The Ebara CD are surface centrifugal electric pumps entirely made of AISI 304 Stainless Steel.
CD model is suitable for different uses ranging from domestic pressurisation to small irrigation, from water treatment plants to evaporative towers; therefore for handling clean water in general.
The standard mechanical seal is made of Ceramic/Carbon/NBR, but several special seals are available.

PUMP TECHNICAL DATA
• Liquid temperature:
-5°C ÷ +60°C (from -15°C to +110°C for H,
HS, HW and HSW versions)
• Total head from 36.8 to 12.5 m
• Flow rate 1.2 to 15 m3/h
• Hydraulic efficiency index MEI > 0.4
• IE3 high efficiency motors starting from 0.75kW

Ebara CD are surface centrifugal electric pumps entirely made of AISI 304 Stainless Steel.
CD model is suitable for different uses ranging from domestic pressurisation to small irrigation, from water treatment plants to evaporative towers; therefore for handling clean water in general.
The standard mechanical seal is made of Ceramic/Carbon/NBR, but several special seals are available.

PUMP TECHNICAL DATA
• Liquid temperature:
-5°C ÷ +60°C (from -15°C to +110°C for H,
HS, HW and HSW versions)
• Total head from 36.8 to 12.5 m
• Flow rate 1.2 to 15 m3/h
• Hydraulic efficiency index MEI > 0.4
• IE3 high efficiency motors starting from 0.75kW

The Ebara CD are surface centrifugal electric pumps entirely made of AISI 304 Stainless Steel.
CD model is suitable for different uses ranging from domestic pressurisation to small irrigation, from water treatment plants to evaporative towers; therefore for handling clean water in general.
The standard mechanical seal is made of Ceramic/Carbon/NBR, but several special seals are available.

PUMP TECHNICAL DATA
• Liquid temperature:
-5°C ÷ +60°C (from -15°C to +110°C for H,
HS, HW and HSW versions)
• Total head from 36.8 to 12.5 m
• Flow rate 1.2 to 15 m3/h
• Hydraulic efficiency index MEI > 0.4
• IE3 high efficiency motors starting from 0.75kW

The Ebara CD are surface centrifugal electric pumps entirely made of AISI 304 Stainless Steel.
CD model is suitable for different uses ranging from domestic pressurisation to small irrigation, from water treatment plants to evaporative towers; therefore for handling clean water in general.
The standard mechanical seal is made of Ceramic/Carbon/NBR, but several special seals are available.

PUMP TECHNICAL DATA
• Liquid temperature:
-5°C ÷ +60°C (from -15°C to +110°C for H,
HS, HW and HSW versions)
• Total head from 36.8 to 12.5 m
• Flow rate 1.2 to 15 m3/h
• Hydraulic efficiency index MEI > 0.4
• IE3 high efficiency motors starting from 0.75kW

The Ebara - 2 CDXM/C 70/15 Centrifugal Pump - Single Phase - 80 Ltr/min. - 230V is a Twin impeller centrifugal pump with hydraulics in AISI 304 and AISI 316 Stainless Steel, with radial impeller, with hydraulics entirely in pressed AISI 304 or AISI 316 (L version).
The double impeller makes for a wider performance range than the single-impeller version.
The components of the 2 CDX(L) electric pump are obtained through the renowned hydroforming process, which guarantees sturdiness, hydraulic efficiency and reliability.
The process uses a high-pressure fluid (up to 1200 Bar.) to form the metal.
The hydraulic fluid, in our case water, with increasing pressure pushes the Stainless Steel to copy the shapes of the template until it comes into contact with the internal walls of the matrix that forms the mould.
This exclusive configuration, which combines the power of a press with the force of water, has significant advantages over traditional processes:
Perfectly smooth shape
Highly smooth running
No welding points
These features guarantee high corrosion resistance, High efficiency, with performance of over 80% and low leakage.
2 CDX(L) electric pumps, thanks to their small size, can be positioned even in narrow or difficult to reach spaces.
The Versatility, of these electric pumps is due to the different types of mechanical seals that can be applied. For further technical information see the datasheet

Suitability:

• Domestic pressurisation
• Small-scale garden irrigation
• Washing
• Water treatment
• Cooling towers
• Handling of clean water in general

The Ebara - 2 CDX/I 70/15 IE3 Centrifugal Pump - Three Phase - 80 Ltr/min. - 400V is a Twin impeller centrifugal pump with hydraulics in AISI 304 and AISI 316 Stainless Steel, with radial impeller, with hydraulics entirely in pressed AISI 304 or AISI 316 (L version).
The double impeller makes for a wider performance range than the single-impeller version.
The components of the 2 CDX(L) electric pump are obtained through the renowned hydroforming process, which guarantees sturdiness, hydraulic efficiency and reliability.
The process uses a high-pressure fluid (up to 1200 Bar.) to form the metal.
The hydraulic fluid, in our case water, with increasing pressure pushes the Stainless Steel to copy the shapes of the template until it comes into contact with the internal walls of the matrix that forms the mould.
This exclusive configuration, which combines the power of a press with the force of water, has significant advantages over traditional processes:
Perfectly smooth shape
Highly smooth running
No welding points
These features guarantee high corrosion resistance, High efficiency, with performance of over 80% and low leakage.
2 CDX(L) electric pumps, thanks to their small size, can be positioned even in narrow or difficult to reach spaces.
The Versatility, of these electric pumps is due to the different types of mechanical seals that can be applied. For further technical information see the datasheet

Suitability:

• Domestic pressurisation
• Small-scale garden irrigation
• Washing
• Water treatment
• Cooling towers
• Handling of clean water in general

The Ebara - 2 CDX/I 120/30 IE3 Centrifugal Pump - Three Phase - 150 Ltr/min. - 400V is a Twin impeller centrifugal pump with hydraulics in AISI 304 and AISI 316 Stainless Steel, with radial impeller, with hydraulics entirely in pressed AISI 304 or AISI 316 (L version).
The double impeller makes for a wider performance range than the single-impeller version.
The components of the 2 CDX(L) electric pump are obtained through the renowned hydroforming process, which guarantees sturdiness, hydraulic efficiency and reliability.
The process uses a high-pressure fluid (up to 1200 Bar.) to form the metal.
The hydraulic fluid, in our case water, with increasing pressure pushes the Stainless Steel to copy the shapes of the template until it comes into contact with the internal walls of the matrix that forms the mould.
This exclusive configuration, which combines the power of a press with the force of water, has significant advantages over traditional processes:
Perfectly smooth shape
Highly smooth running
No welding points
These features guarantee high corrosion resistance, High efficiency, with performance of over 80% and low leakage.
2 CDX(L) electric pumps, thanks to their small size, can be positioned even in narrow or difficult to reach spaces.
The Versatility, of these electric pumps is due to the different types of mechanical seals that can be applied. For further technical information see the datasheet

Suitability:

• Domestic pressurisation
• Small-scale garden irrigation
• Washing
• Water treatment
• Cooling towers
• Handling of clean water in general

The Ebara - GS 80-200 -185/B1 Bareshaft Pump - Motorless - Cast Iron Impeller is a Standardised single-stage cast iron centrifugal pump and electric pump which combines the best technical and performance features in a single solution.

Grundfos - Replacement Wear Ring - D90/D104X10 - For Grundfos - NB(G)/NK(G)

This is a Spares/Kit item, please get in touch for product compatibility.

Grundfos (est. 1945) is a Danish pump manufacturer known for high-efficiency circulators, multistage boosters, borehole and wastewater pumps, plus packaged pressure systems. The range covers HVAC circulation, domestic hot water recirculation, pressure boosting, industrial water transfer and public water management, with strong focus on energy efficiency and intelligent controls.

Grundfos - Kit, Wear Ring D90X10 M5X8 - For Grundfos - NB(G),NK(G)

This is a Spares/Kit item, please get in touch for product compatibility.

Grundfos (est. 1945) is a Danish pump manufacturer known for high-efficiency circulators, multistage boosters, borehole and wastewater pumps, plus packaged pressure systems. The range covers HVAC circulation, domestic hot water recirculation, pressure boosting, industrial water transfer and public water management, with strong focus on energy efficiency and intelligent controls.

Grundfos - Kit, Seal AQQE/V - For Grundfos - CM 10,15,25

This is a Spares/Kit item, please get in touch for product compatibility.

Grundfos (est. 1945) is a Danish pump manufacturer known for high-efficiency circulators, multistage boosters, borehole and wastewater pumps, plus packaged pressure systems. The range covers HVAC circulation, domestic hot water recirculation, pressure boosting, industrial water transfer and public water management, with strong focus on energy efficiency and intelligent controls.

For water supply. This product is manufactured by Calpeda. For clean liquids, without abrasives, which are non-aggressive for Stainless Steel (with appropriate seal materials, on request).

The Calpeda MXHM 402E Horizontal Multi-Stage Close Coupled Pumo - 230v - Single Phase is a Multistage pump. This product is manufactured by Calpeda. Voltage for this item is 230V.

• NM: Single-impeller configuration
• NMD: Twin impellers mounted back-to-back, designed to balance axial thrust
• Connections: ISO 228/1 (BS 2779) threaded ports
• NM / NMD: Cast Iron pump casing and lantern bracket
• B-NM / B-NMD: Bronze pump casing and lantern bracket (pumps are delivered fully painted)

The Calpeda NM32/12DE Close-Coupled Centrifugal Pump - 400v - Three Phase is a Centrifugal Pump item. This product is manufactured by Calpeda. Voltage for this item is 400V.

Calpeda’s NM / NMS series are close-coupled centrifugal pumps complete with electric motor with extended shaft directly connected to the pump up to 30 kW.

They have a new bracket construction for standard motors (stub-shaft construction) from 37 to 75 KW with integrated thrust bearing.

The pump casing comes with axial suction and radial delivery on top, main dimensions and performance according to EN 733.

The Calpeda MXH 202E Horizontal Multi-Stage Sainless Steel Pump - 230v - Single Phase is a Multistage pump. This product is manufactured by Calpeda. Voltage for this item is 400V.