Rapid self-priming up to 3 metres vertical lift.

Handles hard and soft solids up to 8mm in size.

Can pump up to 90% entrained air.

Up to 30 minutes dry running protection.

Quick and simple to maintain

Light, compact, portable and tough

The Jabsco Utility 80' 1½" Self-Priming Flexible Impeller Pump 230v is a Utility Pump item. This product is manufactured by Jabsco. Voltage for this item is 230V. It has an actual flow rate of 80 Ltr/min. The maximum head for this pump is 20m.

The Jabsco Utility 40' 1" Self-Priming Flexible Impeller Pump 400v is a Utility Pump item. This product is manufactured by Jabsco. Voltage for this item is 400V. It has an actual flow rate of 35 Ltr/min. The maximum head for this pump is 3m.

The Clarke - BPT 600 Water Pressure Boosting Pump - 230V Clarke BPT 600 Water Pressure Boosting Pump - 230v is a robust and dependable submersible pump, engineered with power and efficiency in mind.

Jet Unit

Optimal for the elevated pressure delivery of clean non-potable water from a water tank/cistern, such as water pressurisation and lawn sprinklers. Jet pumps will self prime up to 5 metres and are supplied with a carry handle, a manual on/off switch and power lead fitted with a 13 Amp fused plug. The range is suitable for general purpose use, pumping cold water.

Jet Unit

Optimal for the elevated pressure delivery of clean non-potable water from a water tank/cistern in either a positive or negative head application. Jet Boostamatic pumps provide fully automatic pressure/flow switch control, will self prime up to 5 metres and are supplied with a power lead fitted with a 13 Amp fused plug.
The range is suitable for general purpose use, pumping cold water.

Rapid self-priming up to 3 m vertical lift
Will handle hard and soft solids
Can pump up to 90% entrained air
10 minute dry run protection
Light, compact, portable and tough
Fitted with thermal overload cut-out
33 LPM and 80 LPM models fitted with continously rated motors
316 Stainless Steel shafts with Carbon / Ceramic mechanical seals
Will pump liquids with viscosity <150>
Quick and easy to maintain

The Jabsco Utility 80' 1 1/2" Self-Priming Flexible Impeller Pump 400v is a Utility Pump item. This product is manufactured by Jabsco. Voltage for this item is 400V. It has an actual flow rate of 80 Ltr/min..

Includes

Faster refuelling - 50 litres/minute (13 GPM)

High head capability - 10 metres (32 feet)

Self priming up to 3 metres (9.6 feet)

Continuously rated*

Vibration tested

IP55 protected motor

24V version with thermal cut-out protection

Typical Applications:

Engineered for refuelling medium sizes diesel powered vehicles [typical tank sizes 200 - 500 litres (50 - 200 gallons)] from drums.

Appropriate for mounting to the following equipment: Excavators, Cranes, Road rollers (compactors), Pavers, Agricultural machines, Generators, Helicopters.

The Jabsco Fuel Pump - VR050-1122 - Obsolete is a Self Priming item. This product is manufactured by Jabsco. Voltage for this item is 24V. It has an actual flow rate of 50 Ltr/min. The maximum head for this pump is 10m.

The Jabsco Self-Priming Diesel Transfer Pump - VR100-1122 - Obsolete is a Self Priming item. This product is manufactured by Jabsco. Voltage for this item is 24V. It has an actual flow rate of 100 Ltr/min. The maximum head for this pump is 15m.

The Clarke - SPE1200 Self Priming Stainless Steel Pump - 230V

This robust Stainless Steel pump is built for home or general industrial use thanks to the self priming design and corrosion & rust resistant construction.

The Pedrollo JSWM-2C-M Self Priming JET Electro Pump is designed for use with clean water and liquids that are not chemically aggressive to the materials of construction.

Mono CMM is a progressing cavity pump series commonly selected for wastewater and general industrial applications requiring consistent flow (variant dependent).

The J series self-priming centrifugal pumps are for applications where the main feature is the difficulty in priming: even with suction heights of several meters the machine
quickly evacuates the air from the suction pipe and starts pumping. This product is manufactured by Varisco. Furthermore, compared to other pumps, the semi-open impeller makes the J appropriate for pumping
liquids with solids in suspension.

Applications
Varisco S.p.A. has a long-standing experience in designing and producing self-priming pumps and now has a wide range of solutions and materials. The J have includes that
not only meet the needs of the market but make it an extremely versatile product

Drainage of excavations, canals and ponds
Ground water dewatering with wellpoint systems
Sewage by-pass
Naval platforms ballasting
Drainage after flooding or terrential rains

Benefits:

Rapid self-priming
without foot valve up to a height of 7.5 m (24.5 ft)

High resistance
to abrasive liquids and turbid sandy waters

Semi-open impeller
solids handling up to 25 mm (1")

Wear plate
Easily replaceable Cast Iron wear plate, front to the impeller

Easy maintenance
removable front cover for direct access to the impeller and eventual unclogging

Connections
Suction at only 0,2 m (0.7 ft) from ground level

The Varisco JE 3-240 G11 FT20 Self-Priming Pump - 18.5KW - 3ph is a Self Priming Pump item. This is a Surface Mounted pump which can be suitable when the pump can sit in a dry, accessible location and draw liquid in via a suction pipe or hose.

The Jabsco Industrial Diaphragm Pump - 24v is a Self-Priming item. This product is manufactured by Jabsco. Voltage for this item is 24V. It has an actual flow rate of 12 Ltr/min..

Lowara BG Pumps are Self-priming close-coupled centrifugal pumps with built-in ejector system, engineered to remain primed even in the presence of water-dissolved gases. This product is manufactured by Lowara. The extensive use of pressed Stainless Steel ensures a high-performance, durable and lightweight pump.

Appropriate for use with drinking water.

The Lowara BG is a small self-priming pump range with a built-in ejector system.

The Lowara BGM5/C E2 0.55 220/240 50 Centrifugal Pump - Single Phase is a Centrifugal Pump item. Voltage for this item is 240V. It has an actual flow rate of 60 Ltr/min. The maximum head for this pump is 40.2m. This is a Surface Mounted pump which can be suitable when the pump can sit in a dry, accessible location and draw liquid in via a suction pipe or hose.