Lowara BG Pumps are Self-priming close-coupled centrifugal pumps with built-in ejector system, engineered to remain primed even in the presence of water-dissolved gases. This product is manufactured by Lowara. The extensive use of pressed Stainless Steel ensures a high-performance, durable and lightweight pump.

Appropriate for use with drinking water.

The Lowara BG is a small self-priming pump range with a built-in ejector system.

The Lowara BGM9/A 0.9KW 220/240 50 Centrifugal Pump - Single Phase - Obsolete is a Centrifugal Pump item. Voltage for this item is 230V. It has an actual flow rate of 65 Ltr/min. The maximum head for this pump is 49.6m. This is a Surface Mounted pump which can be suitable when the pump can sit in a dry, accessible location and draw liquid in via a suction pipe or hose.

Lowara BG Pumps are Self-priming close-coupled centrifugal pumps with built-in ejector system, engineered to remain primed even in the presence of water-dissolved gases. This product is manufactured by Lowara. The extensive use of pressed Stainless Steel ensures a high-performance, durable and lightweight pump.

Appropriate for use with drinking water.

The Lowara BG is a small self-priming pump range with a built-in ejector system.

The Lowara BGM11/A 1.1KW 220/240 50 Centrifugal Pump - Single Phase - Obsolete is a Centrifugal Pump item. Voltage for this item is 230V. It has an actual flow rate of 70 Ltr/min. The maximum head for this pump is 53.2m. This is a Surface Mounted pump which can be suitable when the pump can sit in a dry, accessible location and draw liquid in via a suction pipe or hose.

Lowara BG Pumps are Self-priming close-coupled centrifugal pumps with built-in ejector system, engineered to remain primed even in the presence of water-dissolved gases. This product is manufactured by Lowara. The extensive use of pressed Stainless Steel ensures a high-performance, durable and lightweight pump.

Appropriate for use with drinking water.

The Lowara BG is a small self-priming pump range with a built-in ejector system.

The Lowara BG3/A 0.37KW 380/415 50 Centrifugal Pump - 3 Phase is a Centrifugal Pump item. Voltage for this item is 230V. It has an actual flow rate of 50 Ltr/min. The maximum head for this pump is 36.9m. This is a Surface Mounted pump which can be suitable when the pump can sit in a dry, accessible location and draw liquid in via a suction pipe or hose.

Lowara BG Pumps are Self-priming close-coupled centrifugal pumps with built-in ejector system, engineered to remain primed even in the presence of water-dissolved gases. This product is manufactured by Lowara. The extensive use of pressed Stainless Steel ensures a high-performance, durable and lightweight pump.

Appropriate for use with drinking water.

The Lowara BG is a small self-priming pump range with a built-in ejector system.

The Lowara BG5/A 0.55KW 380/415 50 Centrifugal Pump - 3 Phase is a Centrifugal Pump item. Voltage for this item is 230V. It has an actual flow rate of 60 Ltr/min. The maximum head for this pump is 40.2m. This is a Surface Mounted pump which can be suitable when the pump can sit in a dry, accessible location and draw liquid in via a suction pipe or hose.

Replaced by the PSD 24 Litre Booster Package Set 240V

Designed to provide a pressurised water supply from a break tank in either a positive or negative head application. CH multi-stage Boostamatic pumps are self priming up to 5 metres and do not rely on a gravity flow of water to activate.

With flow rates up to 160 litres/minute and heads up to 62 metres, these pumps are suitable for commercial or domestic use, pumping hot or cold water and are supplied with G 1 flexible hoses and adaptors.

The CH 4 B range of pumps are the ideal base pump for pressure boosting sets or for applications where long pipe runs or high heads may be involved

Suitable for domestic or commercial use, pumping hot or cold water

Features:

• Flow rates up to 138 litres per minute and heads up to 64 metres 
• Fully automatic control 
• No pulsing during operation 
• Durable brass and Stainless Steel construction 
• multi-stage centrifugal pump 
• Extended life mechanical seal 
• Quiet operation 
• WRAS Approved Product 
• Continuously rated induction motor 
• Self priming up to 5 metres 
• Dry run protection 
• G 1 Flexible hoses included 
• 2 year guarantee

Designed to provide a pressurised water supply from a break tank in either a positive or negative head application. CH multi-stage Boostamatic pumps are self priming up to 5 metres and do not rely on a gravity flow of water to activate.

With flow rates up to 160 litres/minute and heads up to 62 metres, these pumps are suitable for commercial or domestic use, pumping hot or cold water and are supplied with G 1 flexible hoses and adaptors.

The CH 4 B range of pumps are the ideal base pump for pressure boosting sets or for applications where long pipe runs or high heads may be involved

Suitable for domestic or commercial use, pumping hot or cold water

Features:

• Flow rates up to 138 litres per minute and heads up to 64 metres 
• Fully automatic control 
• No pulsing during operation 
• Durable brass and Stainless Steel construction 
• multi-stage centrifugal pump 
• Extended life mechanical seal 
• Quiet operation 
• WRAS Approved Product 
• Continuously rated induction motor 
• Self priming up to 5 metres 
• Dry run protection 
• G 1 Flexible hoses included 
• 2 year guarantee

Centrifugal Horizontal Unit multi-stage

Intended to provide a pressurised liquid supply from a break tank in either a positive or negative head application. STUART CH4-50 B multi-stage Boostamatic pumps are self priming up to 5 metres and do not rely on a gravity flow of water to activate. With flow rates up to 135 litres/minute and heads up to 51 metres, these pumps are suitable for commercial or domestic use, pumping hot or cold water and are supplied with G1 flexible hoses and adaptors.

Centrifugal Horizontal Unit multi-stage

Intended to provide a pressurised liquid supply from a break tank in either a positive or negative head application. STUART CH4-60 B multi-stage Boostamatic pumps are self priming up to 5 metres and do not rely on a gravity flow of water to activate. With flow rates up to 157 litres/minute and heads up to 64 metres, these pumps are suitable for commercial or domestic use, pumping hot or cold water and are supplied with G1 flexible hoses and adaptors.

Centrifugal Horizontal Unit multi-stage

STUART CH4-60 FL pumps are optimal for water pressurisation to outlets in a positive head application, where an instant boosted supply is required from a simple to install package. CH Automatic Flow Switch pumps require a gravity flow of 1 litre/minute to operate and are suitable for commercial or domestic use, pumping hot or cold water at flow rates up to 148 litres per minute and heads up to 62 metres.

The Clarke - SPE800 Self Priming Pump - 1 inch - 230V Clarke SPE800 Self Priming Pump - 1 inch - 230V is a robust and dependable selfpriming pump, engineered with power and efficiency in mind.

The Jabsco Mini Puppy Self-Priming Pump - 24v is a Self Priming item. This product is manufactured by Jabsco. Voltage for this item is 24V. It has an actual flow rate of 7.4 Ltr/min. This is a Surface Mounted pump which can be suitable when the pump can sit in a dry, accessible location and draw liquid in via a suction pipe or hose.

The operating pressure of this is 2 bar.

Connections: - for 25mm (1") bore hose or ½" BSP
Dimensions: - 195mm long, 120mm wide, 75mm high
Fuse Size: - 10 amp
Output: - up to 32 litres/minute (6.5 gallons/minute)
Medium duty, continuously rated bilge and deckwash pump
Self-priming up to 1.2m vertical lift
Simple, fully serviceable design with few wearing parts

The Jabsco Water Puppy Self-Priming Pump - 24v is a Self Priming item. This product is manufactured by Jabsco. Voltage for this item is 24V. It has an actual flow rate of 32 Ltr/min. This is a Surface Mounted pump which can be suitable when the pump can sit in a dry, accessible location and draw liquid in via a suction pipe or hose.

Connections: - for 25mm (1³) bore hose or 1/2" BSP

Dimensions: - 220mm long, 120mm wide, 85mm high

Fuse Size: - 25(amp)

Output: - up to 45 litres/minute (10 gallons/minute).

High capacity, continuously rated bilge pump Self priming up to 2.4m vertical lift Simple, fully serviceable design with few wearing parts

Can generate pressures up to 1 bar. (15 psi)

Bronze body, Stainless Steel shaft

Packaged Dimensions: L:28.00 x H:13.00 x W:15.00cm

The Jabsco Maxi Puppy Self-Priming Pump -12v is a Self Priming item. This product is manufactured by Jabsco. Voltage for this item is 12V. It has an actual flow rate of 45 Ltr/min. This is a Surface Mounted pump which can be suitable when the pump can sit in a dry, accessible location and draw liquid in via a suction pipe or hose.

The operating pressure of this is 1 bar.