The new Lowara e-HM range are threaded horizontal multi-stage pumps with IE3 motors (complying with regulation EC 640/2009)

The e-HM range are high efficiency horizontal multistage pumps frequently applied in water supply and pressure boosting, particularly in larger residential installations. This product is manufactured by Lowara.

The Lowara 5HM09S15T5RVBE e-HM Stainless Steel Horizontal Multi-Stage Pump - 400v - 3 Phase is a Multistage pump. Voltage for this item is 400V. It has an actual flow rate of 142 Ltr/min. The maximum head for this pump is 60m. This is a Surface Mounted pump which can be suitable when the pump can sit in a dry, accessible location and draw liquid in via a suction pipe or hose.

The new Lowara e-HM range are threaded horizontal multi-stage pumps with IE3 motors (complying with regulation EC 640/2009)

The e-HM range are high efficiency horizontal multistage pumps frequently applied in water supply and pressure boosting, particularly in larger residential installations. This product is manufactured by Lowara.

The Lowara 5HM10S15T5RVBE e-HM Stainless Steel Horizontal Multi-Stage Pump - 400v - 3 Phase is a Multistage pump. Voltage for this item is 400V. It has an actual flow rate of 142 Ltr/min. The maximum head for this pump is 75m. This is a Surface Mounted pump which can be suitable when the pump can sit in a dry, accessible location and draw liquid in via a suction pipe or hose.

Silent Operation:

High efficiency and thick sheet metal pump body reduces the noise of water circulating inside the pump. This product is manufactured by Lowara. Lower speeds on a speed - controlled pump also mean near silent running without compromising on demand or performance.

No Water Hammer:

Water hammer is the 'bang' sound in the pipes when a pump stops suddenly. A speed-controlled pump stops slowly eliminating 'water hammer' noise while preserving the system.

Stable Temperature:

In an on/off system the cold water is stored in a tank and is slowly heated to the room temperature. In constant pressure systems, fresh cold water is pumped into the system as soon as you open a tap, keeping the water at your desired temperature at all times.

Energy Saving:

A pump uses most energy when it's at full speed. Less speed means less energy. The relationship between changes in speed and changes in head, flow and power consumption comes under the affinity law. If you reduce the speed by 50%, power

The Lowara 10HM03ST5RVBE (e-HM) Stainless Steel Horizontal Multi-Stage Pump - 400v - 3 Phase is a Multistage pump. Voltage for this item is 400V. It has an actual flow rate of 234 Ltr/min. The maximum head for this pump is 71.8m. This is a Surface Mounted pump which can be suitable when the pump can sit in a dry, accessible location and draw liquid in via a suction pipe or hose.

Silent Operation:

High efficiency and thick sheet metal pump body reduces the noise of water circulating inside the pump. This product is manufactured by Lowara. Lower speeds on a speed - controlled pump also mean near silent running without compromising on demand or performance.

No Water Hammer:

Water hammer is the 'bang' sound in the pipes when a pump stops suddenly. A speed-controlled pump stops slowly eliminating 'water hammer' noise while preserving the system.

Stable Temperature:

In an on/off system the cold water is stored in a tank and is slowly heated to the room temperature. In constant pressure systems, fresh cold water is pumped into the system as soon as you open a tap, keeping the water at your desired temperature at all times.

Energy Saving:

A pump uses most energy when it's at full speed. Less speed means less energy. The relationship between changes in speed and changes in head, flow and power consumption comes under the affinity law. If you reduce the speed by 50%, power

The Lowara 10HM05S22T5RVBE (e-HM) Stainless Steel Horizontal Multi-Stage Pump - 400v - 3 Phase is a Multistage pump. Voltage for this item is 400V. It has an actual flow rate of 234 Ltr/min. The maximum head for this pump is 106.3m. This is a Surface Mounted pump which can be suitable when the pump can sit in a dry, accessible location and draw liquid in via a suction pipe or hose.

Silent Operation:

High efficiency and thick sheet metal pump body reduces the noise of water circulating inside the pump. This product is manufactured by Lowara. Lower speeds on a speed - controlled pump also mean near silent running without compromising on demand or performance.

No Water Hammer:

Water hammer is the 'bang' sound in the pipes when a pump stops suddenly. A speed-controlled pump stops slowly eliminating 'water hammer' noise while preserving the system.

Stable Temperature:

In an on/off system the cold water is stored in a tank and is slowly heated to the room temperature. In constant pressure systems, fresh cold water is pumped into the system as soon as you open a tap, keeping the water at your desired temperature at all times.

Energy Saving:

A pump uses most energy when it's at full speed. Less speed means less energy. The relationship between changes in speed and changes in head, flow and power consumption comes under the affinity law. If you reduce the speed by 50%, power

The Lowara 10HM06S22T5RVBE (e-HM) Stainless Steel Horizontal Multi-Stage Pump - 400v - 3 Phase is a Multistage pump. Voltage for this item is 400V. It has an actual flow rate of 234 Ltr/min. The maximum head for this pump is 118m. This is a Surface Mounted pump which can be suitable when the pump can sit in a dry, accessible location and draw liquid in via a suction pipe or hose.

Three phase, WRAS approved horizontal multistage pump with 3 impellers and a 1 1/2" threaded discharge port.

The new Lowara e-HM range are threaded horizontal multi-stage pumps with IE3 motors (complying with regulation EC 640/2009)

The e-HM range are high efficiency horizontal multistage pumps frequently applied in water supply and pressure boosting, particularly in larger residential installations. This product is manufactured by Lowara.

The Lowara 5HM05S07M5HVBE e-HM Stainless Steel Horizontal Multi-Stage Pump - 230v - Single Phase is a Multistage pump. Voltage for this item is 230V. It has an actual flow rate of 150 Ltr/min. The maximum head for this pump is 37m. This is a Surface Mounted pump which can be suitable when the pump can sit in a dry, accessible location and draw liquid in via a suction pipe or hose.

The new Lowara e-HM range are threaded horizontal multi-stage pumps with IE3 motors (complying with regulation EC 640/2009)

The e-HM range are high efficiency horizontal multistage pumps frequently applied in water supply and pressure boosting, particularly in larger residential installations. This product is manufactured by Lowara.

The Lowara 5HM06S07M5HVBE e-HM Stainless Steel Horizontal Multi-Stage Pump - 230v - Single Phase is a Multistage Pump item. Voltage for this item is 230V. It has an actual flow rate of 150 Ltr/min. The maximum head for this pump is 44m. This is a Surface Mounted pump which can be suitable when the pump can sit in a dry, accessible location and draw liquid in via a suction pipe or hose.

The Ebara - 2 CDXM 70/10 Centrifugal Pump - Single Phase - 230V is a Twin impeller centrifugal pump with hydraulics in AISI 304 and AISI 316 Stainless Steel, with radial impeller, with hydraulics entirely in pressed AISI 304 or AISI 316 (L version).
The double impeller makes for a wider performance range than the single-impeller version.
The components of the 2 CDX(L) electric pump are obtained through the renowned hydroforming process, which guarantees sturdiness, hydraulic efficiency and reliability.
The process uses a high-pressure fluid (up to 1200 Bar.) to form the metal.
The hydraulic fluid, in our case water, with increasing pressure pushes the Stainless Steel to copy the shapes of the template until it comes into contact with the internal walls of the matrix that forms the mould.
This exclusive configuration, which combines the power of a press with the force of water, has significant advantages over traditional processes:
Perfectly smooth shape
Highly smooth running
No welding points
These features guarantee high corrosion resistance, High efficiency, with performance of over 80% and low leakage.
2 CDX(L) electric pumps, thanks to their small size, can be positioned even in narrow or difficult to reach spaces.
The Versatility, of these electric pumps is due to the different types of mechanical seals that can be applied. For further technical information see the datasheet

Suitability:

• Domestic pressurisation
• Small-scale garden irrigation
• Washing
• Water treatment
• Cooling towers
• Handling of clean water in general

The Ebara - 2 CDX 70/10 Centrifugal Pump - Three Phase - 400V is a Twin impeller centrifugal pump with hydraulics in AISI 304 and AISI 316 Stainless Steel, with radial impeller, with hydraulics entirely in pressed AISI 304 or AISI 316 (L version).
The double impeller makes for a wider performance range than the single-impeller version.
The components of the 2 CDX(L) electric pump are obtained through the renowned hydroforming process, which guarantees sturdiness, hydraulic efficiency and reliability.
The process uses a high-pressure fluid (up to 1200 Bar.) to form the metal.
The hydraulic fluid, in our case water, with increasing pressure pushes the Stainless Steel to copy the shapes of the template until it comes into contact with the internal walls of the matrix that forms the mould.
This exclusive configuration, which combines the power of a press with the force of water, has significant advantages over traditional processes:
Perfectly smooth shape
Highly smooth running
No welding points
These features guarantee high corrosion resistance, High efficiency, with performance of over 80% and low leakage.
2 CDX(L) electric pumps, thanks to their small size, can be positioned even in narrow or difficult to reach spaces.
The Versatility, of these electric pumps is due to the different types of mechanical seals that can be applied. For further technical information see the datasheet

Suitability:

• Domestic pressurisation
• Small-scale garden irrigation
• Washing
• Water treatment
• Cooling towers
• Handling of clean water in general

The Ebara - 2 CDXM 70/12 Centrifugal Pump - Single Phase - 230V is a Twin impeller centrifugal pump with hydraulics in AISI 304 and AISI 316 Stainless Steel, with radial impeller, with hydraulics entirely in pressed AISI 304 or AISI 316 (L version).
The double impeller makes for a wider performance range than the single-impeller version.
The components of the 2 CDX(L) electric pump are obtained through the renowned hydroforming process, which guarantees sturdiness, hydraulic efficiency and reliability.
The process uses a high-pressure fluid (up to 1200 Bar.) to form the metal.
The hydraulic fluid, in our case water, with increasing pressure pushes the Stainless Steel to copy the shapes of the template until it comes into contact with the internal walls of the matrix that forms the mould.
This exclusive configuration, which combines the power of a press with the force of water, has significant advantages over traditional processes:
Perfectly smooth shape
Highly smooth running
No welding points
These features guarantee high corrosion resistance, High efficiency, with performance of over 80% and low leakage.
2 CDX(L) electric pumps, thanks to their small size, can be positioned even in narrow or difficult to reach spaces.
The Versatility, of these electric pumps is due to the different types of mechanical seals that can be applied. For further technical information see the datasheet

Suitability:

• Domestic pressurisation
• Small-scale garden irrigation
• Washing
• Water treatment
• Cooling towers
• Handling of clean water in general

The Ebara - 2 CDX 70/12 Centrifugal Pump - Three Phase - 400V is a Twin impeller centrifugal pump with hydraulics in AISI 304 and AISI 316 Stainless Steel, with radial impeller, with hydraulics entirely in pressed AISI 304 or AISI 316 (L version).
The double impeller makes for a wider performance range than the single-impeller version.
The components of the 2 CDX(L) electric pump are obtained through the renowned hydroforming process, which guarantees sturdiness, hydraulic efficiency and reliability.
The process uses a high-pressure fluid (up to 1200 Bar.) to form the metal.
The hydraulic fluid, in our case water, with increasing pressure pushes the Stainless Steel to copy the shapes of the template until it comes into contact with the internal walls of the matrix that forms the mould.
This exclusive configuration, which combines the power of a press with the force of water, has significant advantages over traditional processes:
Perfectly smooth shape
Highly smooth running
No welding points
These features guarantee high corrosion resistance, High efficiency, with performance of over 80% and low leakage.
2 CDX(L) electric pumps, thanks to their small size, can be positioned even in narrow or difficult to reach spaces.
The Versatility, of these electric pumps is due to the different types of mechanical seals that can be applied. For further technical information see the datasheet

Suitability:

• Domestic pressurisation
• Small-scale garden irrigation
• Washing
• Water treatment
• Cooling towers
• Handling of clean water in general

The Ebara - 2 CDX 70/20 Centrifugal Pump - Three Phase - 400V is a Twin impeller centrifugal pump with hydraulics in AISI 304 and AISI 316 Stainless Steel, with radial impeller, with hydraulics entirely in pressed AISI 304 or AISI 316 (L version).
The double impeller makes for a wider performance range than the single-impeller version.
The components of the 2 CDX(L) electric pump are obtained through the renowned hydroforming process, which guarantees sturdiness, hydraulic efficiency and reliability.
The process uses a high-pressure fluid (up to 1200 Bar.) to form the metal.
The hydraulic fluid, in our case water, with increasing pressure pushes the Stainless Steel to copy the shapes of the template until it comes into contact with the internal walls of the matrix that forms the mould.
This exclusive configuration, which combines the power of a press with the force of water, has significant advantages over traditional processes:
Perfectly smooth shape
Highly smooth running
No welding points
These features guarantee high corrosion resistance, High efficiency, with performance of over 80% and low leakage.
2 CDX(L) electric pumps, thanks to their small size, can be positioned even in narrow or difficult to reach spaces.
The Versatility, of these electric pumps is due to the different types of mechanical seals that can be applied. For further technical information see the datasheet

Suitability:

• Domestic pressurisation
• Small-scale garden irrigation
• Washing
• Water treatment
• Cooling towers
• Handling of clean water in general

The Ebara - CDXM 70/05 Centrifugal Pump - Single Phase - 90 Ltr/min - 230 V is a Single impeller centrifugal pump with hydraulics in AISI 304 and AISI 316 stainless steel, with radial impeller, with hydraulics entirely in pressed AISI 304 or AISI 316 (L version), with hydroformed components, which ensure sturdiness, hydraulic efficiency and reliability.

The Ebara - CDX 70/05 Centrifugal Pump - Three Phase - 400 V is a Single impeller centrifugal pump with hydraulics in AISI 304 and AISI 316 stainless steel, with radial impeller, with hydraulics entirely in pressed AISI 304 or AISI 316 (L version), with hydroformed components, which ensure sturdiness, hydraulic efficiency and reliability. The hydroforming process uses a high-pressure fluid (up to 1200 bar) to form the metal.

The Ebara - CDXM/A 70/07 Centrifugal Pump - Single Phase - 80 Ltr/min - 230 V is a Single impeller centrifugal pump with hydraulics in AISI 304 and AISI 316 stainless steel, with radial impeller, with hydraulics entirely in pressed AISI 304 or AISI 316 (L version), with hydroformed components, which ensure sturdiness, hydraulic efficiency and reliability.