The Sacemi AU63-1/2-3 Gamar Tank Mounted Pump - 13 Ltr/min. is a Tank Mounted Pump item. It has an actual flow rate of 13 Ltr/min. This is a Surface Mounted pump which can be suitable when the pump can sit in a dry, accessible location and draw liquid in via a suction pipe or hose.

Spare motor for high-efficiency pumps Wilo-Yonos MAXO/-D in the event of replacement.

Complete functional unit with drive motor, impeller and electronics module.

The functional equipment is equivalent to that of the pump.

Scope of delivery

Wilo - spare motor, Accessories kit (O-ring, 4 motor fastening screws), and Installation manual and operating instructions.

Single-stage glanded centrifugal pump in monobloc design for installation on a base including foot on the pump housing.

Low-oscillation and low-noise monobloc design with lantern and rigidly connected standard motor.

With force-flushed, bidirectional bellows mechanical seal (from 37kW/4-pole, optionally available with a cartridge mechanical seal in back pull-out design for mechanical seal replacement without dismantling the motor) and cavitation-reducing impeller.

Flange with R1/8 pressure measuring connections. All grey Cast Iron components are cataphoretic-coated.

Pumps with motors ≥5.5KW are equipped as standard with a PTC thermistor sensor for motor protection.

The motor terminal box ≤ 7.5 KW can be made of metal or plastic. If a metal terminal box is absolutely necessary, please order the appropriate special variant. The motor terminal boxes > 7.5 KW are always made of metal.

The Jabsco SK416-0003 Service Kit is a Spares item.

Jabsco 14281-0001B Neoprene Impeller

The Jabsco 14281-0001B Neoprene Impeller is a Spares-Impeller item.

Jabsco (est. 1938) manufactures pumps for marine and industrial fluid handling. Their ranges include diaphragm pumps, flexible impeller pumps and washdown/bilge solutions. Typical applications cover freshwater pressure, bilge pumping, fuel or liquid transfer and general marine service duties.

Jabsco 14282-0001B Neoprene Impeller

The Jabsco 14282-0001B Neoprene Impeller is a Spares - Impeller item.

Jabsco (est. 1938) manufactures pumps for marine and industrial fluid handling. Their ranges include diaphragm pumps, flexible impeller pumps and washdown/bilge solutions. Typical applications cover freshwater pressure, bilge pumping, fuel or liquid transfer and general marine service duties.

Jabsco Motor Self Priming Pump Unit - 230v - Single Phase - BRZ MPU

The Jabsco Motor Self Priming Pump Unit - 230v - Single Phase - BRZ MPU is a Self-Priming item. This product is manufactured by Jabsco. Voltage for this item is 230V. It has an actual flow rate of 4.5 Ltr/min. This is a Surface Mounted pump which can be suitable when the pump can sit in a dry, accessible location and draw liquid in via a suction pipe or hose.

The operating pressure of this is 2 bar.

The Jabsco Bronze Flexible Impeller Pedestal Pump - 82 Ltr/min. - 18m Head - Bronze is a Self-Priming item. This product is manufactured by Jabsco. It has an actual flow rate of 82 Ltr/min. The maximum head for this pump is 18m.

The Jabsco Pumpguard Fresh Water Inlet Pump With Strainer - Threaded - 120mm. This product is manufactured by Jabsco. This is a Surface Mounted pump which can be suitable when the pump can sit in a dry, accessible location and draw liquid in via a suction pipe or hose.

Jabsco X4020-269B Replacement O-Ring - 2.4 X 69.6 (VIT)

The Jabsco X4020-269B Replacement O-Ring - 2.4 X 69.6 (VIT) - Obsolete is a Spares - O-Ring item.

Jabsco (est. 1938) manufactures pumps for marine and industrial fluid handling. Their ranges include diaphragm pumps, flexible impeller pumps and washdown/bilge solutions. Typical applications cover freshwater pressure, bilge pumping, fuel or liquid transfer and general marine service duties.

The Jabsco Self Priming Fuel Transfer Pump - Diesel - 50 Ltr/min. - 12v - Obsolete is a Fuel Transfer Pump item. This product is manufactured by Jabsco. Voltage for this item is 12V. It has an actual flow rate of 50 Ltr/min. This is a Surface Mounted pump which can be suitable when the pump can sit in a dry, accessible location and draw liquid in via a suction pipe or hose.

Jabsco Brass Hose Adaptor - ¾³ BSP to 1" Hose Bar.b for the 23540 and VR050 series.

The Jabsco Brass Hose Adaptor ¾³ BSP to 1" Hose Bar.b is a Hose Spares item.

Jabsco (est. 1938) manufactures pumps for marine and industrial fluid handling. Their ranges include diaphragm pumps, flexible impeller pumps and washdown/bilge solutions. Typical applications cover freshwater pressure, bilge pumping, fuel or liquid transfer and general marine service duties.

In-line pump with high energy efficiency with ECmotor of energy efficiency classIE5 in accordance with IEC60034-30-2, hydraulics with minimum efficiency index MEI≥0.4 and electronic power adjustment in glanded pump design. The pump is configured as a single-stage low-pressure centrifugal pump with flange connection and mechanical seal. The Yonos GIGA2.0-I has been predominantly designed for pumping heating water (acc. to VDI 2035), Cold water and water-glycol mixtures without abrasive substances in heating, air conditioning and cooling systems.

Design:

Unilift CC7 - A1

Grundfos Unilift CC pumps are single-stage submersible pumps with a low suction ability down to 3 mm water level. The pumps are designed for pumping rainwater and grey wastewater, e.g. from

The pumps are appropriate for both stationary and portable use. They are for self-operating operation. The pumps allow free passage of particles up to ¸10 mm.

The motor incorporates self-operating overload protection cutting out the motor in case of overload. When cooled to normal temperature, the motor restarts automatically.

Suitable for: Commercial wastewater, Domestic wastewater, Industrial wastewater treatment and reuse

Single phase, 0.5kW, WRAS approved horizontal multistage pump with 3 impellers and a 1" threaded discharge port.
The Lowara 3HM06S05M5HVBE is a single phase horizontal multistage pump with a 0.5KW motor. This product is manufactured by Lowara. The e-HM range are high efficiency horizontal multistage pumps frequently applied in water supply and pressure boosting, particularly in larger residential installations. They are manufactured from high quality Stainless Steel components to ensure a long service life and excellent reliability. Lowara use these pumps in their own range of booster sets, as do some other manufacturers. They are available with the Teknospeed variable speed drive for constant pressure control, as well as the simpler Genyo controller, pressure switch on/off controller or just as a simple pump.

The Lowara 1HM04P05M5HVBE Horizontal Multistage Pump - 240v - Single Phase is a Multistage pump. Voltage for this item is 240V.

Order the Biral A 12-1 from Pumpify and receive free standard delivery.

The Biral A 12-1 Circulator Pump - 230v is a Circulator Pump item. Voltage for this item is 230V. The maximum head for this pump is 4m. This is a Surface Mounted pump which can be suitable when the pump can sit in a dry, accessible location and draw liquid in via a suction pipe or hose.

The operating pressure of this is 10 bar.