Stuart Turner

Peripheral Horizontal Unit

The 0.75 HP PH 75 Cast Iron pump is intended for continuous operation at 5 litres/minute and above.

This compact, high performance pump delivers flow rates up to 49 litres per minute and heads up to 72 metres.

Applications

• PH ES CI peripheral pumps are engineered to pump clean water
• Other clean, non aggressive, non explosive liquids with similar characteristics to water may be pumped
• Please consult Stuart Turner Ltd for guidance

Peripheral Horizontal Unit

The 1.0 HP PH 95 Cast Iron pump is intended for continuous operation at 5 litres/minute and above.

This compact, high performance pump delivers flow rates up to 43 litres per minute and heads up to 97 metres.

Applications

• PH ES CI peripheral pumps are engineered to pump clean water
• Other clean, non aggressive, non explosive liquids with similar characteristics to water may be pumped
• Please consult Stuart Turner Ltd for guidance

Submersible Unit

Engineered to pump solids up to 5 mm and the transference of non foul water, the Supersub 230A is suitable for use with both clean and grey water. The pump features a Stainless Steel motor shell, is compact in design, easy to install and comes complete with an externally fitted floating switch and stepped hose connector.

Floating Switch

Floating switches are used to automatically management a pump when filling or emptying a liquid tank/cistern. 
They are simple to install and level control is easily achieved by setting the position of the adjustment weight along the float lead.
Available with 3 or 5 metre cable lengths.

The new Mainsboost VariQ offers a variable speed, intelligent, energy efficient and quiet water boosting pump.

The Mainsboost VariQ is designed to boost water performance from a cold water storage tank, roof tank or ground tank in domestic and light commercial applications and is ideal for many properties with up to 3 floors and up to 10 outlets in operation simultaneously.
Even if multiple outlets, showers and appliances are running at the same time, the speed of the pump will adjust automatically to meet demand without any noticeable drop in water pressure.

Key Product Features:

• Boosts Pressure Up To 5.5 bar.
• Boosts Flow Rate Up To 97 Litres Per Minute
• Variable Speed Intelligent Control
• Quiet Operation
• Illuminated Touch Screen and Control Panel
• Easy To Install and Commission
• Self Priming Up to 6 Metres
• Dry Run Protection
• Continuously Rated
• 2 Year Warranty

Stuart Turner 29044 UK ISO Hose Connection Kit.

Contains:

• 2 x Hoses
• 2 x Washers
• 2 x Fixings

Stuart Turner (est. 1906) is a UK manufacturer of water boosting and pressurisation systems. Their ranges include shower pumps, whole-house boosting sets and mains-pressure solutions. Typical applications are improving water pressure and flow in homes and light commercial buildings.

Mains Boost Unit

Where mains liquid pressurisation is less than 2.5 bar a Mainsboost Charger pump is the solution. Mainsboost Charger pumps will boost pressure up to 3.5 bar. when supplied in conjunction with Mainsboost steel or composite vessels and can be located remotely from the Mainsboost vessel without restricting performance. Mainsboost Charger wall mounted pumps are supplied within a noise reducing enclosure.

Mains Boost Unit

Where mains liquid pressurisation is less than 2.0 bar. a Mainsboost Charger pump is the solution. Mainsboost Charger pumps will boost pressure up to 3.5 bar. when supplied in conjunction with Mainsboost steel or composite vessels and can be located remotely from the Mainsboost vessel without restricting performance. Mainsboost Charger wall mounted pumps are supplied within a noise reducing enclosure.

Spare Part

Stuart Electrastream 9KW Titanium immersion element 2¼ BSP appropriate for pumps fitted with Ariston Primo hot liquid cylinders. Includes replacement 2¼" O-ring.

The Stuart Turner range of dosing pots are engineered to insert liquid chemicals, usually corrosion inhibitor or anti-freeze solutions, into closed heating or chilled water systems.

For concentration levels of themes chemicals please always consult the specific manufacturer's recommendations.

Stuart Turner Dosing Pots are suppoed as a kit of components which will need to be assembled as per the Configuration section of the Technical Documentation.

The dosing pot kit consists of:

• Fabricated vessel with welded construction
• 2 x wall brackets (integral with vessel)
• Manual air vent valve
• Tundish
• 4 x isolation valves
• 4 x pipe nipples
• 2 x tee piece

Features & Benefits:

• AISI 304 Stainless Steel fabricated vessel with welded construction and tundish
• 10 bar. maximum working pressure
• 90 degree C maximum operating temperature
• 2 x wall brackets integral vessel
• All pipe connections are 1" BSP
• Simple and safe to operate and flush clean
• All connections to the system can be isolated by the ball valves
• All dosingpots comply with the pressure equipment directive (PED) 2014/68/EU

The Stuart Turner range of dosing pots are engineered to insert liquid chemicals, usually corrosion inhibitor or anti-freeze solutions, into closed heating or chilled water systems.

For concentration levels of themes chemicals please always consult the specific manufacturer's recommendations.

Stuart Turner Dosing Pots are suppoed as a kit of components which will need to be assembled as per the Configuration section of the Technical Documentation.

The dosing pot kit consists of:

• Fabricated vessel with welded construction
• 2 x wall brackets (integral with vessel)
• Manual air vent valve
• Tundish
• 4 x isolation valves
• 4 x pipe nipples
• 2 x tee piece

Features & Benefits:

• AISI 304 Stainless Steel fabricated vessel with welded construction and tundish
• 10 bar. maximum working pressure
• 90 degree C maximum operating temperature
• 2 x wall brackets integral vessel
• All pipe connections are 1" BSP
• Simple and safe to operate and flush clean
• All connections to the system can be isolated by the ball valves
• All dosingpots comply with the pressure equipment directive (PED) 2014/68/EU

The Stuart Turner range of dosing pots are engineered to insert liquid chemicals, usually corrosion inhibitor or anti-freeze solutions, into closed heating or chilled water systems.

For concentration levels of themes chemicals please always consult the specific manufacturer's recommendations.

Stuart Turner Dosing Pots are suppoed as a kit of components which will need to be assembled as per the Configuration section of the Technical Documentation.

The dosing pot kit consists of:

• Fabricated vessel with welded construction
• 2 x wall brackets (integral with vessel)
• Manual air vent valve
• Tundish
• 4 x isolation valves
• 4 x pipe nipples
• 2 x tee piece

Features & Benefits:

• AISI 304 Stainless Steel fabricated vessel with welded construction and tundish
• 10 bar. maximum working pressure
• 90 degree C maximum operating temperature
• 2 x wall brackets integral vessel
• All pipe connections are 1" BSP
• Simple and safe to operate and flush clean
• All connections to the system can be isolated by the ball valves
• All dosingpots comply with the pressure equipment directive (PED) 2014/68/EU

The Stuart Turner range of dosing pots are engineered to insert liquid chemicals, usually corrosion inhibitor or anti-freeze solutions, into closed heating or chilled water systems.

For concentration levels of themes chemicals please always consult the specific manufacturer's recommendations.

Stuart Turner Dosing Pots are suppoed as a kit of components which will need to be assembled as per the Configuration section of the Technical Documentation.

The dosing pot kit consists of:

• Fabricated vessel with welded construction
• 2 x wall brackets (integral with vessel)
• Manual air vent valve
• Tundish
• 4 x isolation valves
• 4 x pipe nipples
• 2 x tee piece

Features & Benefits:

• AISI 304 Stainless Steel fabricated vessel with welded construction and tundish
• 10 bar. maximum working pressure
• 90 degree C maximum operating temperature
• 2 x wall brackets integral vessel
• All pipe connections are 1" BSP
• Simple and safe to operate and flush clean
• All connections to the system can be isolated by the ball valves
• All dosingpots comply with the pressure equipment directive (PED) 2014/68/EU

The Stuart Turner range of dosing pots are engineered to insert liquid chemicals, usually corrosion inhibitor or anti-freeze solutions, into closed heating or chilled water systems.

For concentration levels of themes chemicals please always consult the specific manufacturer's recommendations.

Stuart Turner Dosing Pots are suppoed as a kit of components which will need to be assembled as per the Configuration section of the Technical Documentation.

The dosing pot kit consists of:

• Fabricated vessel with welded construction
• 2 x wall brackets (integral with vessel)
• Manual air vent valve
• Tundish
• 4 x isolation valves
• 4 x pipe nipples
• 2 x tee piece

Features & Benefits:

• AISI 304 Stainless Steel fabricated vessel with welded construction and tundish
• 10 bar. maximum working pressure
• 90 degree C maximum operating temperature
• 2 x wall brackets integral vessel
• All pipe connections are 1" BSP
• Simple and safe to operate and flush clean
• All connections to the system can be isolated by the ball valves
• All dosingpots comply with the pressure equipment directive (PED) 2014/68/EU

Includes & Benefits:

The Stuart Turner Stainless Steel Dosing Pot -35 Ltr - 10 bar. is a Dosing Pot item.

The operating pressure of this is 10 bar.

The Stuart Turner range of dosing pots are engineered to insert liquid chemicals, usually corrosion inhibitor or anti-freeze solutions, into closed heating or chilled water systems.

For concentration levels of themes chemicals please always consult the specific manufacturer's recommendations.

Stuart Turner Dosing Pots are suppoed as a kit of components which will need to be assembled as per the Configuration section of the Technical Documentation.

The dosing pot kit consists of:

• Fabricated vessel with welded construction
• 2 x wall brackets (integral with vessel)
• Manual air vent valve
• Tundish
• 4 x isolation valves
• 4 x pipe nipples
• 2 x tee piece

Features & Benefits:

• AISI 304 Stainless Steel fabricated vessel with welded construction and tundish
• 10 bar. maximum working pressure
• 90 degree C maximum operating temperature
• 2 x wall brackets integral vessel
• All pipe connections are 1" BSP
• Simple and safe to operate and flush clean
• All connections to the system can be isolated by the ball valves
• All dosingpots comply with the pressure equipment directive (PED) 2014/68/EU