Flamco

Achieve clean hydraulic separation with the Flexbalance EcoPlus C—a compact header that decouples primary and secondary circuits while simultaneously removing air and dirt in sealed LPHW/CHW systems.

By balancing flows and stripping entrained air/particles, EcoPlus C prevents pump overload, sharpens control accuracy and boosts heat transfer across the plant—delivering stable operation with minimal pressure loss.

• Hydraulic separation of primary/secondary circuits
• Integrated air & dirt separation for cleaner circuits
• No more overloaded pumps; reduces wear and noise
• Improved regulation and more consistent setpoint control
• Higher system output via better heat exchange
• Heat transfer level: up to 99%
• Low flow resistance for efficient pumping
• Compact form factor for easy plantroom integration

Achieve clean hydraulic separation with the Flexbalance EcoPlus C—a compact header that decouples primary and secondary circuits while simultaneously removing air and dirt in sealed LPHW/CHW systems.

By balancing flows and stripping entrained air/particles, EcoPlus C prevents pump overload, sharpens control accuracy and boosts heat transfer across the plant—delivering stable operation with minimal pressure loss.

• Hydraulic separation of primary/secondary circuits
• Integrated air & dirt separation for cleaner circuits
• No more overloaded pumps; reduces wear and noise
• Improved regulation and more consistent setpoint control
• Higher system output via better heat exchange
• Heat transfer level: up to 99%
• Low flow resistance for efficient pumping
• Compact form factor for easy plantroom integration

More compact, lighter, cleaner and more efficient

For total elimination of air from heating and cooling installations.
Air separators increase comfort and improve the yield. Air separators also offer benefits in the event of application in old systems or when an open system is converted to a closed system.

• Increases comfort and yield.
• The removal of air from the system water extends the service life of pumps, control equipment and other system accessories

The Flamcovent Smart air separators remove even the smallest microbubbles from the system water. They are virtually maintenance-free and the flow resistance is negligibly low.

• 60% better performance compared to conventional separators
• Flow velocity up to 3 m/s
• can be utilised with all kinds of pipework
• Compact dimensions, Light weight
• Extremely low flow resistance and low loss of energy
• Consistent performance throughout its service life

Flamco (est. 1956) is a Dutch manufacturer of HVAC and plumbing system components, including expansion vessels, air separators and pressurisation accessories. Their ranges are used in heating and chilled-water circuits and potable water systems across domestic and commercial installations.

More compact, lighter, cleaner and more efficient

For use in sealed heating and cooling systems. Air and dirt separators protect the boilers, pumps and fittings from damage caused by the deposit of dirt particles, increase comfort and improve the yield. Air and dirt separators also offer benefits in the event of application in old systems or when an open system is converted to a closed system.

• Increases comfort and yield.
• Prevents deposit of dirt particles in the boiler
• The removal of air and dirt from the system water extends the servive life of pump, control equipment and other system accessories.

The Flamcovent Clean Smart air and dirt separators remove even the smallest microbubbles and minuscule dirt particles from the system water. They are virtualy maintenance-free and the flow resistance is negligibly low.

• 60% better performance compared to conventional separators
• Flow velocity up to 3 m/s
• Four neodynium magnets are incorporated into the logo
• can be utilised with all kinds of pipework.
• Compact dimensions, light weight
• Extremely low flow resitance and low loss of energy
• Consistent performance throughout its service life.

Flamco (est. 1956) is a Dutch manufacturer of HVAC and plumbing system components, including expansion vessels, air separators and pressurisation accessories. Their ranges are used in heating and chilled-water circuits and potable water systems across domestic and commercial installations.

Dose system chemicals cleanly with the Flamco Mild Steel Dosing Pot—a welded mild-steel assembly that lets you introduce inhibitors, biocides or antifreeze in a controlled, safe way for sealed LPHW and CHW systems.

Supplied fully assembled with tundish, vessel, air vent, inlet, outlet and drain valves, it's simple to install and operate. An internally uncoated finish ensures compatibility with standard water-treatment chemicals.

• Plug-and-play: shipped ready to fit
• Easy dosing: controlled chemical introduction
• Protects plant: improves efficiency and extends system life
• Robust build: mild-steel, welded construction

Set-and-go pressure control for sealed systems: the Digifiller is a wall-mounted digital pressurisation unit with an electronic pressure transducer and microprocessor control for precise, reliable top-up.

Delivering up to 12 L/min via a 4 Ltrs internal break tank, it ships pre-commissioned with factory preset delivery pressures of 0.5, 1.0, 1.5 or 2.0 Bar (fully adjustable on site in 0.1 Bar steps). A self-bleed pump, system fill mode and password-protected menus make setup fast and foolproof.

• Category 5 protection (Type AB weir overflow)
• MODBUS RTU integration for BMS connectivity
• Plug & play presets; easily reconfigured on site
• White powder-coat finish (RAL 9003)

Ideal for commercial, industrial and large domestic plant rooms (guide volume ≤ 50,000 Ltrs).

For mounting Flexcon expansion vessels (2 - 25 litres) to a wall. With the Flexconsole the Flexcon vessel is set up vertically fitted to the water connection with the water nipple fitted on the ¾" connection of the console and the expansion pipe fitted to the ½" connection.

Flamco (est. 1956) is a Dutch manufacturer of HVAC and plumbing system components, including expansion vessels, air separators and pressurisation accessories. Their ranges are used in heating and chilled-water circuits and potable water systems across domestic and commercial installations.

Built for sealed LPHW/CHW systems, this Flexconsole Wall Mounting For Flexcon Expansion Vessel delivers reliable performance with a tidy, installer'friendly form.

Engineered for day'to'day plantroom demands, it helps maintain stable operation, protects equipment, and simplifies maintenance.

• Reliable absorption of system expansion
• Factory pre-charge for quick commissioning
• Durable diaphragm construction

Pair with suitable isolation, safety devices and treatment to meet site requirements and best practice.

Built for closed-loop heating and cooling circuits, this Flamcovent Lean Smart 1 Air & Dirt Separator delivers reliable performance with a tidy, installer'friendly form.

More compact, lighter, cleaner and more efficient
For use in sealed heating and cooling systems.

Air and dirt separators protect the boilers, pumps and fittings from damage caused by the deposit of dirt particles, increase comfort and improve the yield.

Air and dirt separators also offer benefits in the event of application in old systems or when an open system is converted to a closed system.

Increases comfort and yield.

Prevents deposit of dirt particles in the boiler.

Engineered for day'to'day plantroom demands, it helps maintain stable operation, protects equipment, and simplifies maintenance.

• Combines air & dirt separation
• Boosts system efficiency and reduces noise
• Helps protect pumps and valves

Pair with suitable isolation, safety devices and treatment to meet site requirements and best practice.

Built for closed heating and chilled water systems requiring inhibitor dosing, this Mild Steel Dosing Pot delivers reliable performance with a tidy, installer'friendly form.

Engineered for day'to'day plantroom demands, it helps maintain stable operation, protects equipment, and simplifies maintenance.

• Robust mild-steel construction
• Safe chemical dosing point
• Clear isolation and purge process

Pair with suitable isolation, safety devices and treatment to meet site requirements and best practice.

Built for sealed LPHW/CHW systems, this Airfix Expansion Vessel delivers reliable performance with a tidy, installer'friendly form.

For use in potable water, or fresh-water installations.

The Airfix D expansion vessels operate in such a way that the water flows right through and they are continuously flushed with fresh water from the mains.

This prevents tepid, stagnant water from collecting in the vessel in which bacterial growth could occur.

Therefore, users can be assured of high quality potable water.

Applying an Airfix D expansion vessel to a water heater prevents the opening of the safety group or safety valve each time the potable water is heated.

Engineered for day'to'day plantroom demands, it helps maintain stable operation, protects equipment, and simplifies maintenance.

• Reliable absorption of system expansion
• Factory pre-charge for quick commissioning
• Durable diaphragm construction

Pair with suitable isolation, safety devices and treatment to meet site requirements and best practice.

Built for sealed LPHW/CHW systems, this Flexcon Premium 12 Expansion Vessel delivers reliable performance with a tidy, installer'friendly form.

Engineered for day'to'day plantroom demands, it helps maintain stable operation, protects equipment, and simplifies maintenance.

• Reliable absorption of system expansion
• Factory pre-charge for quick commissioning
• Durable diaphragm construction

Pair with suitable isolation, safety devices and treatment to meet site requirements and best practice.

Built for boiler room and plantroom installations, this FLexcon KSG Boiler Connection Assembly delivers reliable performance with a tidy, installer'friendly form.

Engineered for day'to'day plantroom demands, it helps maintain stable operation, protects equipment, and simplifies maintenance.

• Neat, secure wall installation
• Sized for the correct connections
• Speeds up tidy plantroom builds

Pair with suitable isolation, safety devices and treatment to meet site requirements and best practice.

Developed for sealed heating and chilled water plant requiring automatic top-up, this Digifiller 1.0 Digital Filler Unit delivers reliable performance with a tidy, installer'friendly form.

Compact and totally enclosed digital pressurisation units with electronic pressure transducer and user-friendly microprocessor for use on sealed system in order to provide a minimum system pressure requirement.

The Digifiller is a wall-mounted, flow rate (up to 12 l/min) top-up pressurisation unit with 4 litre internal break tank.

Self venting pumps and preset options to remove the need for conventional commissioning of the Pressurisation Unit.

Ideal for Industrial, commercial or large domestic applications.

Available preset to 0.5 bar, 1.0 bar, 1.5 Bar.

Engineered for day'to'day plantroom demands, it helps maintain stable operation, protects equipment, and simplifies maintenance.

• Digital control and monitoring
• Automatic cold-fill top-up
• Compact wall-mounted format

Pair with suitable isolation, safety devices and treatment to meet site requirements and best practice.

Developed for sealed heating and chilled water plant requiring automatic top-up, this Twin System 2 X 125D Digital Pressurisation Unit delivers reliable performance with a tidy, installer'friendly form.

Compact and totally enclosed digital pressurisation units with electronic pressure transducer and user-friendly microprocessor for use on sealed system in order to provide a minimum system pressure requirement.

The Flexfiller Twin System is a floor standing unit, ideal where space restrictions make it beneficial to locate two systems in a single enclosure.

The system combines two high flow rate (<18 l/min) top-up pressurisation units and two controllers with a single 18 litre break tank.

Engineered for day'to'day plantroom demands, it helps maintain stable operation, protects equipment, and simplifies maintenance.

• Digital control and monitoring
• Automatic cold-fill top-up
• Compact wall-mounted format

Pair with suitable isolation, safety devices and treatment to meet site requirements and best practice.

Developed for sealed heating and chilled water plant requiring automatic top-up, this Twin System 2 X 225D Digital Pressurisation Unit delivers reliable performance with a tidy, installer'friendly form.

Engineered for day'to'day plantroom demands, it helps maintain stable operation, protects equipment, and simplifies maintenance.

• Digital control and monitoring
• Automatic cold-fill top-up
• Compact wall-mounted format

Pair with suitable isolation, safety devices and treatment to meet site requirements and best practice.