-
99113654
Grundfos - TPE 125-80/4 A-F-A-BQQE-JDA Variable Speed In-Line Circulator Pump - 415V - Three Phase - 2685 Ltr/min. - Cast IronTPE 125-80/4 A-F-A-BQQE-JWA
Single-stage, close-coupled, volute (centrifugal) pump unit with in-line suction and discharge ports of identical diameter. The pump is of the top-pull-out design, i.e. the power head (motor, pump head and impeller) can be removed for maintenance or service while the pump housing remains in the pipework. The pump is equipped with an unbalanced rubber bellows seal. The shaft seal is according to EN 12756. All pipework connection is via PN 16 DIN flanges (EN 1092-2 and ISO 7005-2). The pump is equipped with a fan-cooled, permanent-magnet synchronous motor. The pump is equipped with a fan-cooled asynchronous motor. The motor efficiency is classified as IE5 in accordance with IEC 60034-30-2.
Suitable for: Commercial air conditioning
In stock
Free Standard Delivery
-
98438565
Grundfos - TPE2 D 40-240 N-A-F-A-BQQE-HAC Twin Head In-Line Circulator Pump - 240V - Single Phase - 567 Ltr/min. - Cast IronTPE2 D 40-240 N-A-F-A-BQQE-HYC
Single-stage, close-coupled, volute twin-head pump unit with in-line suction and discharge ports of identical diameter. The twin-head pump is designed with two parallel power-heads. The pump is of the top-pull-out design, i.e. the power head (motor, pump head and impeller) can be removed for maintenance or service while the pump housing remains in the pipework. Each power head is fitted with an unbalanced rubber bellows seal. The shaft seal is according to EN 12756. All pipework connection is via PN 6/10 DIN flanges (EN 1092-2 and ISO 7005-2). Each power head is fitted with a fan-cooled, permanent-magnet synchronous motor of identical size. Each power head is fitted with a fan-cooled asynchronous motor of indentical size. The motor efficiency is classified as IE5 in accordance with IEC 60034-30-2.
Suitable for: Commercial air conditioning
In stock
Free Standard Delivery
-
99272261
Grundfos - TPE3 65-60 S-A-F-A-BQQE-DAB Variable Speed In-Line Circulator Pump - 240V - Single Phase - 533 Ltr/min. - Cast IronTPE3 65-60 S-A-F-A-BQQE-DYB
Single-stage, close-coupled, volute Pump with in-line suction and discharge ports of identical diameter. The Pump is of the top-pull-out design, i.e. the power head (motor, Pump head and impeller) can be removed for maintenance or service while the Pump housing remains in the pipework. The shaft seal is according to EN 12756. Pipework connection is via PN 6/10 DIN flanges (EN 1092-2 and ISO 7005-2). The Pump is equipped with a fan-cooled, permanent-magnet synchronous motor. The Pump is equipped with a fan-cooled asynchronous motor. The motor performance is classified as IE5 in accordance with IEC 60034-30-2. The motor includes a frequency converter and PI controller in the motor terminal box. This enables continuously variable management of the motor speed, which again enables adaptation of the output to a given requirement. The Pump is equipped with temperature- and differential pressure sensors.
- Suitable for Commercial heating, Commercial air conditioning, District heating, District cooling, Industrial heating, Industrial cooling, Desalination, Drinking water treatment, Water distribution, Irrigation, Community water supply
- This product's housing material is Cast Iron
- The impeller is manufactured from Composite
- Maximum operating pressure: 10 Bar.
- Temperature liquid range: -25 .. 120 °C.
In stock
Free Standard Delivery
-
99114661
Grundfos - TPE 40-530/2 S-A-F-A-BQQE-MDB Variable Speed In-Line Circulator Pump - 415V - Three Phase - 817 Ltr/min. - Cast IronTPE 40-530/2 S-A-F-A-BQQE-MWB
Single-stage, close-coupled, volute (centrifugal) pump unit with in-line suction and discharge ports of identical diameter. The pump is of the top-pull-out design, i.e. the power head (motor, pump head and impeller) can be removed for maintenance or service while the pump housing remains in the pipework. The pump is equipped with an unbalanced rubber bellows seal. The shaft seal is according to EN 12756. All pipework connection is via PN 16 DIN flanges (EN 1092-2 and ISO 7005-2). The pump is equipped with a fan-cooled, permanent-magnet synchronous motor. The pump is equipped with a fan-cooled asynchronous motor. The motor efficiency is classified as IE5 in accordance with IEC 60034-30-2. The motor includes a frequency converter and PI controller in the motor terminal box. This enables continuously variable control of the motor speed, which again enables adaptation of the performance to a given requirement. The pump is equipped with a differential pressure sensor.
Suitable for: Commercial heating, Commercial air conditioning, District heating, District cooling, Industrial heating, Industrial cooling, Desalination, Drinking water treatment, Water distribution, Irrigation, Community water supply
In stock
Free Standard Delivery
-
98437893
Grundfos - TPE2 50-120 N-A-F-A-BQQE-EDB Variable Speed In-Line Circulator Pump - 415V - Three Phase - 633 Ltr/min. - Cast IronTPE2 50-120 N-A-F-A-BQQE-EYB
Single-stage, close-coupled, volute (centrifugal) pump unit with in-line suction and discharge ports of identical diameter. The pump is of the top-pull-out design, i.e. the power head (motor, pump head and impeller) can be removed for maintenance or service while the pump housing remains in the pipework. The shaft seal is according to EN 12756. All pipework connection is via PN 6/10 DIN flanges (EN 1092-2 and ISO 7005-2). The pump is equipped with a fan-cooled, permanent-magnet synchronous motor. The pump is equipped with a fan-cooled asynchronous motor. The motor efficiency is classified as IE5 in accordance with IEC 60034-30-2.
Suitable for: Commercial air conditioning
In stock
Free Standard Delivery
-
98993074
Grundfos - MTH 4 8/8 A W A AQQV Multi-Stage Immersible Pump - 415V - Three Phase - 8 StageMTH 4-8/8 A-W-A-AQQV
multi-stage, immersible, self-priming, centrifugal pump unit for vertical installation in tanks etc.The pump has the following characteristics:
- Mechanical shaft seal according to EN 12756
- Impellers, intermediate chambers and spline shaft are made of Stainless Steel
- Installation length according to DIN 5440
The pump is close-coupled with a 3-phase motor.
Suitable for: Machining
In stock
Free Standard Delivery
-
99272203
Grundfos - TPE3 32-120 S-A-F-A-BQQE-CDB Variable Speed In-Line Circulator Pump - 415V - Three Phase - 266 Ltr/min. - Cast IronTPE3 32-120 S-A-F-A-BQQE-CYB
Single-stage, close-coupled, volute Pump with in-line suction and discharge ports of identical diameter. The Pump is of the top-pull-out design, i.e. the power head (motor, Pump head and impeller) can be removed for maintenance or service while the Pump housing remains in the pipework. The shaft seal is according to EN 12756. Pipework connection is via PN 6/10 DIN flanges (EN 1092-2 and ISO 7005-2). The Pump is equipped with a fan-cooled, permanent-magnet synchronous motor. The Pump is equipped with a fan-cooled asynchronous motor. The motor performance is classified as IE5 in accordance with IEC 60034-30-2. The motor includes a frequency converter and PI controller in the motor terminal box. This enables continuously variable management of the motor speed, which again enables adaptation of the output to a given requirement. The Pump is equipped with temperature- and differential pressure sensors.
- Suitable for Commercial heating, Commercial air conditioning, District heating, District cooling, Industrial heating, Industrial cooling, Desalination, Drinking water treatment, Water distribution, Irrigation, Community water supply
- This product's housing material is Cast Iron
- The impeller is manufactured from Composite
- Maximum operating pressure: 10 Bar.
- Temperature liquid range: -25 .. 120 °C.
In stock
Free Standard Delivery
-
99272262
Grundfos - TPE3 65-80 S-A-F-A-BQQE-EAB Variable Speed In-Line Circulator Pump - 240V - Single Phase - 650 Ltr/min. - Cast IronTPE3 65-80 S-A-F-A-BQQE-EYB
Single-stage, close-coupled, volute (centrifugal) pump unit with in-line suction and discharge ports of identical diameter. The pump is of the top-pull-out design, i.e. the power head (motor, pump head and impeller) can be removed for maintenance or service while the pump housing remains in the pipework. The shaft seal is according to EN 12756. All pipework connection is via PN 6/10 DIN flanges (EN 1092-2 and ISO 7005-2). The pump is equipped with a fan-cooled, permanent-magnet synchronous motor. The pump is equipped with a fan-cooled asynchronous motor. The motor efficiency is classified as IE5 in accordance with IEC 60034-30-2. The motor includes a frequency converter and PI controller in the motor terminal box. This enables continuously variable control of the motor speed, which again enables adaptation of the performance to a given requirement. The pump is equipped with temperature- and differential pressure sensors.
Suitable for: Commercial heating, Commercial air conditioning, District heating, District cooling, Industrial heating, Industrial cooling, Desalination, Drinking water treatment, Water distribution, Irrigation, Community water supply
In stock
Free Standard Delivery
-
98993068
Grundfos - MTH 4 7/7 A W A AQQV Multi-Stage Immersible Pump - 415V - Three Phase - 7 StageMTH 4-7/7 A-W-A-AQQV
multi-stage, immersible, self-priming, centrifugal pump unit for vertical installation in tanks etc.The pump has the following characteristics:
- Mechanical shaft seal according to EN 12756
- Impellers, intermediate chambers and spline shaft are made of Stainless Steel
- Installation length according to DIN 5440
The pump is close-coupled with a 3-phase motor.
Suitable for: Machining
In stock
Free Standard Delivery
-
98438349
Grundfos - TPE2 50-60 N-A-F-A-BQQE-DAB Variable Speed In-Line Circulator Pump - 240V - Single Phase - 417 Ltr/min. - Cast IronTPE2 50-60 N-A-F-A-BQQE-DYB
Single-stage, close-coupled, volute (centrifugal) pump unit with in-line suction and discharge ports of identical diameter. The pump is of the top-pull-out design, i.e. the power head (motor, pump head and impeller) can be removed for maintenance or service while the pump housing remains in the pipework. The shaft seal is according to EN 12756. All pipework connection is via PN 6/10 DIN flanges (EN 1092-2 and ISO 7005-2). The pump is equipped with a fan-cooled, permanent-magnet synchronous motor. The pump is equipped with a fan-cooled asynchronous motor. The motor efficiency is classified as IE5 in accordance with IEC 60034-30-2.
Suitable for: Commercial air conditioning
In stock
Free Standard Delivery
-
98992642
Grundfos - MTH 2 8/8 A W A AQQV Multi-Stage Immersible Pump - 415V - Three Phase - 8 StageMTH 2-8/8 A-W-A-AQQV
multi-stage, immersible, self-priming, centrifugal pump unit for vertical installation in tanks etc.The pump has the following characteristics:
- Mechanical shaft seal according to EN 12756
- Impellers, intermediate chambers and spline shaft are made of Stainless Steel
- Installation length according to DIN 5440
The pump is close-coupled with a 3-phase motor.
Suitable for: Machining
In stock
Free Standard Delivery
-
96075898
Grundfos - SEG.40.09.EX.2.50B Submersible Sewage Grinder Pump - 415V - Three Phase - 266 Ltr/min. - Cast IronSEG.40.09.EX.2.50B
Grundfos SEG grinder pumps are non-self-priming, single-stage, centrifugal pumps with horizontal discharge port, specifically designed for pumping wastewater containing discharge from toilets. The pump is equipped with a grinder system that grinds destructible solids into small pieces to lead them through pipes with a relatively small diameter. SEG grinder pumps are well-suited for use in sparsely populated areas, where gravity sewage systems are not available. Examples include villages, farm areas and areas with large terrain-level differences, where a pressurised system has advantages. The pump is available for two types of installation:
The pump is made of wear-resistant materials, such as Cast Iron and Stainless Steel. These materials ensure dependable operation. The surface of the pump is smooth to prevent dirt and impurities from sticking. The corrosion-protected Stainless Steel clamp is securing the motor to the pump housing and allow the straightforward service of the pump. SmartTrim system allows straightforward adjustment of the impeller clearance to ensure maximum efficiency during the pump lifespan. The range is designed to reduce energy consumption and keep downtime costs to a minimum, while maintaining peak performance throughout the lifespan of the system. The pump is explosion-proof.- submerged installation, free-standing
- submerged installation on auto-coupling systems
Suitable for: Commercial wastewater, Domestic wastewater, Wastewater transport, Flood control
In stock
Free Standard Delivery
-
99114665
Grundfos - TPE 50-430/2 S-A-F-A-BQQE-LDB Variable Speed In-Line Circulator Pump - 415V - Three Phase - 783 Ltr/min. - Cast IronTPE 50-430/2 S-A-F-A-BQQE-LWB
Single-stage, close-coupled, volute (centrifugal) pump unit with in-line suction and discharge ports of identical diameter. The pump is of the top-pull-out design, i.e. the power head (motor, pump head and impeller) can be removed for maintenance or service while the pump housing remains in the pipework. The pump is equipped with an unbalanced rubber bellows seal. The shaft seal is according to EN 12756. All pipework connection is via PN 16 DIN flanges (EN 1092-2 and ISO 7005-2). The pump is equipped with a fan-cooled, permanent-magnet synchronous motor. The pump is equipped with a fan-cooled asynchronous motor. The motor efficiency is classified as IE5 in accordance with IEC 60034-30-2. The motor includes a frequency converter and PI controller in the motor terminal box. This enables continuously variable control of the motor speed, which again enables adaptation of the performance to a given requirement. The pump is equipped with a differential pressure sensor.
Suitable for: Commercial heating, Commercial air conditioning, District heating, District cooling, Industrial heating, Industrial cooling, Desalination, Drinking water treatment, Water distribution, Irrigation, Community water supply
In stock
Free Standard Delivery
-
98438556
Grundfos - TPE2 D 32-120 N-A-F-A-BQQE-CAB Twin Head In-Line Circulator Pump - 240V - Single Phase - 250 Ltr/min. - Cast IronTPE2 D 32-120 N-A-F-A-BQQE-CYB
Single-stage, close-coupled, volute twin-head pump unit with in-line suction and discharge ports of identical diameter. The twin-head pump is designed with two parallel power-heads. The pump is of the top-pull-out design, i.e. the power head (motor, pump head and impeller) can be removed for maintenance or service while the pump housing remains in the pipework. Each power head is fitted with an unbalanced rubber bellows seal. The shaft seal is according to EN 12756. All pipework connection is via PN 6/10 DIN flanges (EN 1092-2 and ISO 7005-2). Each power head is fitted with a fan-cooled, permanent-magnet synchronous motor of identical size. Each power head is fitted with a fan-cooled asynchronous motor of indentical size. The motor efficiency is classified as IE5 in accordance with IEC 60034-30-2.
Suitable for: Commercial air conditioning
In stock
Free Standard Delivery
-
96075913
Grundfos - SEG.40.26.2.50B Submersible Sewage Grinder Pump - 415V - Three Phase - 287 Ltr/min. - Cast IronSEG.40.26.2.50B
Grundfos SEG grinder pumps are non-self-priming, single-stage, centrifugal pumps with horizontal discharge port, specifically designed for pumping wastewater containing discharge from toilets. The pump is equipped with a grinder system that grinds destructible solids into small pieces to lead them through pipes with a relatively small diameter. SEG grinder pumps are well-suited for use in sparsely populated areas, where gravity sewage systems are not available. Examples include villages, farm areas and areas with large terrain-level differences, where a pressurised system has advantages. The pump is available for two types of installation:
The pump is made of wear-resistant materials, such as Cast Iron and Stainless Steel. These materials ensure dependable operation. The surface of the pump is smooth to prevent dirt and impurities from sticking. The corrosion-protected Stainless Steel clamp is securing the motor to the pump housing and allow the straightforward service of the pump. SmartTrim system allows straightforward adjustment of the impeller clearance to ensure maximum efficiency during the pump lifespan. The range is designed to reduce energy consumption and keep downtime costs to a minimum, while maintaining peak performance throughout the lifespan of the system.- submerged installation, free-standing
- submerged installation on auto-coupling systems
Suitable for: Commercial wastewater, Domestic wastewater, Wastewater transport, Flood control
In stock
Free Standard Delivery
-
96096440
Grundfos - TPE 50-710/2 A-F-A-BQQE-OX1 Variable Speed In-Line Circulator Pump - 415V - Three Phase - 1000 Ltr/min. - Cast IronTPE 50-710/2 A-F-A-BQQE-OW1
Single-stage, close-coupled, volute (centrifugal) pump unit with in-line suction and discharge ports of identical diameter. The pump is of the top-pull-out design, i.e. the power head (motor, pump head and impeller) can be removed for maintenance or service while the pump housing remains in the pipework. The pump is equipped with an unbalanced rubber bellows seal. The shaft seal is according to EN 12756. All pipework connection is via PN 16 DIN flanges (EN 1092-2 and ISO 7005-2). The pump is equipped with a fan-cooled asynchronous motor.
Suitable for: Commercial air conditioning
In stock
Free Standard Delivery















