By Range
-
The Calpeda MXH series is a compact, horizontal ...
-
Calpeda MXHM pumps take the MXH design further, ...
-
The Calpeda NM range is all about simplicity an ...
-
The Ebara 2CDX range is built for when you need ...
-
Compact, efficient, and tough. The EBARA 2CDXM ...
-
The Ebara 3M ra ...
-
The Ebara GS r ...
-
The Ebara CD range is your go-to for reliable, ...
-
The Ebara CDM range takes the CD series up a no ...
-
The Ebara CDX range is designed for high-demand ...
-
Compact, horizontal, multistage end-suction pum ...
-
The CME series takes the CM design and adds eve ...
-
Single-stage, horizontal end-suction pumps desi ...
-
The NBE pumps are NB siblings with extended per ...
-
NK pumps are single-stage, horizontal end-sucti ...
-
The NKE series builds on the NK with stainless ...
-
The Lowara BGM ...
Featured End Suction Pumps
Browse the featured products, hand picked by the Pump Sales Direct Team
-
98394937
Grundfos - CME 1-5 A-R-I-E-AQQE U-A-D-N Horizontal Multi-Stage Booster Pump - 230V - Single Phase - 34 Ltr/min.CME is a reliable, quite and compact horizontal end-suction pump with integrated frequency converter and intelligent features. The modular pump design makes it easy to make customised solutions.
£2,108.40 RRP £1,475.88 £1,229.90
In stock
Free Standard Delivery
-
98394877
Grundfos - CME 3-2 A-R-I-E-AQQE S-A-D-N Horizontal Multi-Stage Booster Pump - 400V - Three Phase - 62 Ltr/min.CME is a reliable, quite and compact horizontal end-suction pump with integrated frequency converter and intelligent features. The modular pump design makes it easy to make customised solutions.
£2,178.00 RRP £1,568.16 £1,306.80
In stock
Free Standard Delivery
-
98395195
Grundfos - CME 5-2 A-R-I-E-AQQE S-A-D-N Horizontal Multi-Stage Booster Pump - 400V - Three Phase - 94 Ltr/min. - Stainless SteelCME 5-2 A-R-I-E-AQQE S-A-D-N
space-efficient, dependable, horizontal, multi-stage, end-suction centrifugal pump unit with axial suction port and radial discharge port. Pump materials in contact with the liquid are in Stainless Steel. The mechanical shaft seal is a specially engineered, unbalanced O-ring seal. All pipework connection is via internal Whitworth pipe threads, Rp (ISO 7/1). The pump is equipped with a 3-phase, fan-cooled, permanent-magnet, synchronous motor. The motor efficiency is classified as IE5 in accordance with IEC 60034-30-2. The motor includes a frequency converter and PI controller in the motor terminal box. This enables continuously variable control of the motor speed, which again enables adaptation of the performance to a given requirement. An operating panel on the motor terminal box enables setting of required setpoint as well as setting of pump to "Min." or "Max." operation or to "Stop". The Grundfos Eye indicator on the operating panel provides visual indication of pump status:
Communication with the pump is possible by means of Grundfos GO Remote (accessory). The remote control enables further settings as well as reading out of a number of parameters such as "Actual value", "Speed", "Power input" and total "Power consumption". The terminal box holds terminals for these connections:- "Alarm": Motor has stopped (flashing red indicator lights)
- "Warning": Motor is still running (rotating yellow indicator lights) or has stopped (permanently yellow indicator lights)
- "Power on": Motor is running (rotating green indicator lights) or not running (permanently green indicator lights)
- interface for Grundfos CIM fieldbus module
- GENIbus connection
- two signal-relay outputs (potential-free contacts)
- 24 V voltage supply for sensors
- Grundfos Digital Sensor input and output
- one configurable digital input or open-collector output
- 5 V voltage supply to potentiometer and sensor
- two analog inputs, 0(4)-20 mA, 0-5 V, 0-10 V, 0.5 - 3.5 V
- one dedicated digital input
Suitable for: Commercial heating, Commercial air conditioning, Commercial water pressure boosting, District heating, Domestic water pressure boosting, Industrial cleaning process, Industrial heating, Industrial water supply and transfer, Desalination, Water distribution, Irrigation, Community water supply
£2,373.60 RRP £1,708.99 £1,424.16
In stock
Free Standard Delivery
-
101861330
Lowara - ESHS 40-200/55/P25VSSA Centrifugal End Suction Pump - 400V - Three Phase -Lowara pumps, drives and packaged solutions like pressure booster sets and wastewater lifting stations are all developed with low life cycle cost in mind. This product is manufactured by Lowara. That means durable, high efficient, easy to install and service products with a long service life.
The Lowara ESHS 40-200/55/P25VSSA Centrifugal End Suction Pump - 400v - Three Phase - is a End Suction Pump item. Voltage for this item is 400V.
£3,538.92 £2,949.10
In stock
Free Standard Delivery
-
92889533
Grundfos - CM 3-6 A-R-I-E-AQQE C1-A-A-N Horizontal Booster Pump - 230V - Single Phase - Stainless SteelCM 3-6 A-R-I-E-AQQE C1-A-A-N
space-efficient, dependable, horizontal, multi-stage, end-suction centrifugal pump unit with axial suction port and radial discharge port. Pump materials in contact with the liquid are in Stainless Steel. The mechanical shaft seal is a specially engineered, unbalanced O-ring seal. All pipework connection is via internal Whitworth pipe threads, Rp (ISO 7/1). The pump is equipped with a 1-phase, foot-mounted, fan-cooled asynchronous motor.
Suitable for: Commercial heating, Commercial air conditioning, Commercial water pressure boosting, District heating, Domestic water pressure boosting, Industrial cleaning process, Industrial heating, Industrial water supply and transfer, Desalination, Water distribution, Irrigation, Community water supply
£1,362.00 RRP £980.64 £817.20
Out Of Stock
Free Standard Delivery
-
60400383000
Calpeda - NM 40/12A/B Centrifugal Pump - Single Impeller - 415V - 700 Ltr/min - 22m Head- NM: Single-impeller configuration
- NMD: Twin impellers mounted back-to-back, designed to balance axial thrust
- Connections: ISO 228/1 (BS 2779) threaded ports
- NM / NMD: Cast Iron pump casing and lantern bracket
- B-NM / B-NMD: Bronze pump casing and lantern bracket (pumps are delivered fully painted)
Calpeda NM and NMD pumps are single (NM) and dual (NMD) impeller pumps, with threaded connections. This product is manufactured by Calpeda. The range is manufactured from Cast Iron, with standard seals fitted being Carbon - Ceramic - Nitrile
Typical Applications include: -
- Clean liquids without abrasives, which are non-aggressive for the pump materials (solids content up to 0.2%).
- Water supply.
- Heating, air conditioning, cooling and circulation plants.
- Civil and industrial applications.
- Fire fighting applications.
- Irrigation.The Calpeda NM 40/12A/B Centrifugal Pump - Single Impeller - 415v is a Centrifugal Pump item. Voltage for this item is 415V. It has an actual flow rate of 700 Ltr/min. The maximum head for this pump is 22m. This is a Surface Mounted pump which can be suitable when the pump can sit in a dry, accessible location and draw liquid in via a suction pipe or hose.
£997.10 £830.92
In stock
Free Standard Delivery
-
60400682000
Calpeda - NM 40/20 AA Centrifugsal Pump - Single Impeller - 415V - 450 Ltr/min - 55m Head- NM: Single-impeller configuration
- NMD: Twin impellers mounted back-to-back, designed to balance axial thrust
- Connections: ISO 228/1 (BS 2779) threaded ports
- NM / NMD: Cast Iron pump casing and lantern bracket
- B-NM / B-NMD: Bronze pump casing and lantern bracket (pumps are delivered fully painted)
Calpeda NM and NMD pumps are single (NM) and dual (NMD) impeller pumps, with threaded connections. This product is manufactured by Calpeda. The range is manufactured from Cast Iron, with standard seals fitted being Carbon - Ceramic - Nitrile
Typical Applications include: -
- Clean liquids without abrasives, which are non-aggressive for the pump materials (solids content up to 0.2%).
- Water supply.
- Heating, air conditioning, cooling and circulation plants.
- Civil and industrial applications.
- Fire fighting applications.
- Irrigation.The Calpeda NM 40/20 AA Centrifugsal Pump - Single Impeller - 415v is a Centrifugal Pump item. Voltage for this item is 415V. It has an actual flow rate of 450 Ltr/min. The maximum head for this pump is 55m. This is a Surface Mounted pump which can be suitable when the pump can sit in a dry, accessible location and draw liquid in via a suction pipe or hose.
£2,229.83 £1,858.19
In stock
Free Standard Delivery
-
CA-NM 40-20B-A
Calpeda - NM 40/20B/A Centrifugal Pump - Single Impeller - 415V - 630 Ltr/min - 50m Head- NM: Single-impeller configuration
- NMD: Twin impellers mounted back-to-back, designed to balance axial thrust
- Connections: ISO 228/1 (BS 2779) threaded ports
- NM / NMD: Cast Iron pump casing and lantern bracket
- B-NM / B-NMD: Bronze pump casing and lantern bracket (pumps are delivered fully painted)
Calpeda NM and NMD pumps are single (NM) and dual (NMD) impeller pumps, with threaded connections. This product is manufactured by Calpeda. The range is manufactured from Cast Iron, with standard seals fitted being Carbon - Ceramic - Nitrile
Typical Applications include: -
- Clean liquids without abrasives, which are non-aggressive for the pump materials (solids content up to 0.2%).
- Water supply.
- Heating, air conditioning, cooling and circulation plants.
- Civil and industrial applications.
- Fire fighting applications.
- Irrigation.The Calpeda NM 40/20B/A Centrifugal Pump - Single Impeller - 415v is a Centrifugal Pump item. Voltage for this item is 415V. It has an actual flow rate of 630 Ltr/min. The maximum head for this pump is 50m. This is a Surface Mounted pump which can be suitable when the pump can sit in a dry, accessible location and draw liquid in via a suction pipe or hose.
£1,704.78 £1,420.65
In stock
Free Standard Delivery
-
60400923000
Calpeda - NM 50/12A/B Centrifugal Pump - 4KW - 3 Phase - 415V - 1301 Ltr/min - 24m HeadCalpeda NM is a range of close-coupled centrifugal pumps with screwed (threaded) connections. The electric motor with extended shaft is directly connected to the pump, creating a compact unit suitable for clean-liquid circulation and general water supply duties.
£1,437.29 £1,197.74
In stock
Free Standard Delivery
60401604000
Calpeda - NM 65/16B/C Centrifugal Pump - 11KW - 415VCalpeda NM is a range of close-coupled centrifugal pumps with screwed (threaded) connections. The electric motor with extended shaft is directly connected to the pump, creating a compact unit suitable for clean-liquid circulation and general water supply duties.
£3,039.50 £2,532.92
In stock
Free Standard Delivery
60110010000
Calpeda - NMM 1/AE Centrifugal Pump - 240V - 70 Ltr/min - 22m HeadCalpeda NMM is the single-phase version within the NM family of close-coupled centrifugal pumps with screwed (threaded) connections. NMM variants are supplied with a single-phase 230 V motor and thermal protection, making them suitable for sites where three-phase power is not available.
£329.87 £274.89
In stock
Free Standard Delivery
60120040000
Calpeda - NMM 2 A/A Centrifugal Pump - 230V - 240V - 100 Ltr/min - 33.5m HeadCalpeda NMM is the single-phase version within the NM family of close-coupled centrifugal pumps with screwed (threaded) connections. NMM variants are supplied with a single-phase 230 V motor and thermal protection, making them suitable for sites where three-phase power is not available.
£431.62 £359.68
In stock
Free Standard Delivery
CA-MXH 404-A
Calpeda - MXH 404/A Horizontal Multistage Pump - 3 Phase - 133 Ltr/min - 44.5m HeadThe Calpeda MXH 404/A Horizontal Multistage Pump - 3 Phase is a Multistage Pump item. This product is manufactured by Calpeda. It has an actual flow rate of 133 Ltr/min. The maximum head for this pump is 44.5m. This is a Surface Mounted pump which can be suitable when the pump can sit in a dry, accessible location and draw liquid in via a suction pipe or hose.
Calpeda MXH is a range of horizontal multi-stage close-coupled pumps in chrome-nickel Stainless Steel, designed for compact installations and efficient pressure boosting. The range features a robust, single-piece construction (including a barrel casing), with front suction and radial delivery at the top.
£880.22 RRP £660.17 £550.14
In stock
Free Standard Delivery
CA-MXH 406
Calpeda - MXH 406 Horizontal Multistage Pump - 3 Phase - 400V - 133 Ltr/min - 68.5m HeadThe Calpeda MXH 406 Horizontal Multistage Pump - 3 Phase - 400v is a Multistage Pump item. This product is manufactured by Calpeda. Voltage for this item is 400V. It has an actual flow rate of 133 Ltr/min. The maximum head for this pump is 68.5m. This is a Surface Mounted pump which can be suitable when the pump can sit in a dry, accessible location and draw liquid in via a suction pipe or hose.
Calpeda MXH is a range of horizontal multi-stage close-coupled pumps in chrome-nickel Stainless Steel, designed for compact installations and efficient pressure boosting. The range features a robust, single-piece construction (including a barrel casing), with front suction and radial delivery at the top.
£1,255.46 RRP £941.60 £784.67
In stock
Free Standard Delivery
CA-MXH 804
Calpeda - MXH 804 Horizontal Multistage Pump - 3 Phase - 216 Ltr/min - 48m HeadThe Calpeda MXH 804 Horizontal Multistage Pump - 3 Phase is a Multistage Pump item. This product is manufactured by Calpeda. It has an actual flow rate of 216 Ltr/min. The maximum head for this pump is 48m. This is a Surface Mounted pump which can be suitable when the pump can sit in a dry, accessible location and draw liquid in via a suction pipe or hose.
Calpeda MXH is a range of horizontal multi-stage close-coupled pumps in chrome-nickel Stainless Steel, designed for compact installations and efficient pressure boosting. The range features a robust, single-piece construction (including a barrel casing), with front suction and radial delivery at the top.
£1,216.03 RRP £912.02 £760.02
In stock
Free Standard Delivery
62231031000
Calpeda - MXH 403/A Horizontal Multistage Pump - 3 Phase - 400V - 133 Ltr/min - 33m HeadThe Calpeda MXH 403/A Horizontal Multistage Pump - 3 Phase - 400v is a Multistage Pump item. This product is manufactured by Calpeda. Voltage for this item is 400V. It has an actual flow rate of 133 Ltr/min. The maximum head for this pump is 33m. This is a Surface Mounted pump which can be suitable when the pump can sit in a dry, accessible location and draw liquid in via a suction pipe or hose.
Calpeda MXH is a range of horizontal multi-stage close-coupled pumps in chrome-nickel Stainless Steel, designed for compact installations and efficient pressure boosting. The range features a robust, single-piece construction (including a barrel casing), with front suction and radial delivery at the top.
£812.81 RRP £609.61 £508.01
In stock
Free Standard Delivery
End Suction Pumps
End suction pumps are a simple and versatile type of centrifugal pump that are widely used anywhere a dependable flow of water or liquid is needed. Compact and cost-effective, they’re built around a single impeller that draws liquid in from one side and discharges it from the top, making them easy to install and maintain.
You’ll find end suction pumps across countless applications, from heating and cooling systems to irrigation, water transfer, and general pressure boosting. They’re designed to handle everything from clean water to light industrial liquids, offering reliable performance with minimal maintenance.
At Pumpify, we supply an extensive range of end suction pumps from leading brands, including Calpeda, Ebara, Grundfos, Lowara, and more. Whether you’re replacing an existing unit or designing a new system, our selection covers close-coupled and frame-mounted models to suit both domestic and commercial use.