-
96878506
Grundfos - SEG.40.09.E.2.50B Submersible Sewage Grinder Pump - 415V - Three Phase - 266 Ltr/min. - Cast IronSEG.40.09.E.2.50B
Grundfos SEG grinder pumps are non-self-priming, single-stage, centrifugal pumps with horizontal discharge port, specifically designed for pumping wastewater containing discharge from toilets. The pump is equipped with a grinder system that grinds destructible solids into small pieces to lead them through pipes with a relatively small diameter. SEG grinder pumps are well-suited for use in sparsely populated areas, where gravity sewage systems are not available. Examples include villages, farm areas and areas with large terrain-level differences, where a pressurised system has advantages. The pump is available for two types of installation:
The pump is made of wear-resistant materials, such as Cast Iron and Stainless Steel. These materials ensure dependable operation. The surface of the pump is smooth to prevent dirt and impurities from sticking. The corrosion-protected Stainless Steel clamp is securing the motor to the pump housing and allow the straightforward service of the pump. SmartTrim system allows straightforward adjustment of the impeller clearance to ensure maximum efficiency during the pump lifespan. The range is designed to reduce energy consumption and keep downtime costs to a minimum, while maintaining peak performance throughout the lifespan of the system.- submerged installation, free-standing
- submerged installation on auto-coupling systems
Suitable for: Commercial wastewater, Domestic wastewater, Wastewater transport, Flood control
In stock
Free Standard Delivery
-
96878514
Grundfos - SEG.40.15.E.2.50B Submersible Sewage Grinder Pump - 415V - Three Phase -285 Ltr/min. - Cast IronSEG.40.15.E.2.50B
Grundfos SEG grinder pumps are non-self-priming, single-stage, centrifugal pumps with horizontal discharge port, specifically designed for pumping wastewater containing discharge from toilets. The pump is equipped with a grinder system that grinds destructible solids into small pieces to lead them through pipes with a relatively small diameter. SEG grinder pumps are well-suited for use in sparsely populated areas, where gravity sewage systems are not available. Examples include villages, farm areas and areas with large terrain-level differences, where a pressurised system has advantages. The pump is available for two types of installation:
The pump is made of wear-resistant materials, such as Cast Iron and Stainless Steel. These materials ensure dependable operation. The surface of the pump is smooth to prevent dirt and impurities from sticking. The corrosion-protected Stainless Steel clamp is securing the motor to the pump housing and allow the straightforward service of the pump. SmartTrim system allows straightforward adjustment of the impeller clearance to ensure maximum efficiency during the pump lifespan. The range is designed to reduce energy consumption and keep downtime costs to a minimum, while maintaining peak performance throughout the lifespan of the system.- submerged installation, free-standing
- submerged installation on auto-coupling systems
Suitable for: Commercial wastewater, Domestic wastewater, Wastewater transport, Flood control
In stock
Free Standard Delivery
-
99272543
Grundfos - TPE3 D 32-180 S-A-F-A-BQQE-EDC Twin Head In-Line Circulator Pump - 415V - Three Phase - 333 Ltr/min. - Cast IronTPE3 D 32-180 S-A-F-A-BQQE-EYC
Single-stage, close-coupled, volute twin-head Pump with in-line suction and discharge ports of identical diameter. The twin-head Pump is engineered with two parallel power-heads. The Pump is of the top-pull-out design, i.e. the power head (motor, Pump head and impeller) can be removed for maintenance or service while the Pump housing remains in the pipework. Each power head is equipped with an unbalanced rubber bellows seal. The shaft seal is according to EN 12756. Pipework connection is via PN 6/10 DIN flanges (EN 1092-2 and ISO 7005-2). Each power head is equipped with a fan-cooled, permanent-magnet synchronous motor of identical size. Each power head is equipped with a fan-cooled asynchronous motor of indentical size. The motor performance is classified as IE5 in accordance with IEC 60034-30-2. The motor includes a frequency converter and PI controller in the motor terminal box. This enables continuously variable management of the motor speed, which again enables adaptation of the output to a given requirement. The Pump is equipped with temperature- and differential pressure sensors.
- Suitable for Commercial heating, Commercial air conditioning, District heating, District cooling, Industrial heating, Industrial cooling, Desalination, Drinking water treatment, Water distribution, Irrigation, Community water supply
- This product's housing material is Cast Iron
- The impeller is manufactured from Composite
- Maximum operating pressure: 10 Bar.
- Temperature liquid range: -25 .. 120 °C.
In stock
Free Standard Delivery
-
99272215
Grundfos - TPE3 50-120 S-A-F-A-BQQE-EDB Variable Speed In-Line Circulator Pump - 415V - Three Phase - 633 Ltr/min. - Cast IronTPE3 50-120 S-A-F-A-BQQE-EYB
Single-stage, close-coupled, volute Pump with in-line suction and discharge ports of identical diameter. The Pump is of the top-pull-out design, i.e. the power head (motor, Pump head and impeller) can be removed for maintenance or service while the Pump housing remains in the pipework. The shaft seal is according to EN 12756. Pipework connection is via PN 6/10 DIN flanges (EN 1092-2 and ISO 7005-2). The Pump is equipped with a fan-cooled, permanent-magnet synchronous motor. The Pump is equipped with a fan-cooled asynchronous motor. The motor performance is classified as IE5 in accordance with IEC 60034-30-2. The motor includes a frequency converter and PI controller in the motor terminal box. This enables continuously variable management of the motor speed, which again enables adaptation of the output to a given requirement. The Pump is equipped with temperature- and differential pressure sensors.
- Suitable for Commercial heating, Commercial air conditioning, District heating, District cooling, Industrial heating, Industrial cooling, Desalination, Drinking water treatment, Water distribution, Irrigation, Community water supply
- This product's housing material is Cast Iron
- The impeller is manufactured from Composite
- Maximum operating pressure: 10 Bar.
- Temperature liquid range: -25 .. 120 °C.
In stock
Free Standard Delivery
-
96878513
Grundfos - SEG.40.12.E.EX.2.50B Submersible Sewage Grinder Pump - 415V - Three Phase - 285 Ltr/min. - Cast IronSEG.40.12.E.EX.2.50B
Grundfos SEG grinder pumps are non-self-priming, single-stage, centrifugal pumps with horizontal discharge port, specifically designed for pumping wastewater containing discharge from toilets. The pump is equipped with a grinder system that grinds destructible solids into small pieces to lead them through pipes with a relatively small diameter. SEG grinder pumps are well-suited for use in sparsely populated areas, where gravity sewage systems are not available. Examples include villages, farm areas and areas with large terrain-level differences, where a pressurised system has advantages. The pump is available for two types of installation:
The pump is made of wear-resistant materials, such as Cast Iron and Stainless Steel. These materials ensure dependable operation. The surface of the pump is smooth to prevent dirt and impurities from sticking. The corrosion-protected Stainless Steel clamp is securing the motor to the pump housing and allow the straightforward service of the pump. SmartTrim system allows straightforward adjustment of the impeller clearance to ensure maximum efficiency during the pump lifespan. The range is designed to reduce energy consumption and keep downtime costs to a minimum, while maintaining peak performance throughout the lifespan of the system. The pump is explosion-proof.- submerged installation, free-standing
- submerged installation on auto-coupling systems
Suitable for: Commercial wastewater, Domestic wastewater, Wastewater transport, Flood control
In stock
Free Standard Delivery
-
99114626
Grundfos - TPED 80-150/4 A-F-A-BQQE-JDA Twin Head In-Line Circulator Pump - 415V - Three Phase - 1150 Ltr/min. - Cast IronTPED 80-150/4 A-F-A-BQQE-JWA
Single-stage, close-coupled, volute twin-head pump unit with in-line suction and discharge ports of identical diameter. The twin-head pump is designed with two parallel power-heads. The pump is of the top-pull-out design, i.e. the power head (motor, pump head and impeller) can be removed for maintenance or service while the pump housing remains in the pipework. Each power head is fitted with an unbalanced rubber bellows seal. The shaft seal is according to EN 12756. All pipework connection is via PN 16 DIN flanges (EN 1092-2 and ISO 7005-2). Each power head is fitted with a fan-cooled, permanent-magnet synchronous motor of identical size. Each power head is fitted with a fan-cooled asynchronous motor of indentical size. The motor efficiency is classified as IE5 in accordance with IEC 60034-30-2.
Suitable for: Commercial air conditioning
In stock
Free Standard Delivery
-
99272260
Grundfos - TPE3 50-200 S-A-F-A-BQQE-HAC Variable Speed In-Line Circulator Pump - 240V - Single Phase - 834 Ltr/min. - Cast IronTPE3 50-200 S-A-F-A-BQQE-HYC
Single-stage, close-coupled, volute Pump with in-line suction and discharge ports of identical diameter. The Pump is of the top-pull-out design, i.e. the power head (motor, Pump head and impeller) can be removed for maintenance or service while the Pump housing remains in the pipework. The shaft seal is according to EN 12756. Pipework connection is via PN 6/10 DIN flanges (EN 1092-2 and ISO 7005-2). The Pump is equipped with a fan-cooled, permanent-magnet synchronous motor. The Pump is equipped with a fan-cooled asynchronous motor. The motor performance is classified as IE5 in accordance with IEC 60034-30-2. The motor includes a frequency converter and PI controller in the motor terminal box. This enables continuously variable management of the motor speed, which again enables adaptation of the output to a given requirement. The Pump is equipped with temperature- and differential pressure sensors.
- Suitable for Commercial heating, Commercial air conditioning, District heating, District cooling, Industrial heating, Industrial cooling, Desalination, Drinking water treatment, Water distribution, Irrigation, Community water supply
- This product's housing material is Cast Iron
- The impeller is manufactured from Composite
- Maximum operating pressure: 10 Bar.
- Temperature liquid range: -25 .. 120 °C.
In stock
Free Standard Delivery
-
99272217
Grundfos - TPE3 50-180 S-A-F-A-BQQE-GDC Variable Speed In-Line Circulator Pump - 415V - Three Phase - 750 Ltr/min. - Cast IronTPE3 50-180 S-A-F-A-BQQE-GYC
Single-stage, close-coupled, volute Pump with in-line suction and discharge ports of identical diameter. The Pump is of the top-pull-out design, i.e. the power head (motor, Pump head and impeller) can be removed for maintenance or service while the Pump housing remains in the pipework. The shaft seal is according to EN 12756. Pipework connection is via PN 6/10 DIN flanges (EN 1092-2 and ISO 7005-2). The Pump is equipped with a fan-cooled, permanent-magnet synchronous motor. The Pump is equipped with a fan-cooled asynchronous motor. The motor performance is classified as IE5 in accordance with IEC 60034-30-2. The motor includes a frequency converter and PI controller in the motor terminal box. This enables continuously variable management of the motor speed, which again enables adaptation of the output to a given requirement. The Pump is equipped with temperature- and differential pressure sensors.
- Suitable for Commercial heating, Commercial air conditioning, District heating, District cooling, Industrial heating, Industrial cooling, Desalination, Drinking water treatment, Water distribution, Irrigation, Community water supply
- This product's housing material is Cast Iron
- The impeller is manufactured from Composite
- Maximum operating pressure: 10 Bar.
- Temperature liquid range: -25 .. 120 °C.
In stock
Free Standard Delivery
-
96075902
Grundfos - SEG.40.12.EX.2.1.502 Submersible Sewage Grinder Pump - 240V - Single Phase - 285 Ltr/min. - Cast IronSEG.40.12.EX.2.1.502
Grundfos SEG grinder pumps are non-self-priming, single-stage, centrifugal pumps with horizontal discharge port, specifically designed for pumping wastewater containing discharge from toilets. The pump is equipped with a grinder system that grinds destructible solids into small pieces to lead them through pipes with a relatively small diameter. SEG grinder pumps are well-suited for use in sparsely populated areas, where gravity sewage systems are not available. Examples include villages, farm areas and areas with large terrain-level differences, where a pressurised system has advantages. The pump is available for two types of installation:
The pump is made of wear-resistant materials, such as Cast Iron and Stainless Steel. These materials ensure dependable operation. The surface of the pump is smooth to prevent dirt and impurities from sticking. The corrosion-protected Stainless Steel clamp is securing the motor to the pump housing and allow the straightforward service of the pump. SmartTrim system allows straightforward adjustment of the impeller clearance to ensure maximum efficiency during the pump lifespan. The range is designed to reduce energy consumption and keep downtime costs to a minimum, while maintaining peak performance throughout the lifespan of the system. The pump is explosion-proof.- submerged installation, free-standing
- submerged installation on auto-coupling systems
Suitable for: Commercial wastewater, Domestic wastewater, Wastewater transport, Flood control
In stock
Free Standard Delivery
-
98511256
Grundfos - MTR 1 17/17 A W A HUUV Vertical Multi-Stage Immersible Pump - 415V - Three Phase - 17 StageMTR 1-17/17 A-W-A-HUUV
multi-stage, immersible, self-priming, centrifugal pump unit for vertical installation in tanks etc. The pump head and base are in Cast Iron – all other wetted parts are in Stainless Steel. The pump has the following characteristics:
A cartridge shaft seal ensures high reliability, safe handling, and straightforward access and service. The pump is equipped with a 3-phase, fan-cooled asynchronous motor.- Power transmission via sintered metal split coupling
- Mechanical shaft seal according to EN 12756
- Impellers, intermediate chambers and spline shaft are made of Stainless Steel
- Dimensions according to DIN 5440
Suitable for: Machining
6 week lead time
Free Standard Delivery
-
96086710
Grundfos - TPD 32-250/2 A-F-A-BQQE-HX1 In-Line Twin Head Circulator Pump - 415V - Three Phase - 283 Ltr/min. - Cast IronTPD 32-250/2 A-F-A-BQQE-HW1
Single-stage, close-coupled, volute twin-head pump unit with in-line suction and discharge ports of identical diameter. The twin-head pump is designed with two parallel power-heads. The pump is of the top-pull-out design, i.e. the power head (motor, pump head and impeller) can be removed for maintenance or service while the pump housing remains in the pipework. Each power head is fitted with an unbalanced rubber bellows seal. The shaft seal is according to EN 12756. All pipework connection is via PN 16 DIN flanges (EN 1092-2 and ISO 7005-2). Each power head is fitted with a fan-cooled asynchronous motor of indentical size.
Suitable for: Commercial air conditioning
In stock
Free Standard Delivery
-
98437888
Grundfos - TPE2 40-180 N-A-F-A-BQQE-FDC Variable Speed In-Line Circulator Pump - 415V - Three Phase - 483 Ltr/min. - Cast IronTPE2 40-180 N-A-F-A-BQQE-FYC
Single-stage, close-coupled, volute (centrifugal) pump unit with in-line suction and discharge ports of identical diameter. The pump is of the top-pull-out design, i.e. the power head (motor, pump head and impeller) can be removed for maintenance or service while the pump housing remains in the pipework. The shaft seal is according to EN 12756. All pipework connection is via PN 6/10 DIN flanges (EN 1092-2 and ISO 7005-2). The pump is equipped with a fan-cooled, permanent-magnet synchronous motor. The pump is equipped with a fan-cooled asynchronous motor. The motor efficiency is classified as IE5 in accordance with IEC 60034-30-2.
Suitable for: Commercial air conditioning
In stock
Free Standard Delivery
-
99272552
Grundfos - TPE3 D 50-80 S-A-F-A-BQQE-DDB Twin Head In-Line Circulator Pump - 415V - Three Phase - 483 Ltr/min. - Cast IronTPE3 D 50-80 S-A-F-A-BQQE-DYB
Single-stage, close-coupled, volute twin-head Pump with in-line suction and discharge ports of identical diameter. The twin-head Pump is engineered with two parallel power-heads. The Pump is of the top-pull-out design, i.e. the power head (motor, Pump head and impeller) can be removed for maintenance or service while the Pump housing remains in the pipework. Each power head is equipped with an unbalanced rubber bellows seal. The shaft seal is according to EN 12756. Pipework connection is via PN 6/10 DIN flanges (EN 1092-2 and ISO 7005-2). Each power head is equipped with a fan-cooled, permanent-magnet synchronous motor of identical size. Each power head is equipped with a fan-cooled asynchronous motor of indentical size. The motor performance is classified as IE5 in accordance with IEC 60034-30-2. The motor includes a frequency converter and PI controller in the motor terminal box. This enables continuously variable management of the motor speed, which again enables adaptation of the output to a given requirement. The Pump is equipped with temperature- and differential pressure sensors.
- Suitable for Commercial heating, Commercial air conditioning, District heating, District cooling, Industrial heating, Industrial cooling, Desalination, Drinking water treatment, Water distribution, Irrigation, Community water supply
- This product's housing material is Cast Iron
- The impeller is manufactured from Composite
- Maximum operating pressure: 10 Bar.
- Temperature liquid range: -25 .. 120 °C.
In stock
Free Standard Delivery
-
98437897
Grundfos - TPE2 50-240 N-A-F-A-BQQE-IDC Variable Speed In-Line Circulator Pump - 415V - Three Phase - 884 Ltr/min. - Cast IronTPE2 50-240 N-A-F-A-BQQE-IYC
Single-stage, close-coupled, volute (centrifugal) pump unit with in-line suction and discharge ports of identical diameter. The pump is of the top-pull-out design, i.e. the power head (motor, pump head and impeller) can be removed for maintenance or service while the pump housing remains in the pipework. The shaft seal is according to EN 12756. All pipework connection is via PN 6/10 DIN flanges (EN 1092-2 and ISO 7005-2). The pump is equipped with a fan-cooled, permanent-magnet synchronous motor. The pump is equipped with a fan-cooled asynchronous motor. The motor efficiency is classified as IE5 in accordance with IEC 60034-30-2.
Suitable for: Commercial air conditioning
In stock
Free Standard Delivery
-
96075894
Grundfos - SEG.40.09.EX.2.1.502 Submersible Sewage Grinder Pump - 240V - Single Phase - 250 Ltr/min. - Cast IronSEG.40.09.EX.2.1.502
Grundfos SEG grinder pumps are non-self-priming, single-stage, centrifugal pumps with horizontal discharge port, specifically designed for pumping wastewater containing discharge from toilets. The pump is equipped with a grinder system that grinds destructible solids into small pieces to lead them through pipes with a relatively small diameter. SEG grinder pumps are well-suited for use in sparsely populated areas, where gravity sewage systems are not available. Examples include villages, farm areas and areas with large terrain-level differences, where a pressurised system has advantages. The pump is available for two types of installation:
The pump is made of wear-resistant materials, such as Cast Iron and Stainless Steel. These materials ensure dependable operation. The surface of the pump is smooth to prevent dirt and impurities from sticking. The corrosion-protected Stainless Steel clamp is securing the motor to the pump housing and allow the straightforward service of the pump. SmartTrim system allows straightforward adjustment of the impeller clearance to ensure maximum efficiency during the pump lifespan. The range is designed to reduce energy consumption and keep downtime costs to a minimum, while maintaining peak performance throughout the lifespan of the system. The pump is explosion-proof.- submerged installation, free-standing
- submerged installation on auto-coupling systems
Suitable for: Commercial wastewater, Domestic wastewater, Wastewater transport, Flood control
In stock
Free Standard Delivery
-
99272219
Grundfos - TPE3 50-240 S-A-F-A-BQQE-IDC Variable Speed In-Line Circulator Pump - 415V - Three Phase - 884 Ltr/min. - Cast IronTPE3 50-240 S-A-F-A-BQQE-IYC
Single-stage, close-coupled, volute Pump with in-line suction and discharge ports of identical diameter. The Pump is of the top-pull-out design, i.e. the power head (motor, Pump head and impeller) can be removed for maintenance or service while the Pump housing remains in the pipework. The shaft seal is according to EN 12756. Pipework connection is via PN 6/10 DIN flanges (EN 1092-2 and ISO 7005-2). The Pump is equipped with a fan-cooled, permanent-magnet synchronous motor. The Pump is equipped with a fan-cooled asynchronous motor. The motor performance is classified as IE5 in accordance with IEC 60034-30-2. The motor includes a frequency converter and PI controller in the motor terminal box. This enables continuously variable management of the motor speed, which again enables adaptation of the output to a given requirement. The Pump is equipped with temperature- and differential pressure sensors.
- Suitable for Commercial heating, Commercial air conditioning, District heating, District cooling, Industrial heating, Industrial cooling, Desalination, Drinking water treatment, Water distribution, Irrigation, Community water supply
- This product's housing material is Cast Iron
- The impeller is manufactured from Composite
- Maximum operating pressure: 10 Bar.
- Temperature liquid range: -25 .. 120 °C.
In stock
Free Standard Delivery















