations.
Construction according to CEI 2-3.
Protection class: IP 55
Insulation class: F
Standard voltage: single-phase 220-240 V, 50 Hz - three-phase 230/400 V, 50 Hz

The DAB KLP 80-1200/BQQE In-Line Circulator Pump IE3 - 3x230/400v - Three Phase - 12m Head is a Circulator Pump item. Voltage for this item is 400V. It has an actual flow rate of 1200 Ltr/min. The maximum head for this pump is 12m. This is a Surface Mounted pump which can be suitable when the pump can sit in a dry, accessible location and draw liquid in via a suction pipe or hose.

Product Applications

An in-line circulator pump engineered for circulating hot or cold water. This product is manufactured by Dab. Appropriate for installation directly onto the pipework of civil and industrial heating, air conditioning, refrigeration and sanitary water systems.

Construction Features Of The Pump

Pump body and motor support in Cast Iron.
PN 10 flanged suction and delivery ports with threaded holes for control manometers. To make replacement in existing systems easier, the pump can accept PN 6 counter flanges.
Technopolymer impeller. Carbon/ceramic mechanical seal.
The pumps are available both in the single (KLM-KLP) and in the twin (DKLM-DKLP) versions.
For the twin version, a built in clapet valve in the delivery port is also included, to avoid water recirculation when the unit is idle. A blind flange is also supplied as a standard, to be applied during maintenance of one of the two motors.
The twin version gives the possibility of alternating the operation of the pumps when a backup unit is required, or to have the two pumps operating simultaneously.

Construction Features Of The Motor

External ventilation cooling, closed, asynchronous type, with four poles for the KLM and DKLM versions, and two poles for the KLP and DKLP versions.
Rotor running on permanently lubricated ball bearings, oversized to ensure low noise and durability.
Standard built-in thermo-amperometric protection. Capacitor permanently fitted on single phase versions.
For the protection of the three-phase motor, we recommend the use of remote overload cut-outs, in compliance with current local regulations.
Construction according to CEI 2-3.
Protection class: IP 55
Insulation class: F
Standard voltage: single-phase 220-240 V, 50 Hz - three-phase 230/400 V, 50 Hz

The DAB DKLP 65-1600/BQQE In-Line Circulator Twin Pump IE3 - 3x230/400v - Three Phase - 16m Head is a Circulator Pump item. Voltage for this item is 400V. It has an actual flow rate of 400 Ltr/min. The maximum head for this pump is 17m. This is a Surface Mounted pump which can be suitable when the pump can sit in a dry, accessible location and draw liquid in via a suction pipe or hose.

Product Applications

An in-line circulator pump engineered for circulating hot or cold water. This product is manufactured by Dab. Appropriate for installation directly onto the pipework of civil and industrial heating, air conditioning, refrigeration and sanitary water systems.

Construction Features Of The Pump

Pump body and motor support in Cast Iron.
PN 10 flanged suction and delivery ports with threaded holes for control manometers. To make replacement in existing systems easier, the pump can accept PN 6 counter flanges.
Technopolymer impeller. Carbon/ceramic mechanical seal.
The pumps are available both in the single (KLM-KLP) and in the twin (DKLM-DKLP) versions.
For the twin version, a built in clapet valve in the delivery port is also included, to avoid water recirculation when the unit is idle. A blind flange is also supplied as a standard, to be applied during maintenance of one of the two motors.
The twin version gives the possibility of alternating the operation of the pumps when a backup unit is required, or to have the two pumps operating simultaneously.

Construction Features Of The Motor

External ventilation cooling, closed, asynchronous type, with four poles for the KLM and DKLM versions, and two poles for the KLP and DKLP versions.
Rotor running on permanently lubricated ball bearings, oversized to ensure low noise and durability.
Standard built-in thermo-amperometric protection. Capacitor permanently fitted on single phase versions.
For the protection of the three-phase motor, we recommend the use of remote overload cut-outs, in compliance with current local regulations.
Construction according to CEI 2-3.
Protection class: IP 55
Insulation class: F
Standard voltage: single-phase 220-240 V, 50 Hz - three-phase 230/400 V, 50 Hz

The DAB KLP 65-1600/BQQE In-Line Circulator Pump IE3 - 3x230/400v - Three Phase - 16m Head is a Circulator Pump item. Voltage for this item is 400V. It has an actual flow rate of 500 Ltr/min. The maximum head for this pump is 16m. This is a Surface Mounted pump which can be suitable when the pump can sit in a dry, accessible location and draw liquid in via a suction pipe or hose.

Product Applications

An in-line circulator pump engineered for circulating hot or cold water. This product is manufactured by Dab. Appropriate for installation directly onto the pipework of civil and industrial heating, air conditioning, refrigeration and sanitary water systems.

Construction Features Of The Pump

Pump body and motor support in Cast Iron.
PN 10 flanged suction and delivery ports with threaded holes for control manometers. To make replacement in existing systems easier, the pump can accept PN 6 counter flanges.
Technopolymer impeller. Carbon/ceramic mechanical seal.
The pumps are available both in the single (KLM-KLP) and in the twin (DKLM-DKLP) versions.
For the twin version, a built in clapet valve in the delivery port is also included, to avoid water recirculation when the unit is idle. A blind flange is also supplied as a standard, to be applied during maintenance of one of the two motors.
The twin version gives the possibility of alternating the operation of the pumps when a backup unit is required, or to have the two pumps operating simultaneously.

Construction Features Of The Motor

External ventilation cooling, closed, asynchronous type, with four poles for the KLM and DKLM versions, and two poles for the KLP and DKLP versions.
Rotor running on permanently lubricated ball bearings, oversized to ensure low noise and durability.
Standard built-in thermo-amperometric protection. Capacitor permanently fitted on single phase versions.
For the protection of the three-phase motor, we recommend the use of remote overload cut-outs, in compliance with current local regulations.
Construction according to CEI 2-3.
Protection class: IP 55
Insulation class: F
Standard voltage: single-phase 220-240 V, 50 Hz - three-phase 230/400 V, 50 Hz

The DAB KLP 65-1200/BQQE In-Line Circulator Pump IE3 - 3x230/400v - Three Phase - 12m Head is a Circulator Pump item. Voltage for this item is 400V. The maximum head for this pump is 12m. This is a Surface Mounted pump which can be suitable when the pump can sit in a dry, accessible location and draw liquid in via a suction pipe or hose.

Product Applications

An in-line circulator pump engineered for circulating hot or cold water. This product is manufactured by Dab. Appropriate for installation directly onto the pipework of civil and industrial heating, air conditioning, refrigeration and sanitary water systems.

Construction Features Of The Pump

Pump body and motor support in Cast Iron.
PN 10 flanged suction and delivery ports with threaded holes for control manometers. To make replacement in existing systems easier, the pump can accept PN 6 counter flanges.
Technopolymer impeller. Carbon/ceramic mechanical seal.
The pumps are available both in the single (KLM-KLP) and in the twin (DKLM-DKLP) versions.
For the twin version, a built in clapet valve in the delivery port is also included, to avoid water recirculation when the unit is idle. A blind flange is also supplied as a standard, to be applied during maintenance of one of the two motors.
The twin version gives the possibility of alternating the operation of the pumps when a backup unit is required, or to have the two pumps operating simultaneously.

Construction Features Of The Motor

External ventilation cooling, closed, asynchronous type, with four poles for the KLM and DKLM versions, and two poles for the KLP and DKLP versions.
Rotor running on permanently lubricated ball bearings, oversized to ensure low noise and durability.
Standard built-in thermo-amperometric protection. Capacitor permanently fitted on single phase versions.
For the protection of the three-phase motor, we recommend the use of remote overload cut-outs, in compliance with current local regulations.
Construction according to CEI 2-3.
Protection class: IP 55
Insulation class: F
Standard voltage: single-phase 220-240 V, 50 Hz - three-phase 230/400 V, 50 Hz

The DAB DKLP 50-1600/BQQE In-Line Circulator Twin Pump IE3 - 3x230/400v - Three Phase - 16m Head is a Circulator Pump item. Voltage for this item is 400V. The maximum head for this pump is 16m. This is a Surface Mounted pump which can be suitable when the pump can sit in a dry, accessible location and draw liquid in via a suction pipe or hose.

Product Applications

An in-line circulator pump engineered for circulating hot or cold water. This product is manufactured by Dab. Appropriate for installation directly onto the pipework of civil and industrial heating, air conditioning, refrigeration and sanitary water systems.

Construction Features Of The Pump

Pump body and motor support in Cast Iron.
PN 10 flanged suction and delivery ports with threaded holes for control manometers. To make replacement in existing systems easier, the pump can accept PN 6 counter flanges.
Technopolymer impeller. Carbon/ceramic mechanical seal.
The pumps are available both in the single (KLM-KLP) and in the twin (DKLM-DKLP) versions.
For the twin version, a built in clapet valve in the delivery port is also included, to avoid water recirculation when the unit is idle. A blind flange is also supplied as a standard, to be applied during maintenance of one of the two motors.
The twin version gives the possibility of alternating the operation of the pumps when a backup unit is required, or to have the two pumps operating simultaneously.

Construction Features Of The Motor

External ventilation cooling, closed, asynchronous type, with four poles for the KLM and DKLM versions, and two poles for the KLP and DKLP versions.
Rotor running on permanently lubricated ball bearings, oversized to ensure low noise and durability.
Standard built-in thermo-amperometric protection. Capacitor permanently fitted on single phase versions.
For the protection of the three-phase motor, we recommend the use of remote overload cut-outs, in compliance with current local regulations.
Construction according to CEI 2-3.
Protection class: IP 55
Insulation class: F
Standard voltage: single-phase 220-240 V, 50 Hz - three-phase 230/400 V, 50 Hz

The DAB KLP 50-1600/BQQE In-Line Circulator Pump IE3 - 3x230/400v - Three Phase - 16m Head is a Circulator Pump item. Voltage for this item is 400V. The maximum head for this pump is 16m. This is a Surface Mounted pump which can be suitable when the pump can sit in a dry, accessible location and draw liquid in via a suction pipe or hose.

Product Applications

An in-line circulator pump engineered for circulating hot or cold water. This product is manufactured by Dab. Appropriate for installation directly onto the pipework of civil and industrial heating, air conditioning, refrigeration and sanitary water systems.

Construction Features Of The Pump

Pump body and motor support in Cast Iron.
PN 10 flanged suction and delivery ports with threaded holes for control manometers. To make replacement in existing systems easier, the pump can accept PN 6 counter flanges.
Technopolymer impeller. Carbon/ceramic mechanical seal.
The pumps are available both in the single (KLM-KLP) and in the twin (DKLM-DKLP) versions.
For the twin version, a built in clapet valve in the delivery port is also included, to avoid water recirculation when the unit is idle. A blind flange is also supplied as a standard, to be applied during maintenance of one of the two motors.
The twin version gives the possibility of alternating the operation of the pumps when a backup unit is required, or to have the two pumps operating simultaneously.

Construction Features Of The Motor

External ventilation cooling, closed, asynchronous type, with four poles for the KLM and DKLM versions, and two poles for the KLP and DKLP versions.
Rotor running on permanently lubricated ball bearings, oversized to ensure low noise and durability.
Standard built-in thermo-amperometric protection. Capacitor permanently fitted on single phase versions.
For the protection of the three-phase motor, we recommend the use of remote overload cut-outs, in compliance with current local regulations.
Construction according to CEI 2-3.
Protection class: IP 55
Insulation class: F
Standard voltage: single-phase 220-240 V, 50 Hz - three-phase 230/400 V, 50 Hz

The DAB KLP 40-1600/BQQE In-Line Circulator Pump IE3 - 3x230/400v - Three Phase - 16m Head is a Circulator Pump item. Voltage for this item is 400V. The maximum head for this pump is 16m. This is a Surface Mounted pump which can be suitable when the pump can sit in a dry, accessible location and draw liquid in via a suction pipe or hose.

Product Applications

An in-line circulator pump engineered for circulating hot or cold water. This product is manufactured by Dab. Appropriate for installation directly onto the pipework of civil and industrial heating, air conditioning, refrigeration and sanitary water systems.

Construction Features Of The Pump

Pump body and motor support in Cast Iron.
PN 10 flanged suction and delivery ports with threaded holes for control manometers. To make replacement in existing systems easier, the pump can accept PN 6 counter flanges.
Technopolymer impeller. Carbon/ceramic mechanical seal.
The pumps are available both in the single (KLM-KLP) and in the twin (DKLM-DKLP) versions.
For the twin version, a built in clapet valve in the delivery port is also included, to avoid water recirculation when the unit is idle. A blind flange is also supplied as a standard, to be applied during maintenance of one of the two motors.
The twin version gives the possibility of alternating the operation of the pumps when a backup unit is required, or to have the two pumps operating simultaneously.

Construction Features Of The Motor

External ventilation cooling, closed, asynchronous type, with four poles for the KLM and DKLM versions, and two poles for the KLP and DKLP versions.
Rotor running on permanently lubricated ball bearings, oversized to ensure low noise and durability.
Standard built-in thermo-amperometric protection. Capacitor permanently fitted on single phase versions.
For the protection of the three-phase motor, we recommend the use of remote overload cut-outs, in compliance with current local regulations.
Construction according to CEI 2-3.
Protection class: IP 55
Insulation class: F
Standard voltage: single-phase 220-240 V, 50 Hz - three-phase 230/400 V, 50 Hz

The DAB KLP 40-1200/BQQE In-Line Circulator Pump IE3 - 3x230/400v - Three Phase - 12m Head is a Circulator Pump item. Voltage for this item is 400V. The maximum head for this pump is 12m. This is a Surface Mounted pump which can be suitable when the pump can sit in a dry, accessible location and draw liquid in via a suction pipe or hose.