-
98288708
Grundfos - ALPHA2 L 20-40 N 150 Hot Water Circulator Pump - 230V - Single Phase - Stainless SteelALPHA2 L 20-40 N 150
GRUNDFOS ALPHA2 L N A circulator designed to circulate domestic hot water within the hot water distribution system
- With the port-to-port measurement of 150 mm and Stainless Steel construction it completely fulfills the application demand
ALPHA2 L N is the latest member of the Grundfos family of high-quality circulators.
With the alpha ALPHA2 L-series, you can stop worrying about complicated pump settings.
space-efficient design The modernised design makes ALPHA2 L the most space-efficient Grundfos circulator available. With the electronics integrated in the pump housing, installation in very confined spaces is now possible.
A-label The frequency converter, permanent-magnet technology, and space-efficient stator place ALPHA2 L highest on the energy label scheme. ALPHA2 L will use up to 80 % less electrical energy than D-labelled circulators.
ALPHA plug The much appreciated and very popular ALPHA plug is the only plug in the market that offers extremely uncomplicated cable connection.
One-touch operation Intuitive one-touch operation enables uncomplicated setting.
Suitable for: Domestic hot water recirculation
In stock
Free Standard Delivery
-
011H6000
Grundfos - Unilift KP 150-M-1 Submersible Pump - Without Float - 230VStainless steel manual sump pump, max flow rate 2.3l/sec and max head 5m, 1 1/4" threaded connections and 10mm solids handling
2-3 day delivery
Free Standard Delivery
-
98776578
Grundfos - SPK 4-15/15 A-W-A-AUUV Immersible Multi-Stage Pump - 415V - Three Phase - 15 StageSPK 4-15/15 A-W-A-AUUV
multi-stage, immersible, self-priming, centrifugal pump unit for vertical and horizontal installation in tanks etc.The pump has the following characteristics:
- Power transmission via Cast Iron split coupling
- Mechanical shaft seal according to EN 12756
- Impellers, intermediate chambers and spline shaft are made of Stainless Steel and motor stool of GG 20
- Installation length according to DIN 5440
The motor is a 3-phase AC motor.
Suitable for: Machining
In stock
Free Standard Delivery
-
98776576
Grundfos - SPK 4-11/11 A-W-A-AUUV Multi-Stage Immersible Pump - 415V - Three Phase - 11 StageSPK 4-11/11 A-W-A-AUUV
multi-stage, immersible, self-priming, centrifugal pump unit for vertical and horizontal installation in tanks etc.The pump has the following characteristics:
- Power transmission via Cast Iron split coupling
- Mechanical shaft seal according to EN 12756
- Impellers, intermediate chambers and spline shaft are made of Stainless Steel and motor stool of GG 20
- Installation length according to DIN 5440
The motor is a 3-phase AC motor.
Suitable for: Machining
In stock
Free Standard Delivery
-
39GH0001
Grundfos - SPK 4-1/1 T-W-A-AUUV Multi-Stage Immersible Pump - 415V - Three Phase - 1 StageVertical multistage centrifugal pump designed for tank top mounting and for pumping of cooling lubricants and cutting oils for machine tools, condensate transfer and similar applications.
In stock
Free Standard Delivery
-
98958080
Grundfos - TP 100-30/4 AI-F-Z-BQQE-EX3 Fixed Speed In-Line Circulator Pump - 240V - Single Phase - 1000 Ltr/min. - Stainless SteelTP 100-30/4 AI-F-Z-BQQE-EW3
Single-stage, close-coupled, volute (centrifugal) pump unit with in-line suction and discharge ports of identical diameter. The pump is of the top-pull-out design, i.e. the power head (motor, pump head and impeller) can be removed for maintenance or service while the pump housing remains in the pipework. The pump is equipped with an unbalanced rubber bellows seal. The shaft seal is according to EN 12756. All pipework connection is via PN 6 DIN flanges (EN 1092-2 and ISO 7005-2). The pump is equipped with a fan-cooled asynchronous motor.
Suitable for: Commercial heating, Commercial air conditioning, District heating, District cooling, Industrial heating, Industrial cooling, Desalination, Drinking water treatment, Water distribution, Irrigation, Community water supply
In stock
Free Standard Delivery
-
39DH0308
Grundfos - SPK 2-8/8 A-W-A-AUUV Multi-Stage Immersible Pump - 415V - Three Phase - 8 StageVertical multistage centrifugal pump designed for tank top mounting and for pumping of cooling lubricants and cutting oils for machine tools, condensate transfer and similar applications.
In stock
Free Standard Delivery
-
In stock
Free Standard Delivery
-
39DH5205
Grundfos - SPK 2-5/5 A-W-A-AUUV Immersible Multi-Stage Pump - 415V - Three Phase - 5 StageVertical multistage centrifugal pump designed for tank top mounting and for pumping of cooling lubricants and cutting oils for machine tools, condensate transfer and similar applications.
In stock
Free Standard Delivery
-
96124996
Grundfos - NB 50-125/125 AAF2AESBAQEEW3 End Suction Pump - 400V - Three Phase - 548 Ltr/min. - Cast IronNB 50-125/125 AAF2AESBAQEEW3
Non-self-priming, single-stage, centrifugal volute pump unit designed according to ISO 5199 with dimensions and rated performance according to EN 733 (10 bar). Flanges are PN 16 with dimensions according to EN 1092-2. The pump has an axial suction port, radial discharge port, horizontal shaft and a back pull-out design enabling removal of the motor, motor stool, cover and impeller without disturbing the pump housing or pipework. The unbalanced rubber bellows seal is according to DIN EN 12756. The pump is close-coupled to a fan-cooled asynchronous motor.
Suitable for: Commercial air conditioning, Industrial heating, Irrigation
In stock
Free Standard Delivery
-
GR-96280982
Grundfos - Unilift CC 9 A-1 Submersible Pump - With Level Switch - 230VUnilift CC9 - A1
Grundfos Unilift CC pumps are single-stage submersible pumps with a low suction ability down to 3 mm water level. The pumps are designed for pumping rainwater and grey wastewater, e.g. from
- swimming pools, ponds or fountains
- wells for surface water with inlets from roof gutters, pits, tunnels, etc.
- draining wells
- cellars or buildings prone to flooding
- washing machines, baths, sinks, etc. from low-lying parts of buildings up to sewer level
The pumps are appropriate for both stationary and portable use. They are for self-operating operation. The pumps allow free passage of particles up to ¸10 mm.
The motor incorporates self-operating overload protection cutting out the motor in case of overload. When cooled to normal temperature, the motor restarts automatically.
Suitable for: Commercial wastewater, Domestic wastewater, Industrial wastewater treatment and reuse
In stock
Free Standard Delivery
-
GR-96402543
Grundfos - TP 100-30/4 0.55kw 1450RPM BQQE 96402543 Commercial Circulator Pump - 415V - OBSOLETE - 0.55kWTP 100-30/4 AI-F-A-BUBE
Single-stage, close-coupled, volute (centrifugal) pump unit with in-line suction and discharge ports of identical diameter. The pump is of the top-pull-out design, i.e. the power head (motor, pump head and impeller) can be removed for maintenance or service while the pump housing remains in the pipework. The pump is equipped with an unbalanced rubber bellows seal. The shaft seal is according to EN 12756. All pipework connection is via PN 6 DIN flanges (EN 1092-2 and ISO 7005-2). The pump is equipped with a fan-cooled asynchronous motor.
Suitable for: Commercial air conditioning
3 week lead time
Free Standard Delivery
-
39DH5103
Grundfos - SPK 2-3/3 A-W-A-AUUV Multi-Stage Immersible Pump - 415V - Three Phase - 3 StageVertical multistage centrifugal pump designed for tank top mounting and for pumping of cooling lubricants and cutting oils for machine tools, condensate transfer and similar applications.
In stock
Free Standard Delivery
-
98776573
Grundfos - SPK 2-23/23 A-W-A-AUUV Multi-Stage Immersible Pump - 415V - Three Phase - 23 StageSPK 2-23/23 A-W-A-AUUV
multi-stage, immersible, self-priming, centrifugal pump unit for vertical and horizontal installation in tanks etc.The pump has the following characteristics:
- Power transmission via Cast Iron split coupling
- Mechanical shaft seal according to EN 12756
- Impellers, intermediate chambers and spline shaft are made of Stainless Steel and motor stool of GG 20
- Installation length according to DIN 5440
The motor is a 3-phase AC motor.
Suitable for: Machining
In stock
Free Standard Delivery
-
98776571
Grundfos - SPK 2-19/19 A-W-A-AUUV Multi-Stage Immersible Pump - 415V - Three Phase - 19 StageSPK 2-19/19 A-W-A-AUUV
multi-stage, immersible, self-priming, centrifugal pump unit for vertical and horizontal installation in tanks etc.The pump has the following characteristics:
- Power transmission via Cast Iron split coupling
- Mechanical shaft seal according to EN 12756
- Impellers, intermediate chambers and spline shaft are made of Stainless Steel and motor stool of GG 20
- Installation length according to DIN 5440
The motor is a 3-phase AC motor.
Suitable for: Machining
In stock
Free Standard Delivery
-
39DH0515
Grundfos - SPK 2-15/15 A-W-A-AUUV Multi-Stage Immersible Pump - 415V - Three Phase - 15 StageVertical multistage centrifugal pump designed for tank top mounting and for pumping of cooling lubricants and cutting oils for machine tools, condensate transfer and similar applications.
In stock
Free Standard Delivery















