Product Applications

Hot or cold water circulation pump with in-line ports, appropriate for installation directly on the pipework of civil and industrial heating, air conditioning, refrigeration, and sanitary water systems.

Construction Includes Of The Pump

Pump body and motor support in Cast Iron.

PN 10 flanged suction and delivery ports with threaded holes for control manometers. This product is manufactured by Dab. To make replacement in existing systems easier, the pump can accept PN 6 counter flanges.

Technopolymer impeller. Carbon/ceramic mechanical seal.
The pumps are available both in the single (KLM-KLP) and in the twin (DKLM-DKLP) versions.
For the twin version a built in clapet valve in the delivery port is also included, to avoid water recirculation when the unit is idle. A blind flange is also supplied as a standard, to be applied during maintenance of one of the two motors.

The twin version gives the possibility of alternating the operation of the pumps when a backup unit is required, or to have the two pumps operating simultaneously.

Construction Features Of The Motor

External ventilation cooling, closed, asynchronous type, with four poles for the KLM and DKLM versions, and two poles for the KLP and DKLP versions.

Rotor running on permanently lubricated ball bearings, oversized to ensure low noise and durability.
Standard built-in thermo-amperometric protection. Capacitor permanently fitted on single phase versions.
For the protection of the three-phase motor, we recommend the use of remote overload cut-outs, in compliance with current local regulations.
Construction according to CEI 2-3.
Protection class: IP 55
Insulation class: F
Standard voltage: single-phase 220-240 V, 50 Hz - three-phase 230/400 V, 50 Hz

The DAB DKLP 50-1200 T IE3 Twin Head In-Line Circulator Pump - 415v - Three Phase - 1534 Ltr/min. is a Circulator Pump item. Voltage for this item is 400V. It has an actual flow rate of 1534 Ltr/min. The maximum head for this pump is 67m. This is a Surface Mounted pump which can be suitable when the pump can sit in a dry, accessible location and draw liquid in via a suction pipe or hose.

Product Applications

Circulating pumps with IN-LINE connections, appropriate for civil and industrial installations for heating, conditioning, refrigeration and hot water for plumbing. This product is manufactured by Dab. Available in single and twin version.

Construction Includes

Flanged suction and delivery connections in PN 16 with threaded holes for control pressure gauges. Cast Iron pump casing and motor support, Cast Iron and technopolymer impeller. Stainless Steel motor shaft, and SEE "SHAFT SEAL" SECTION mechanical seal. Asynchronous threephase motor, 2 poles, closed and cooled with external ventilation.

Protection: IP 55
Insulation class: F

- Operating range: from 3,6 to 420 m3/h with head up to 102 metres

- Liquid quality requirements: clean, free from solids or abrasive substances, non viscous,
non aggressive, non crystallized, chemically neutral, close to the characteristics of water.

The DAB DCP-G 100-3050/A/BAQE/15-IE3 Twin Head In-Line Circulator Pump - 400v - Three Phase - 7005 Ltr/min. is a Circulator Pump item. Voltage for this item is 400V. It has an actual flow rate of 7005 Ltr/min. The maximum head for this pump is 102m. This is a Surface Mounted pump which can be suitable when the pump can sit in a dry, accessible location and draw liquid in via a suction pipe or hose.

Wet rotor electronic circulator with bronze pump body engineered for the circulation of domestic hot water in small collective domestic, residential, civil and commercial systems.

Wet rotor electronic circulator engineered for the circulation of water in conditioning and heating systems in commercial building service. This product is manufactured by Dab. The single version includes insulation shells.

Wet rotor electronic circulator engineered for the circulation of water in conditioning and heating systems in commercial building service. This product is manufactured by Dab. The single version includes insulation shells.

Product Applications

Low energy consumption electronic central heating pump for domestic hot water circulation.

Advantages

The new range of EVOSTA 2 SAN circulators by DAB combines the strength of a mechanical circulator with the benefits of an electronic circulator.

Thanks to the permanent magnet synchronous motor, the frequency converter and the energy efficiency of EEI ¢°¤ 0.18, as well as the protection class IPX5 and the integrated bleeding plug. This product is manufactured by Dab. EVOSTA 2 SAN family ranks as one of the best products in the category in terms of performance and reliability.

The range of EVOSTA 2 SAN circulators is the perfect replacement for old three-speed circulators due to its compact size and all-round performance. The product is also extremely user-friendly, with a single button for sequential setting and direct access to the motor shaft for unlocking it when necessary.

Construction Includes

Bronze pump body and wet rotor motor. Steel motor casing, technopolymer impeller. Ceramic motor shaft on ceramic bushings lubricated by the pumped liquid.

Stainless Steel rotor liner and closing flange. Graphite thrust ring. EPDM seal ring and brass air bleeding plug. Thanks to the internal protection of the motor, the pump does not require any overload protection.

Control Panel

The settings of EVOSTA 2 SAN circulators can be modified in the control panel on the facia of the pump. The pump has nine settings that can be selected scrolling the MODE button.

Six illuminated segments on the display indicate the settings of the pump.

The DAB Evosta2 SAN V 11-139 Domestic Heating Circulator Pump - 240v - Single Phase is a Circulator Pump item. Voltage for this item is 240V. It is supplied with a 1.5m cable. The maximum head for this pump is 1m. This is a Surface Mounted pump which can be suitable when the pump can sit in a dry, accessible location and draw liquid in via a suction pipe or hose.

Compact wet rotor electronic circulator with bronze pump body engineered for the circulation of domestic hot water in commercial building service. This product is manufactured by Dab. It is equipped with an integrated variable frequency drive to ensure better all-round performance and energy efficiency, it also protects the system against water hammer action.

Circulator for domestic hot water systems of the closed circuit pressurized type or open circuit type. This product is manufactured by Dab. Bronze pump body. Motor casing in die-cast aluminium. Technopolymer impeller. Ceramic motor shaft mounted on graphite bushings lubricated by the pumped liquid. Stainless Steel rotor sleeve, stator sleeve and closing flange. Ceramic thrust ring, ethylene propylene sealing rings. Synchronous motor with permanent magnet rotor.

Wet rotor electronic circulator engineered for the circulation of water in conditioning and heating systems in commercial building service. This product is manufactured by Dab. The single version includes insulation shells.
The Evoplus D versions are supplied as standard with an automatic non-return suction valve incorporated in the delivery port to avoid water recirculating through the unit when it is not running and a blank flange for servicing either of the two motors. Possibility of remote control with the DConnect service (DConnect Box supplied separately).

Wet rotor electronic circulator engineered for the circulation of water in conditioning and heating systems in commercial building service. This product is manufactured by Dab. The integrated variable frequency drive ensures greater comfort and protection against water hammer action, and also saves energy by adapting the motor speed to actual requirements.

The DAB VORTEX BWO 155V Timer Hot Water Circulator - 11/4" - 240v - Single Phase - NO DESCRIPTIVE DATA is a Circulator Pump item. This product is manufactured by Dab. Voltage for this item is 240V. It has an actual flow rate of 15 Ltr/min. The maximum head for this pump is 1.3m. This is a Surface Mounted pump which can be suitable when the pump can sit in a dry, accessible location and draw liquid in via a suction pipe or hose.

Wet rotor electronic central heating circulator pump engineered for the circulation of water in conditioning and heating systems in commercial building service. This product is manufactured by Dab. The single version includes insulation shells.

Product Applications

Hot or cold water circulation pump with in-line ports, appropriate for installation directly on the pipework of civil and industrial heating, air conditioning, refrigeration, and sanitary water systems.

Construction Features Of The Pump

Pump body and motor support in Cast Iron. This product is manufactured by Dab. PN 10 flanged suction and delivery ports with threaded holes for control manometers. To make replacement in existing systems easier, the pump can accept PN 6 counter flanges. Technopolymer impeller. Carbon/ceramic mechanical seal.

The pumps are available both in the single (KLM-KLP) and in the twin (DKLM-DKLP) versions. For the twin version a built in clapet valve in the delivery port is also included, to avoid water recirculation when the unit is idle.

A blind flange is also supplied as a standard, to be applied during maintenance of one of the two motors. The twin version gives the possibility of alternating the operation of the pumps when a backup unit is required, or to have the two pumps operating simultaneously.

Construction Features Of The Motor

Pump body and motor support in Cast Iron. PN 10 flanged suction and delivery ports with threaded holes for control manometers. To make replacement in existing systems easier, the pump can accept PN 6 counter flanges. Technopolymer impeller. Carbon/ceramic mechanical seal. The pumps are available both in the single (KLM-KLP) and in the twin (DKLM-DKLP) versions. For the twin version a built in clapet valve in the delivery port is also included, to avoid water recirculation when the unit is idle. A blind flange is also supplied as a standard, to be used during maintenance of one of the two motors. The twin version gives the possibility of alternating the operation of the pumps when a backup unit is required, or to have the two pumps operating simultaneously.

The DAB DKLM 80-600 T IE3 Twin Head In-Line Circulator Pump - 415v - Three Phase - 1534 Ltr/min. is a Circulator Pump item. Voltage for this item is 400V. It has an actual flow rate of 1534 Ltr/min. The maximum head for this pump is 67m. This is a Surface Mounted pump which can be suitable when the pump can sit in a dry, accessible location and draw liquid in via a suction pipe or hose.

Wet rotor electronic circulator engineered for the circulation of drinkable hot water in residential building service and commercial building service. This product is manufactured by Dab. Possibility of remote control with the DConnect service, the DConnect Box is supplied separately.

Wet rotor electronic central heating circulator engineered for the circulation of water in conditioning and heating systems in commercial building service. This product is manufactured by Dab. The single version includes insulation shells.