Flamco

For easy mounting of Cubex R vessels of 12 - 18 litres to a wall.

Flamco (est. 1956) is a Dutch manufacturer of HVAC and plumbing system components, including expansion vessels, air separators and pressurisation accessories. Their ranges are used in heating and chilled-water circuits and potable water systems across domestic and commercial installations.

Flexofit Super absorbs water hammer in order to minimize noise and damage to the system. A water hammer arrestor absorbs the wave of pressure before it can develop into water hammer. The Flexofit Super does this by having two areas that are separated by a rubber diaphragm. On one side, there is a gas cushion under pressure, while the other side is in connected to the system. The gas cushion compresses and absorbs the wave of pressure.

Flamco (est. 1956) is a Dutch manufacturer of HVAC and plumbing system components, including expansion vessels, air separators and pressurisation accessories. Their ranges are used in heating and chilled-water circuits and potable water systems across domestic and commercial installations.

Purpose-built thermal storage for heat pumps and sealed heating circuits, the Flextherm PS Buffer Vessel stores heated water to stabilise flow, smooth demand and reduce compressor cycling.

A floor-standing steel tank with 90° opposed connections lets you tuck the vessel neatly into a corner for a smaller plantroom footprint. Models up to 2000 Ltrs include height-adjustable feet for accurate levelling, and there are 4 × G½" temperature sensor ports for precise control. Multiple buffers can be connected in series or parallel for higher volume.

For cooling applications that require factory insulation, specify the Flextherm PSK variant. Alternative connections, capacities and operating pressures are available on request.

Built for closed chilled-water circuits, this flanged buffer vessel adds stable thermal mass to improve control and flow in cooling installations.

Installation is straightforward thanks to height-adjustable feet for precise levelling and large flange connections that accommodate high circulation rates. Three G½" temperature-sensor ports simplify monitoring and integration.

• High-flow ready via oversized flange tappings
• Fast, accurate setup with adjustable feet
• Service-friendly robust construction; easy to assemble
• Instrumentation — 3 × G½" sensor connections

Insulation for the Flextherm PS-K 2000.

Flamco (est. 1956) is a Dutch manufacturer of HVAC and plumbing system components, including expansion vessels, air separators and pressurisation accessories. Their ranges are used in heating and chilled-water circuits and potable water systems across domestic and commercial installations.

Store and deliver mains-pressure hot water with Flextherm Supastor Indirect Unvented Cylinders—compact, high-performance stainless-steel vessels for closed potable systems.

Designed to UK specs with neat in-line connections, each cylinder is supplied complete with controls, including a 2-port motorised valve, for quick, compliant installation in domestic or commercial plant rooms.

• Application: domestic and commercial potable hot/cold water storage
• Design: indirect, unvented cylinders for closed-circuit water supply
• Connections: compact layout with in-line tappings for easy install
• Controls included: full kit with 2-port motorised valve
• Material: Stainless Steel DUPLEX LDX 2101 (EN 1.4162)
• Performance limits: max working pressure 6.0 Bar; max working temperature 90 °C
• Efficiency: economical running with rapid heat-up and recovery

The compact, proven design has high efficiency and guaranteed operation for heating and air conditioning. The water within the installation contains air which can form corrosion and reduce the thermal transfer. A Flexvent is fitted at places where the air collects. Most types are equipped with a shut-off valve for easy fitting and dismantling. A Flexvent float vent is easy to fit in any installation due to its very small dimensions. The relatively large air cushion at the top of each type of Flexvent float vent protects the valve seat sufficiently against contamination, so that the Flexvent will not leak. To guarantee top quality, we test all Flexvents before they leave our facility!

Flamco (est. 1956) is a Dutch manufacturer of HVAC and plumbing system components, including expansion vessels, air separators and pressurisation accessories. Their ranges are used in heating and chilled-water circuits and potable water systems across domestic and commercial installations.

Automatic air removal made simple: Flamco Flexvent floating air vents purge trapped air continuously to protect pumps, valves and emitters in sealed systems.

A brass housing with an all-plastic internal mechanism uses a float-operated valve to open when air accumulates and close again once water returnsno manual intervention needed. Versions with a valve sleeve (shut-off valve) in ⅜", " and " sizes feature a self-sealing notched gasket for tape-free installs.

• Captive cap with user-friendly open/close and leak-prevention
• Quick installation: self-sealing gasket on valve-sleeve models (⅜", ", ")
• Reliable operation: large water/closure gap reduces contamination risk
• Factory tested: every Flexvent is function-tested before dispatch
• No drain-down routine venting during normal operation

Automatic air removal made simple: Flamco Flexvent floating air vents purge trapped air continuously to protect pumps, valves and emitters in sealed systems.

A brass housing with an all-plastic internal mechanism uses a float-operated valve to open when air accumulates and close again once water returnsno manual intervention needed. Versions with a valve sleeve (shut-off valve) in ⅜", " and " sizes feature a self-sealing notched gasket for tape-free installs.

• Captive cap with user-friendly open/close and leak-prevention
• Quick installation: self-sealing gasket on valve-sleeve models (⅜", ", ")
• Reliable operation: large water/closure gap reduces contamination risk
• Factory tested: every Flexvent is function-tested before dispatch
• No drain-down routine venting during normal operation

Safety valves with pressure gauge for sealed central heating and chilled water (cooling) installations.

Prescor safety valves have a special shape which, not only achieves a perfect seal, but also provides a large blow off capacity. The valve seal is made of high quality rubber which is heat resistant to 140 °C and where the hardness of the rubber adjusts to the set pressure of the safety valve. In this way, the valve cannot stick to the seat.

All valves are tested before they leave our facility and are available for heating and cooling installations as well as for protection of various hot water storage appliances. For safety valves for potable water installations see "Accessories for Sanitary Installations".

Flamco (est. 1956) is a Dutch manufacturer of HVAC and plumbing system components, including expansion vessels, air separators and pressurisation accessories. Their ranges are used in heating and chilled-water circuits and potable water systems across domestic and commercial installations.

For sealed central heating and chilled water (cooling) installations. The valve opens when the pressure increases excessively.

Prescor safety valves have a special shape which, not only achieves a perfect seal, but also provides a large blow off capacity. The valve seal is made of high quality rubber which is heat resistant to 140 °C and where the hardness of the rubber adjusts to the set pressure of the safety valve. In this way, the valve cannot stick to the seat.

All valves are tested before they leave our facility and are available for heating and cooling installations as well as for protection of various hot water storage appliances. For safety valves for potable water installations see "Accessories for Sanitary Installations".

• Specially designed pop action for full discharge at opening pressure to reduce the pressure quickly.
• High quality materials and state-of-the-art design features guarantee a high degree of safety.
• CE-conformity mark (PED 2014/68/EU), for application areas according to Pressure Equipment Directive.
• The opening pressure of all valves is individually tested.

Flamco (est. 1956) is a Dutch manufacturer of HVAC and plumbing system components, including expansion vessels, air separators and pressurisation accessories. Their ranges are used in heating and chilled-water circuits and potable water systems across domestic and commercial installations.

Wall-mounted, plug-and-play digital pressurisation unit with preset delivery pressures, the Pro PDm keeps sealed systems at stable minimum pressure using an electronic pressure transducer and intuitive microprocessor control.

A 4 Ltrs internal break tank and top-up capacity to 12 L/min suit commercial, industrial and larger residential installs (guide volume ≤ 50,000 Ltrs). Factory preset delivery options of 1.0, 1.5, 2.0 or 2.5 Bar speed commissioning; setpoints are also adjustable in 0.1 Bar steps.

• Self-venting pumps and presets minimise conventional commissioning
• Dry-run, anti-seize (2-second pulse after 60 days) and flood-protection routines
• System fill mode, pump pulse option and on-screen 12-month service reminder
• MODBUS RTU, password-protected menus and bi-directional programming
• Finished in grey (RAL 7016); power supply 230V 50Hz 1ph

Keep sealed systems steady with the Pro PUm a wall-mounted digital pressurisation unit that uses an electronic pressure transducer and microprocessor control to maintain minimum pressure with confidence.

Delivering up to 12 L/min top-up via a 4 Ltrs internal break tank, it suits commercial, industrial and large domestic applications. Pressure can be adjusted in precise 0.1 Bar steps, and configuration is fast thanks to a bi-directional menu, system fill mode and password-protected access.

• Wall-mounted compact enclosure in grey (RAL 7016)
• MODBUS RTU integration for BMS connectivity
• Protective routines: dry-run, anti-seize and flood protection
• Comprehensive logging and 12-month on-screen service reminder

The accessory for draining low positioned tap points. Flexible in use. With hook for easy storage. Vital for every installer. Made from high grade SBR rubber. Capacity 4 Ltr.

Open 90° tundish, fitted between the Prescor safety valve and the discharge pipe. It enables you to check through the opening whether the safety valve is discharging excess water.

Flamco (est. 1956) is a Dutch manufacturer of HVAC and plumbing system components, including expansion vessels, air separators and pressurisation accessories. Their ranges are used in heating and chilled-water circuits and potable water systems across domestic and commercial installations.

For mounting Flexcon/Airfix vessels of 8 - 25 litres. Provided with a slot into which the Flexcon vessel clamp ring fits precisely. Tightening the two bolts is all that is needed to make a sturdy connection.

• MB 3: With spring and adapter for easy mounting.

• Separately available are sets of 5 bands for connection vessels without clench ring (size approx. 325 mm).

Flamco (est. 1956) is a Dutch manufacturer of HVAC and plumbing system components, including expansion vessels, air separators and pressurisation accessories. Their ranges are used in heating and chilled-water circuits and potable water systems across domestic and commercial installations.