Flamco

Flamco - 25 Ltr - Flexconsole S 20 Plus Wall Mounting - Up To

This is a Spares/Kit item, please get in touch for product compatibility.

Flamco (est. 1956) is a Dutch manufacturer of HVAC and plumbing system components, including expansion vessels, air separators and pressurisation accessories. Their ranges are used in heating and chilled-water circuits and potable water systems across domestic and commercial installations.

This isolating union connects the expansion vessel to the central heating system and enables verification of the vessels gas charge or, alternatively, allows you to replace it without draining the entire system.

• Saves a considerable amount of time when servicing a Flexcon vessel.
• Enables you to check the pre-charge pressure without having to disconnect the vessel.
• Enables you to change the vessel or check the pre-charge pressure without having to release the system pressure or drain the system.
• With integrated ball valve and hose connection.
• Flexcontrol " F / 1" F: With swivel nut connection for easy mounting of the expansion vessel.

Flamco (est. 1956) is a Dutch manufacturer of HVAC and plumbing system components, including expansion vessels, air separators and pressurisation accessories. Their ranges are used in heating and chilled-water circuits and potable water systems across domestic and commercial installations.

This isolating union connects the expansion vessel to the central heating system and enables verification of the vessels gas charge or, alternatively, allows you to replace it without draining the entire system.

• Saves a considerable amount of time when servicing a Flexcon vessel.
• Enables you to check the pre-charge pressure without having to disconnect the vessel.
• Enables you to change the vessel or check the pre-charge pressure without having to release the system pressure or drain the system.
• With integrated ball valve and hose connection.
• Flexcontrol " F / 1" F: With swivel nut connection for easy mounting of the expansion vessel.

Flamco (est. 1956) is a Dutch manufacturer of HVAC and plumbing system components, including expansion vessels, air separators and pressurisation accessories. Their ranges are used in heating and chilled-water circuits and potable water systems across domestic and commercial installations.

Flamco - Flexfast Isolating Union - 3/4

This is a Spares/Kit item, please get in touch for product compatibility.

Flamco (est. 1956) is a Dutch manufacturer of HVAC and plumbing system components, including expansion vessels, air separators and pressurisation accessories. Their ranges are used in heating and chilled-water circuits and potable water systems across domestic and commercial installations.

Protect sealed heating and chilled-water circuits with the Flamco Prescor Safety Valve — a pop-action relief valve that opens at the set pressure to discharge quickly and safely.

Its special geometry delivers a perfect seal and high blow-off capacity. A heat-resistant rubber seat (to 140 °C) adapts hardness to the set pressure, helping prevent the valve from sticking to its seat. Every unit is CE-marked and individually tested for opening pressure.

• Pop-action mechanism for full, rapid discharge at opening pressure
• Heat-resistant rubber seal rated to 140 °C; anti-stick performance
• High blow-off capacity with reliable reseating
• Factory tested — each valve's opening pressure is verified
• CE conformity per PED 2014/68/EU

Protect sealed heating and chilled-water circuits with the Flamco Prescor Safety Valve — a pop-action relief valve that opens at the set pressure to discharge quickly and safely.

Its special geometry delivers a perfect seal and high blow-off capacity. A heat-resistant rubber seat (to 140 °C) adapts hardness to the set pressure, helping prevent the valve from sticking to its seat. Every unit is CE-marked and individually tested for opening pressure.

• Pop-action mechanism for full, rapid discharge at opening pressure
• Heat-resistant rubber seal rated to 140 °C; anti-stick performance
• High blow-off capacity with reliable reseating
• Factory tested — each valve's opening pressure is verified
• CE conformity per PED 2014/68/EU

Protect sealed heating and chilled-water circuits with the Flamco Prescor Safety Valve — a pop-action relief valve that opens at the set pressure to discharge quickly and safely.

Its special geometry delivers a perfect seal and high blow-off capacity. A heat-resistant rubber seat (to 140 °C) adapts hardness to the set pressure, helping prevent the valve from sticking to its seat. Every unit is CE-marked and individually tested for opening pressure.

• Pop-action mechanism for full, rapid discharge at opening pressure
• Heat-resistant rubber seal rated to 140 °C; anti-stick performance
• High blow-off capacity with reliable reseating
• Factory tested — each valve's opening pressure is verified
• CE conformity per PED 2014/68/EU

Protect sealed heating and chilled-water circuits with the Flamco Prescor Safety Valve — a pop-action relief valve that opens at the set pressure to discharge quickly and safely.

Its special geometry delivers a perfect seal and high blow-off capacity. A heat-resistant rubber seat (to 140 °C) adapts hardness to the set pressure, helping prevent the valve from sticking to its seat. Every unit is CE-marked and individually tested for opening pressure.

• Pop-action mechanism for full, rapid discharge at opening pressure
• Heat-resistant rubber seal rated to 140 °C; anti-stick performance
• High blow-off capacity with reliable reseating
• Factory tested — each valve's opening pressure is verified
• CE conformity per PED 2014/68/EU

The Prescor T&P temperature and pressure relief valves control and limit the temperature and pressure of the hot water contained in a domestic water heater or storage vessel and prevent it from being able to reach temperatures that are too high.

On reaching the settings, the valve discharges a sufficient amount of water into the atmosphere so that the temperature and pressure return within the system's operating limits.

Flamco (est. 1956) is a Dutch manufacturer of HVAC and plumbing system components, including expansion vessels, air separators and pressurisation accessories. Their ranges are used in heating and chilled-water circuits and potable water systems across domestic and commercial installations.

For protecting water heaters and potable water systems.

When the system pressure reaches the set pressure, the Prescor B boiler valve begins to vent, whereby the pressure stops rising.

If, due to specific circumstances, the pressure rapidly rises over the set pressure, the Prescor B boiler valve will open fully, creating a large blow off capacity.

This is a permanent, reliable safeguard against overpressure.

Venting can be prevented by installing a suitably sized Airfix expansion vessel for sanitary systems.

Flamco (est. 1956) is a Dutch manufacturer of HVAC and plumbing system components, including expansion vessels, air separators and pressurisation accessories. Their ranges are used in heating and chilled-water circuits and potable water systems across domestic and commercial installations.

The compact, proven design has high efficiency and guaranteed operation for heating and air conditioning.

The water within the installation contains air which can form corrosion and reduce the thermal transfer. A Flexvent is fitted at places where the air collects.

• The cap of the Flexvent Super is conical in shape. The advantage of this construction is that the clearance between the water level and venting valve is maximized.
• The air escape duct can be opened or closed with an adjusting screw
• The venting valve forms an integral part of the cap, so that it is impossible to damage the float vent mechanism from outside

Flamco (est. 1956) is a Dutch manufacturer of HVAC and plumbing system components, including expansion vessels, air separators and pressurisation accessories. Their ranges are used in heating and chilled-water circuits and potable water systems across domestic and commercial installations.

Cone-shaped air chamber equipped with a long float to create more distance to the vent valve.
This reduces the risk of contamination of the valve seat to a minimum.

• Maximum working temperature: 120 °C.

For Use With:

• Flamco Flamcovent (Smart DN 50 - 600
• Flamco Flamcovent Clean (Smart) DN 50 - 600
• Flamco FlexBalance (Plus)

Flamco (est. 1956) is a Dutch manufacturer of HVAC and plumbing system components, including expansion vessels, air separators and pressurisation accessories. Their ranges are used in heating and chilled-water circuits and potable water systems across domestic and commercial installations.

Compact and totally enclosed digital pressurisation units with electronic pressure transducer and user-friendly microprocessor for use on sealed system in order to provide a minimum system pressure requirement.

The Digifiller is a wall-mounted, flow rate (up to 12 l/min) top-up pressurisation unit with 4 litre internal break tank.

Self venting pumps and preset options to remove the need for conventional commissioning of the Pressurisation Unit.

Ideal for Industrial, commercial or large domestic applications.

Available preset to 0.5 bar, 1.0 bar, 1.5 Bar.

Product Includes:

Compact, totally enclosed combined digital pressurisation units.

System fluid is sampled from the system, isolated and subjected to a full vacuum.

All dissolved air within the sample is liberated in accordance with Henry’s Law and vented to atmosphere.

The deaerated fluid is then reintroduced to the system.

This process is automatically repeated and controlled with a digital processor.

The Flamco Flexfiller Plus 250D Digital Pressurisation Unit - Floor Mounted - 6 bar. is a Pressurisation Unit item.

Compact, totally enclosed combined digital pressurisation units. System fluid is sampled from the system, isolated and subjected to a full vacuum. All dissolved air within the sample is liberated in accordance with Henrys Law and vented to atmosphere. The deaerated fluid is then reintroduced to the system. This process is automatically repeated and controlled with a digital processor. A turbo mode is available for initial system setup to allow for rapid deaeration of new installations. The real-time display shows the status of the mechanical components.

The Flexfiller Plus and Midifill Plus are compact, totally enclosed combined digital pressurisation units wit h vacuum degasser for use on sealed systems in order to provide a minimum system pressure requirement and effective dissolved gas removal.

System Volume (Guide): < 300,000 litres (Midifill Plus 150D: < 50,000 litres).

Application:

• Commercial and Industrial

Product Features:

• For system volumes up to 300,000 litres (Midifill Plus 150D: < 50,000 litres).
• Available with single pump (Midifill Plus) or double pump (for duty/standby configuration).
• Fluid Protection Category 5 (AB Weir Overflow.
• Onscreen Service Reminder - 12 Months.
• Individual controllers for pressurisation and degassing function.
• Vacuum degassing, turbo and normal interval modes.
• Electric pump, 230V 50Hz 1ph (2160D: 415V 50Hz 3ph).
• Colour: Midifill Plus: White (RAL 9003), Flexfiller Plus: Black (RAL 9005).
• MODBUS RTU Communication Protocol.
• System fill mode.
• Password protected.
• Pressure setting in 0.1 bar. increments.
• Sequential programming menu.
• Pump pulse option.
• Flood Protection (Pump Runtime Limiter, Excessive Start Alarm).
• Event logging: Alarm activations, Pump Run counter (activations per pump), Cumulative run timer (hours per pump), Electrical interuption.
• Volt free contacts: Common Alarm (N/C), High Pressure Alarm (N/O), Low Pressure Alarm (N/O), Sensor Health (N/O), Pump 1 Health (N/O), Pump 2 Health (N/O).

• Optional Additional Volt Free Contacts: Low Pressure Warning (N/O), High Pressure Warning (N/O), Low Water In Break Tank (N/O), Low Additive In Holding Tank (N/O), Pump 1 Run For Topup (N/O), Pump 2 Run For Topup (N/O).

Purpose-built for heat pump systems and sealed heating circuits, the Flextherm PS Thermal Storage Buffer stores heated water to stabilise flow, smooth demand and cut compressor cycling.

Floor-standing steel construction with 90° opposed connections allows corner placement for a smaller footprint. Models up to 2000 Ltrs include height-adjustable feet for accurate levelling. Four G½" temperature sensor ports support precise control. Maximum operating temperature 95 °C.

• Heat-pump friendly: reduces start/stop frequency
• Compact install: 90° connections suit corner mounting
• Scalable: link multiple buffers for higher volume
• Serviceable: adjustable feet (≤ 2000 Ltrs) for easy levelling

Note: this PS variant is typically used for heating; for chilled applications with factory insulation specify Flextherm PSK.