Product Applications

Hot or cold water circulation pump with in-line ports, appropriate for installation directly on the pipework of civil and industrial heating, air conditioning, refrigeration, and sanitary water systems.

Construction Includes Of The Pump

Pump body and motor support in Cast Iron. This product is manufactured by Dab. PN 10 flanged suction and delivery ports with threaded holes for control manometers. To make replacement in existing systems easier, the pump can accept PN 6 counter flanges.
Technopolymer impeller. Carbon/ceramic mechanical seal. The pumps are available both in the single (KLM-KLP) and in the twin (DKLM-DKLP) versions. For the single version a built in clapet valve in the delivery port is also included, to avoid water recirculation when the unit is idle. A blind flange is also supplied as a standard, to be applied during maintenance of one of the two motors. The twin version gives the possibility of alternating the operation of the pumps when a backup unit is required, or to have the two pumps operating simultaneously.

Construction Features Of The Motor

External ventilation cooling, closed, asynchronous type, with four poles for the KLM and DKLM versions, and two poles for the KLP and DKLP versions. Rotor running on permanently lubricated ball bearings, oversized to ensure low noise and durability. Standard built-in thermo-amperometric protection. Capacitor permanently fitted on single phase versions. For the protection of the three-phase motor, we recommend the use of remote overload cut-outs, in compliance with current local regulations. Construction according to CEI 2-3.
Protection class: IP 55
Insulation class: F
Standard voltage: single-phase 220-240V 50Hz.
three-phase 230/400V 50Hz.

The DAB KLP 65-1200 T IE3 In-Line Circulator Pump - 415v - Three Phase - 1534 Ltr/min. is a Circulator Pump item. Voltage for this item is 400V. It has an actual flow rate of 1534 Ltr/min. The maximum head for this pump is 67m. This is a Surface Mounted pump which can be suitable when the pump can sit in a dry, accessible location and draw liquid in via a suction pipe or hose.

Product Applications

Hot or cold water circulation pump with in-line ports, appropriate for installation directly on the pipework of civil and industrial heating, air conditioning, refrigeration, and sanitary water systems.

Construction Includes Of The Pump

Pump body and motor support in Cast Iron.
PN 10 flanged suction and delivery ports with threaded holes for control manometers. This product is manufactured by Dab. To make replacement in existing systems easier, the pump can accept PN 6 counter flanges.
Technopolymer impeller. Carbon/ceramic mechanical seal.
The pumps are available both in the single (KLM-KLP) and in the twin (DKLM-DKLP) versions.
For the twin version a built in clapet valve in the delivery port is also included, to avoid water recirculation when the unit is idle. A blind flange is also supplied as a standard, to be applied during maintenance of one of the two motors.
The twin version gives the possibility of alternating the operation of the pumps when a backup unit is required, or to have the two pumps operating simultaneously.

Construction Features Of The Motor

External ventilation cooling, closed, asynchronous type, with four poles for the KLM and DKLM versions, and two poles for the KLP and DKLP versions.
Rotor running on permanently lubricated ball bearings, oversized to ensure low noise and durability.
Standard built-in thermo-amperometric protection. Capacitor permanently fitted on single phase versions.
For the protection of the three-phase motor, we recommend the use of remote overload cut-outs, in compliance with current local regulations.
Construction according to CEI 2-3.
Protection class: IP 55
Insulation class: F
Standard voltage: single-phase 220-240 V, 50 Hz - three-phase 230/400 V, 50 Hz

The DAB KLM 80-600 T IE3 In-Line Circulator Pump - 415v - Three Phase - 1534 Ltr/min. is a Circulator Pump item. Voltage for this item is 400V. It has an actual flow rate of 1534 Ltr/min. The maximum head for this pump is 67m. This is a Surface Mounted pump which can be suitable when the pump can sit in a dry, accessible location and draw liquid in via a suction pipe or hose.

Product Applications

Hot or cold water circulation pump with in-line ports, appropriate for installation directly on the pipework of civil and industrial heating, air conditioning, refrigeration, and sanitary water systems.

Construction Features Of The Pump

Pump body and motor support in Cast Iron. This product is manufactured by Dab. PN 10 flanged suction and delivery ports with threaded holes for control manometers. To make replacement in existing systems easier, the pump can accept PN 6 counter flanges. Technopolymer impeller. Carbon/ceramic mechanical seal. The pumps are available both in the single (KLM-KLP) and in the twin (DKLM-DKLP) versions. For the twin version a built in clapet valve in the delivery port is also included, to avoid water recirculation when the unit is idle. A blind flange is also supplied as a standard, to be applied during maintenance of one of the two motors. The twin version gives the possibility of alternating the operation of the pumps when a backup unit is required, or to have the two pumps operating simultaneously.

Construction Features Of The Motor

External ventilation cooling, closed, asynchronous type, with four poles for the KLM and DKLM versions, and two poles for the KLP and DKLP versions.Rotor running on permanently lubricated ball bearings, oversized to ensure low noise and durability.Standard built-in thermo-amperometric protection. Capacitor permanently fitted on single phase versions.For the protection of the three-phase motor, we recommend the use of remote overload cut-outs, in compliance with current local regulations.

The DAB DKLP 65-1200 T IE3 Twin Head In-Line Circulator Pump - 415v - Three Phase - 1534 Ltr/min. is a Circulator Pump item. Voltage for this item is 400V. It has an actual flow rate of 1534 Ltr/min. The maximum head for this pump is 67m. This is a Surface Mounted pump which can be suitable when the pump can sit in a dry, accessible location and draw liquid in via a suction pipe or hose.

Product Applications

Hot or cold water circulation pump with in-line ports, appropriate for installation directly on the pipework of civil and industrial heating, air conditioning, refrigeration, and sanitary water systems.

Construction Includes Of The Pump

Pump body and motor support in Cast Iron.
PN 10 flanged suction and delivery ports with threaded holes for control manometers. This product is manufactured by Dab. To make replacement in existing systems easier, the pump can accept PN 6 counter flanges.
Technopolymer impeller. Carbon/ceramic mechanical seal.
The pumps are available both in the single (KLM-KLP) and in the twin (DKLM-DKLP) versions.
For the twin version a built in clapet valve in the delivery port is also included, to avoid water recirculation when the unit is idle. A blind flange is also supplied as a standard, to be applied during maintenance of one of the two motors.
The twin version gives the possibility of alternating the operation of the pumps when a backup unit is required, or to have the two pumps operating simultaneously.

Construction Features Of The Motor

External ventilation cooling, closed, asynchronous type, with four poles for the KLM and DKLM versions, and two poles for the KLP and DKLP versions.
Rotor running on permanently lubricated ball bearings, oversized to ensure low noise and durability.
Standard built-in thermo-amperometric protection. Capacitor permanently fitted on single phase versions.
For the protection of the three-phase motor, we recommend the use of remote overload cut-outs, in compliance with current local regulations.
Construction according to CEI 2-3.
Protection class: IP 55
Insulation class: F
Standard voltage: single-phase 220-240 V, 50 Hz - three-phase 230/400 V, 50 Hz

The DAB DKLP 80-1200 T IE3 Twin Head In-Line Circulator Pump - 415v - Three Phase - 1534 Ltr/min. is a Circulator Pump item. Voltage for this item is 400V. It has an actual flow rate of 1534 Ltr/min. The maximum head for this pump is 67m. This is a Surface Mounted pump which can be suitable when the pump can sit in a dry, accessible location and draw liquid in via a suction pipe or hose.

Product Applications

The DAB CP 50/2600 in-line circulator pump is appropriate for civil and industrial installations for heating, air conditioning, refrigeration and hot water for plumbing. This product is manufactured by Dab.

Construction Includes Of The Pump

Flanged suction and delivery connections in PN 16 with threaded holes for control pressure gauges. Cast Iron pump casing and motor support, Cast Iron and technopolymer impeller. Stainless Steel motor shaft, and Carbon/Graphite mechanical seal. Asynchronous threephase motor, 2 poles, closed and cooled with external ventilation.

The DAB CP 50/2600 T-IE3 In-Line Circulator Pump - 400v - Three Phase - 7005 Ltr/min. is a Circulator Pump item. Voltage for this item is 400V. It has an actual flow rate of 7005 Ltr/min. The maximum head for this pump is 102m. This is a Surface Mounted pump which can be suitable when the pump can sit in a dry, accessible location and draw liquid in via a suction pipe or hose.

Product Applications

Circulating pumps with IN-LINE connections, appropriate for civil and industrial installations for heating, conditioning, refrigeration and hot water for plumbing. This product is manufactured by Dab. Available in single and twin version.

Construction Includes

Flanged suction and delivery connections in PN 16 with threaded holes for control pressure gauges.Cast Iron pump casing and motor support, Cast Iron and technopolymer impeller.Stainless Steel motor shaft, and Carbon/Graphite mechanical seal.Asynchronous threephase motor, 2 poles, closed and cooled with external ventilation.

The DAB DCP 50/1900 T-IE3 Twin Head In-Line Circulator Pump - 400v - Three Phase - 7005 Ltr/min. is a Circulator Pump item. Voltage for this item is 400V. It has an actual flow rate of 7005 Ltr/min. The maximum head for this pump is 102m. This is a Surface Mounted pump which can be suitable when the pump can sit in a dry, accessible location and draw liquid in via a suction pipe or hose.

Product Applications

The DAB DCP 50/2450 in-line circulator pump is appropriate for civil and industrial installations for heating, air conditioning, refrigeration and hot water for plumbing. This product is manufactured by Dab.

Construction Includes Of The Pump

Flanged suction and delivery connections in PN 16 with threaded holes for control pressure gauges. Cast Iron pump casing and motor support, Cast Iron and technopolymer impeller. Stainless Steel motor shaft, and Carbon/Graphite mechanical seal. Asynchronous threephase motor, 2 poles, closed and cooled with external ventilation.

Protection: IP 55
Insulation class: F

The DAB DCP 50/2450 T-IE3 Twin Head In-Line Circulatpr Pump - 400v - Three Phase - 7005 Ltr/min. is a Circulator Pump item. Voltage for this item is 400V. It has an actual flow rate of 7005 Ltr/min. The maximum head for this pump is 102m. This is a Surface Mounted pump which can be suitable when the pump can sit in a dry, accessible location and draw liquid in via a suction pipe or hose.

Product Applications

Circulating pumps with IN-LINE connections, appropriate for civil and industrial installations for heating, conditioning, refrigeration and hot water for plumbing. This product is manufactured by Dab. Available in single and twin version.

Circulating pumps with in-line connections,
Pump body and motor support in Cast Iron.
PN 16 flanged suction and delivery connections with threaded holes for control pressure gauges.
Technopolymer impeller and Carbon/Graphite mechanical seal. Three-phase, four-pole, asynchronous motor with external ventilation. To protect the motor it is advisable to use a thermal overload protection complying with the regulations in force.

The DAB DCP 50/3000 T-IE3 Twin Head In-Line Circulator Pump - 400v - Three Phase - 7005 Ltr/min. is a Circulator Pump item. Voltage for this item is 400V. It has an actual flow rate of 7005 Ltr/min. The maximum head for this pump is 102m. This is a Surface Mounted pump which can be suitable when the pump can sit in a dry, accessible location and draw liquid in via a suction pipe or hose.

Wet electronic central heating circulator pump for water recirculation in heating and conditioning systems in residential building service. This product is manufactured by Dab. Efficient and reliable, equipped with a double-digit display with indication of the parameters. It is ideal for replacing old circulators due to its compact dimensions and the possible settings. The presence of a single key simplifies the configuration by the installer. The included calcium removal cartridge keeps the motor shaft in perfect condition, preventing the normal formation of limescale that it can be generated inside the circulator if some air bubbles are present during the first installation. 5 years warranty.

Construction Includes Of The Pump

Pump body in Cast Iron with cataphoretic treatment. Technopolymer impeller. Graphite thrust bearing. Brass air plug.

Construction Features Of The Motor

Permanent magnet synchronous motor, Stainless Steel motor casing. Motor shaft and ceramic bushings. Rotor jacket, stator jacket and Stainless Steel closing flange. Motor shaft can be unblocked manually.

Construction Features Of The Electronics

Water-resistant variable frequency drive with IPX5 protection. Possibility of configuration by a single key. It is possible to choose from the nine available operating settings: three with proportional pressure, three with constant pressure, three with constant curve. The numeric display can show the current absorption in Watts, the instantaneous flow rate, the head and the set curve. Equipped with automatic degassing function and protection against overload and dry running. Power connector adaptable to connectors of other brands without redoing the electrical connections.

The DAB Evosta3 60/180 Domestic Heating Circulator Pump - 240v - Single Phase - 60 Ltr/min. is a Circulator Pump item. Voltage for this item is 240V. It is supplied with a 1.5m cable. It has an actual flow rate of 60 Ltr/min. The maximum head for this pump is 6m. This is a Surface Mounted pump which can be suitable when the pump can sit in a dry, accessible location and draw liquid in via a suction pipe or hose.

Evosta 2 San is a wet rotor electronic central heating circulator pump for the circulation of drinkable hot water in domestic and residential systems. This product is manufactured by Dab. Ideal for replacing old circulators, even of other brands. Simple configuration with a single key.The included calcium removal cartridge keeps the motor shaft in perfect condition, preventing the normal formation of limescale that it can be generated inside the circulator if some air bubbles are present during the first installation. 5 years warranty.

Construction Includes Of The Pump

Brass pump body, technopolymer impeller. Graphite thrust ring. Integrated brass air vent plug.

Construction Features Of The Motor

Permanent magnet synchronous motor, steel casing, ceramic motor shaft, Stainless Steel stator sleeve and closing flange. EPDM sealing ring.

Construction Features Of The Electronics

Water-resistant variable frequency drive with IPX5 protection. A single key can be applied to scroll through the nine options and set the operating parameters: three for proportional pressure, three for constant pressure, and three for constant speed curves. Overload protection.

The DAB Evosta2 SAN 80/150 Domestic Heating Circulator Pump - 240v - Single Phase - 70 Ltr/min. is a Circulator Pump item. Voltage for this item is 240V. It is supplied with a 1.5m cable. It has an actual flow rate of 70 Ltr/min. The maximum head for this pump is 8m. This is a Surface Mounted pump which can be suitable when the pump can sit in a dry, accessible location and draw liquid in via a suction pipe or hose.

Wet rotor electronic circulator engineered for the circulation of water in conditioning and heating systems in commercial building service.

Wet rotor electronic central heating circulator pump engineered for the circulation of water in residential building service with thermal solar collector heating systems. This product is manufactured by Dab. IPX5 protection.

The circulator is ideal for replacing old three-speed circulators thanks to its compact size and all-round performance. A single key simplifies configuration.

The included calcium removal cartridge keeps the motor shaft in perfect condition, preventing the normal formation of limescale that it can be generated inside the circulator if some air bubbles are present during the first installation. 5 years warranty.

Construction Includes OF The Pump

Cataphoretically-coated Cast Iron pump casing. Steel motor casing, technopolymer impeller. Stainless Steel rotor sleeve, stator sleeve and closing flange. Graphite thrust ring. EPDM sealing rings and brass air vent plug.

Construction Features Of The Motor

Permanent-magnet synchronous motor. Motor with internal overload protection. Energy efficiency index of EEI ¢°¤ 0.20. Direct access to the motor shaft for releasing it when necessary. 1,5 meters molex plug cable.

Contstruction Features Of The Electronics

Control panel on circulator cover. Mode key for selecting nine configuration options. The settings are indicated on the six-segment LED display. The variable frequency drive offers protection against water hammer action and helps to save energy.

The DAB Evosta2 SOL 20-75/130 Solar Domestic Heating Circulator Pump - 240v - Single Phase - 66 Ltr/min. is a Circulator Pump item. Voltage for this item is 240V. It is supplied with a 1.5m cable. It has an actual flow rate of 66 Ltr/min. The maximum head for this pump is 7.5m. This is a Surface Mounted pump which can be suitable when the pump can sit in a dry, accessible location and draw liquid in via a suction pipe or hose.

Product Applications

The DAB Evosta2 40-70/130 is a domestic hot water circulator pump with low energy consumption electronic central heating pump for water circulation in all types of domestic heating and cooling systems.

Advantages Of The Evosta2

The new range of EVOSTA 2 circulators by DAB combines the strength of an mechanical circulator with the benefits of the electronic circulator. This product is manufactured by Dab. Thanks to the permanent magnet synchronous motor, the frequency converter and the energy efficiency of EEI ¢°¤ 0.18, as well as the protection class IPX5 and the integrated bleeding plug, the EVOSTA 2 family ranks as one of the best products in the category in terms of performance and reliability. The range of EVOSTA 2 circulators is the perfect replacement for old three-speed circulators due to its compact size and all-round performance. The product is also extremely user-friendly, with a single button for sequential setting and direct access to the motor shaft for unlocking it when necessary.

Construction Includes Of The Pump

Cast Iron pump body with cataphoresis paint coating and wet rotor motor. Steel motor casing, techno polymer impeller. Ceramic motor shaft on ceramic bushings lubricated by the pumped liquid. Stainless Steel rotor liner, stator liner and closing flange. Graphite thrust ring. EPDM seal ring and brass bleeding plug. Thanks to the internal protection of the motor, the pump does not require any overload protection.

Construction Features Of The Electronics

The settings of the EVOSTA 2, EVOSTA 3 circulators can be modified in the control panel on the facia of the pump device. The pumps have nine settings that can be selected scrolling the MODE button. Three LED lights on the facia show the current setting.

The DAB Evosta2 40-70/130 Domestic Heating Circulator Pump - 240v - Single Phase - 60 Ltr/min. is a Circulator Pump item. Voltage for this item is 240V. It has an actual flow rate of 60 Ltr/min. The maximum head for this pump is 7m. This is a Surface Mounted pump which can be suitable when the pump can sit in a dry, accessible location and draw liquid in via a suction pipe or hose.

The DAB VORTEX BWO 155R is a hot water circulator pump with spherical motor technology and a permanent magnet drive. This product is manufactured by Dab.

Product Applications

The DAB Evosta2 San 40-70/150 is a wet rotor electronic central heating pump for the circulation of drinkable hot water in domestic and residential systems. This product is manufactured by Dab. Ideal for replacing old circulators, even of other brands. Simple configuration with a single key.

The included calcium removal cartridge keeps the motor shaft in perfect condition, preventing the normal formation of limescale that it can be generated inside the circulator if some air bubbles are present during the first installation.

Construction Includes Of The Pump

Brass pump body, technopolymer impeller. Graphite thrust ring. Integrated brass air vent plug.

Construction Features Of The Motor

Permanent magnet synchronous motor, steel casing, ceramic motor shaft, Stainless Steel stator sleeve and closing flange. EPDM sealing ring.

Construction Features Of The Electronics

Water-resistant variable frequency drive with IPX5 protection. A single key can be applied to scroll through the nine options and set the operating parameters: three for proportional pressure, three for constant pressure, and three for constant speed curves. Overload protection.

The DAB Evosta2 SAN 40-70/150 Domestic Heating Circulator Pump - 240v - Single Phase - 60 Ltr/min. is a Circulator Pump item. Voltage for this item is 240V. It is supplied with a 1.5m cable. It has an actual flow rate of 60 Ltr/min. The maximum head for this pump is 7m. This is a Surface Mounted pump which can be suitable when the pump can sit in a dry, accessible location and draw liquid in via a suction pipe or hose.

DAB first smart heating circulator pump, offers unique features thanks to the new DAB 4.0 in terms of assisting the installer and improving the performance of the domestic cooling or heating systems. This product is manufactured by Dab. Combining the strength of an mechanical circulator with the benefits of the electronic circulator.

IPX5 certified degree of protection prevents infiltration of water in the mechanics and electronics mean faults are reduced to a minimum.

Engineered with front electronics, the new user interface with illuminated display and sequential button with immediate feedback makes easier the setting and readability under all conditions. The EVOSTA 3 version has a display showing the instantaneous flow rate, the instantaneous head and the instantaneous power consumption in Watts. The pumps have nine settings that can be selected scrolling the MODE button. Three LED lights on the facia show the current setting.

Easy access to the airvent plug providing access to the shaft for unblocking in case of seizure and automatic degassing.

The range of EVOSTA 3 circulators is the perfect replacement for old three-speed circulators due to its compact size and all-round performance. The circulator can now be replaced easily: the new interchangeable power connector of the Evosta 3 range can be applied with connection plugs of other competitors without the need to rewire all the electrical connections. Even the most awkward replacement is now quick and easy.

Construction Features Of The Pump

Cast Iron pump body with cataphoresis paint coating and wet rotor motor. Steel motor casing, technopolymer impeller. Ceramic motor shaft on ceramic bushings lubricated by the pumped liquid. Stainless Steel rotor liner, stator liner and closing flange. Graphite thrust ring. EPDM seal ring and brass bleeding plug. Thanks to the internal protection of the motor, the pump does not require any overload protection.

Appropriate for pumped liquids clean, free of solids and mineral oils, non-viscous, chemically neutral, with properties similar to water (glycol max 30%)

The DAB Evosta3 80/130 Domestic Heating Circulator Pump - 240v - Single Phase - 70 Ltr/min. is a Circulator Pump item. Voltage for this item is 240V. It is supplied with a 1.5m cable. It has an actual flow rate of 70 Ltr/min. The maximum head for this pump is 6m. This is a Surface Mounted pump which can be suitable when the pump can sit in a dry, accessible location and draw liquid in via a suction pipe or hose.