Male Brass Threaded Hosetail Connection - 3/4" X 19mm

The Male Brass Threaded Hosetail Connection - 3/4" X 19mm is a Hose Spares item.

Male BSP Threaded Brass Hosetail - 1¼" x 30mm

The Male BSP Threaded Brass Hosetail - 1¼" x 30mm is a Hose Spares item.

RCM Male BSP Threaded Plastic Elbow - 1.1/4"

The RCM Male BSP Threaded Plastic Elbow - 1.1/4".

The Swift Quick Release Bayonet Coupling - Male - 3/4" is a Spares item.

Swift Quick Release Bayonet Coupling - Male - 1½"

The Swift Quick Release Bayonet Coupling - Male - 1½" is a Accessories item.

Fits ABS MF Pumps

The ABS Sulzer MF565 and MF665 Series Support Legs is a Spares item.

Koshin engine pump replacement volute casing SER50 SERH50 0112819

Most of the Koshin engine pump components have a 7-9 digit reference stamped on them

Please check your current part and it matches up to the replacement

The Koshin Volute Casing SER-50 Replacement Part.

Koshin (est. 1948) is a Japanese manufacturer of portable pumps, including petrol, diesel and electric models. Their ranges are commonly used for agriculture, irrigation, site drainage, emergency dewatering and general water transfer tasks.

Koshin engine pump replacement volute SER-40 SERH-50B

Most of the Koshin engine pump components have a 7-9 digit reference stamped on them

Please check your current part and it matches up to the replacement

The Koshin Volute SER-40/SERH-50B Replacement Engine Pump Spare is a Spares item.

Ebara Minimum Suction Kit for manual Ebara Best One and Ebara Optima submersible pumps.

This kit includes a ring that is fitted to the bottom of the pump. It is primarily designed for the manual versions of these pumps, although it can be used with the float versions by securing the float in an upward position (IMPORTANT: take care not to let the pump run dry).

The pump must start from a water level above the top of the black ring to prime properly, but it can then drain water down to just a few millimetres.

PLEASE NOTE: PUMP NOT INCLUDED, shown for illustrative purposes only.

Accessories Included

The AquaScan comes with a range of accessories to facilitate connection to various outlet types, all neatly hoapplied in a robust protective carry case for easy storage and transportation. This product is manufactured by Salamander. The accessories include:

How It Works

Using the AquaScan is straightforward:

1. Power On/Off: Press the power button to turn the AquaScan on or off
2. Live Readings: The digital display shows live readings, including peak and current measurements
3. Reset Peak Values: While connected to an outlet, press the reset button to reset peak values
4. Display Selection: Easily switch between different displays using the display button
5. Rechargeable Battery: The AquaScan is powered by a rechargeable battery, which can be charged using the supplied USB-C cable

Benefits

The AquaScan is an invaluable tool for quickly identifying water temperature, pressure, and flow issues, as well as detecting hard water areas that could lead to limescale build-up and reduced energy efficiency. Its compact design, robust construction, and comprehensive accessory kit make it a versatile and reliable choice for any water measurement needs.

The Salamander AquaScan 4-in-1 Digital Water Multimeter.

Tsurumi's Discharge Bend 80 3-inch, part number 10-85-1008, is a crucial component designed for specific Tsurumi - submersible Pump - 10-85-1008 models. This discharge bend serves as an essential connection piece in wastewater and sewage pumping systems, facilitating the efficient transfer of fluids containing solids and fibrous materials.

Square flange with a 90° elbow and female BSP outlet flange for free-standing Uses.

Compatibility:

The Discharge Bend 80 3-inch is specifically engineered to fit Tsurumi - pump models in the 80 series, including but not limited to:

• 80B21.5
• 80C21.5
• 80C41.5
• 80U21.5
• 80U22.2
• 80U23.7

Dimensions:

• Bore size: 3 inches (80mm)
• Connection type: NPT (National Pipe Thread)

Durability:

Constructed with high-quality materials to withstand the harsh conditions typically encountered in sewage and wastewater Uses.

Efficient Flow:

The bend is designed to maintain optimal flow characteristics, reducing turbulence and minimising the risk of clogging.

Versatility:

This discharge bend can be utilised in various municipal, industrial, and commercial pumping Uses, offering flexibility in installation and operation.

Tsurumi (est. 1924) is a Japanese manufacturer specialising in heavy-duty submersible pumps for drainage, construction dewatering and wastewater. Product ranges include contractor dewatering, slurry and sewage pumps. Common applications include site dewatering, civil engineering, tunnelling, quarrying and public wastewater projects requiring solids handling.

The SwitcH2O sensor replacement, identified by SKU 16-40-1001, is specifically engineered for use with the LSC1.4S puddle Pump - 16-40-1001. It features a set of three probes made of 304 Stainless Steel, ensuring durability and corrosion resistance. These probes are set in an epoxy-resin-filled holder, providing robust protection against water ingress.

The SwitcH2O has been designed specifically for use with the LSC1.4S residue pump utilizing a  (optional extra) for controlling low water levels. 3 probes, are set in an epoxy-resin filled holder and they represent on, off and common. 

Functionality

The three probes serve distinct purposes:

• On probe
• Off probe
• Common probe

This configuration allows for precise control of water levels, enabling the pump to activate and deactivate at predetermined points.

Compatibility

The SwitcH2O is designed to work seamlessly with a Multi 1 control panel, which is available as an optional extra. This combination enhances the system's ability to manage low water levels effectively.

Construction

• Probes: 304 Stainless Steel
• Power cable: PVC insulation

The use of high-quality materials ensures longevity and reliable dynamic performance in challenging environments.

The Tsurumi - Electrode Sensor Replacement (SKU 090-126-15) is a specialised component designed for the KTVE series of automatic submersible drainage pumps manufactured by Tsurumi. This electrode extension allows users to adjust the starting water level of their KTVE series pumps, enhancing their functionality and adaptability to various pumping scenarios.

The KTVE pumps offer an automatic option to the KTV series, without the need for external control panels and cumbersome float switches. A sensor probe is mounted in a durable, moulded rubber bracket and, for added protection, it is positioned within the footprint of the Pump - 090-126-15 base. Once the water level reaches the probe, the pump will start and continue to operate for one minute after the water falls below it. However, if the water level touches the probe within this time, the "stop" signal is cancelled and the pump continues to run until the water is cleared. To enable a lower "on level" (by a further 90mm), the sensor probe can be lengthened by fitting the electrode extender, which is an optional extra. 

Special use option: IDS (individually screened cable) on 3.7KW and 5.5KW models. (Please request a quotation)

• Item Code: 090-126-15
• Dimensions: 1.0 mm diameter x 10.70 mm diameter x 100 mm length
• Quantity: 1 piece per set
• Compatibility: KTVE and KTZE series pumps

Additional Notes:

• The extension can be cut to adjust the starting water level further, though cut portions cannot be reattached
• Only one extension should be connected to each electrode

This electrode sensor replacement works in conjunction with the pump's built-in level relay unit. When water reaches the extended electrode, it triggers the pump to start. The pump continues to operate for approximately one minute after the water level drops below the electrode. If water contacts the electrode again within this minute, the pump continues running until the water is cleared.

Application: The special low-level float is ideal for installations where water needs to be pumped down to minimal depths, such as:

Compatibility: This float switch is fully compatible with Jung U5KS and U6KS pump ranges, ensuring seamless integration with existing systems.

The Pentair Jung Special Low-Level Float for U5 & U6 Pumps.

• Engineered specifically for U5 and U6 series Jung pumps
• Enables pumping at lower water levels than standard floats
• Improves pump efficiency in shallow water conditions
• Durable construction for long-lasting performance

• Basement drainage systems
• Flood-prone areas
• Industrial sumps
• Agricultural drainage

Pentair (est. 1966) is a global water solutions company supplying pumps and system components for water movement and treatment. Their ranges cover boosters, well and pool pumps, drainage products and filtration-led solutions. Typical applications include domestic water supply, swimming pool circulation, irrigation, pressure systems and commercial water treatment.

The Grundfos Valve and Diaphragm Kit - SD-S-PP/V/C-1 (SKU: 97751433) is a high-quality replacement component developed for Grundfos SMART Digital dosing pumps.

This kit is essential for maintaining optimal performance and extending the lifespan of your dosing pump system.

Engineered with precision and durability in mind, it ensures reliable and accurate chemical metering in various industrial applications.

The Tsurumi - HS2.4S Puddle Pump - 10-85-1016 Adaptor Kit (SKU 10-85-1016) is an indispensable accessory for transforming your Tsurumi - HS2.4S submersible pump into a highly efficient puddle pump. This innovative kit enables you to pump water down to a remarkable depth of just 10mm, making it perfectly suited for various Uses where thorough water extraction is critical.

Product Features

Construction and Design

• Manufactured from steel coated with rubber for robust durability and corrosion resistance
• Simple to install and remove, offering exceptional flexibility for diverse pumping requirements

dynamic performance Enhancement

• Converts the HS2.4S into a puddle pump, substantially improving its low-level pumping capabilities
• Facilitates water removal down to 10mm, ensuring near-complete drainage of work areas

Compatibility

• Specifically engineered for use with the Tsurumi - HS2.4S submersible pump
• Seamlessly integrates with the pump's existing Key Product Spec

Versatility

• Ideal for construction sites, flood remediation, and other scenarios requiring efficient water extraction
• Enhances the pump's utility across a broad spectrum of challenging environments

• Augments the versatility of your Tsurumi - HS2.4S pump
• Improves efficiency in water removal tasks
• Reduces time and manual effort in draining waterlogged areas
• Extends the operational capabilities of your pump in varied work settings