-
99105433
Grundfos - NBE 65-160/165AAF2AESBQQEHWA End Suction Pump - 400V - Three Phase - 980 Ltr/min. - Cast IronNBE 65-160/165 AAF2AESBQQEHWA
Non-self-priming, single-stage, centrifugal volute pump unit designed according to ISO 5199 with dimensions and rated performance according to EN 733 (10 bar). Flanges are PN 16 with dimensions according to EN 1092-2. The pump has an axial suction port, radial discharge port, horizontal shaft and a back pull-out design enabling removal of the motor, motor stool, cover and impeller without disturbing the pump housing or pipework. The unbalanced rubber bellows seal is according to DIN EN 12756. The pump is close-coupled to a fan-cooled, permanent-magnet synchronous motor. The motor includes a frequency converter and PI controller in the motor terminal box. This enables continuously variable control of the motor speed, which again enables adaptation of the performance to a given requirement.
Suitable for: Commercial air conditioning, Industrial heating, Irrigation
In stock
Free Standard Delivery
-
98844654
Grundfos - NBE 65-160/173AASF2AESBQQEOW1 End Suction Pump - 400V - Three Phase - 1924 Ltr/min. - Cast IronNBE 65-160/173 AASF2AESBQQEOWB
Non-self-priming, single-stage, centrifugal volute pump unit designed according to ISO 5199 with dimensions and rated performance according to EN 733 (10 bar). Flanges are PN 16 with dimensions according to EN 1092-2. The pump has an axial suction port, radial discharge port, horizontal shaft and a back pull-out design enabling removal of the motor, motor stool, cover and impeller without disturbing the pump housing or pipework. The unbalanced rubber bellows seal is according to DIN EN 12756. The pump is close-coupled to a fan-cooled, permanent-magnet synchronous motor. The motor includes a frequency converter and PI controller in the motor terminal box. This enables continuously variable control of the motor speed, which again enables adaptation of the performance to a given requirement.
Suitable for: Commercial air conditioning, Industrial heating, Irrigation
In stock
Free Standard Delivery
-
99105434
Grundfos - NBE 65-160/177AAF2AESBQQEIWA End Suction Pump - 400V - Three Phase - 1067 Ltr/min. - Cast IronNBE 65-160/177 AAF2AESBQQEIWA
Non-self-priming, single-stage, centrifugal volute pump unit designed according to ISO 5199 with dimensions and rated performance according to EN 733 (10 bar). Flanges are PN 16 with dimensions according to EN 1092-2. The pump has an axial suction port, radial discharge port, horizontal shaft and a back pull-out design enabling removal of the motor, motor stool, cover and impeller without disturbing the pump housing or pipework. The unbalanced rubber bellows seal is according to DIN EN 12756. The pump is close-coupled to a fan-cooled, permanent-magnet synchronous motor. The motor includes a frequency converter and PI controller in the motor terminal box. This enables continuously variable control of the motor speed, which again enables adaptation of the performance to a given requirement.
Suitable for: Commercial air conditioning, Industrial heating, Irrigation
In stock
Free Standard Delivery
-
98979888
Grundfos - NBE 65-160/177AASF2AESBQQEPW1 End Suction Pump - 400V - Three Phase - 1978 Ltr/min. - Cast IronNBE 65-160/177 AASF2AESBQQEPWB
Non-self-priming, single-stage, centrifugal volute pump unit designed according to ISO 5199 with dimensions and rated performance according to EN 733 (10 bar). Flanges are PN 16 with dimensions according to EN 1092-2. The pump has an axial suction port, radial discharge port, horizontal shaft and a back pull-out design enabling removal of the motor, motor stool, cover and impeller without disturbing the pump housing or pipework. The unbalanced rubber bellows seal is according to DIN EN 12756. The pump is close-coupled to a fan-cooled, permanent-magnet synchronous motor. The motor includes a frequency converter and PI controller in the motor terminal box. This enables continuously variable control of the motor speed, which again enables adaptation of the performance to a given requirement.
Suitable for: Commercial air conditioning, Industrial heating, Irrigation
In stock
Free Standard Delivery
-
99101899
Grundfos - NBE 65-200/162AASF2AESBQQENWB End Suction Pump - 400V - Three Phase - 1473 Ltr/min. - Cast IronNBE 65-200/162 AASF2AESBQQENWB
Non-self-priming, single-stage, centrifugal volute pump unit designed according to ISO 5199 with dimensions and rated performance according to EN 733 (10 bar). Flanges are PN 16 with dimensions according to EN 1092-2. The pump has an axial suction port, radial discharge port, horizontal shaft and a back pull-out design enabling removal of the motor, motor stool, cover and impeller without disturbing the pump housing or pipework. The unbalanced rubber bellows seal is according to DIN EN 12756. The pump is close-coupled to a fan-cooled, permanent-magnet synchronous motor. The motor includes a frequency converter and PI controller in the motor terminal box. This enables continuously variable control of the motor speed, which again enables adaptation of the performance to a given requirement.
Suitable for: Commercial air conditioning, Industrial heating, Irrigation
In stock
Free Standard Delivery
-
99105435
Grundfos - NBE 65-200/170AAF2AESBQQEHWA End Suction Pump - 400V - Three Phase - 777 Ltr/min. - Cast IronNBE 65-200/170 AAF2AESBQQEHWA
Non-self-priming, single-stage, centrifugal volute pump unit designed according to ISO 5199 with dimensions and rated performance according to EN 733 (10 bar). Flanges are PN 16 with dimensions according to EN 1092-2. The pump has an axial suction port, radial discharge port, horizontal shaft and a back pull-out design enabling removal of the motor, motor stool, cover and impeller without disturbing the pump housing or pipework. The unbalanced rubber bellows seal is according to DIN EN 12756. The pump is close-coupled to a fan-cooled, permanent-magnet synchronous motor. The motor includes a frequency converter and PI controller in the motor terminal box. This enables continuously variable control of the motor speed, which again enables adaptation of the performance to a given requirement.
Suitable for: Commercial air conditioning, Industrial heating, Irrigation
In stock
Free Standard Delivery
-
98979890
Grundfos - NBE 65-200/177AASF2AESBQQEOW1 End Suction Pump - 400V - Three Phase - 1581 Ltr/min. - Cast IronNBE 65-200/177 AASF2AESBQQEOWB
Non-self-priming, single-stage, centrifugal volute pump unit designed according to ISO 5199 with dimensions and rated performance according to EN 733 (10 bar). Flanges are PN 16 with dimensions according to EN 1092-2. The pump has an axial suction port, radial discharge port, horizontal shaft and a back pull-out design enabling removal of the motor, motor stool, cover and impeller without disturbing the pump housing or pipework. The unbalanced rubber bellows seal is according to DIN EN 12756. The pump is close-coupled to a fan-cooled, permanent-magnet synchronous motor. The motor includes a frequency converter and PI controller in the motor terminal box. This enables continuously variable control of the motor speed, which again enables adaptation of the performance to a given requirement.
Suitable for: Commercial air conditioning, Industrial heating, Irrigation
In stock
Free Standard Delivery
-
99166379
Grundfos - NBE 65-200/189AAF2AESBQQEIWA End Suction Pump - 400V - Three Phase - 889 Ltr/min. - Cast IronNBE 65-200/189 AAF2AESBQQEIWA
Non-self-priming, single-stage, centrifugal volute pump unit designed according to ISO 5199 with dimensions and rated performance according to EN 733 (10 bar). Flanges are PN 16 with dimensions according to EN 1092-2. The pump has an axial suction port, radial discharge port, horizontal shaft and a back pull-out design enabling removal of the motor, motor stool, cover and impeller without disturbing the pump housing or pipework. The unbalanced rubber bellows seal is according to DIN EN 12756. The pump is close-coupled to a fan-cooled, permanent-magnet synchronous motor. The motor includes a frequency converter and PI controller in the motor terminal box. This enables continuously variable control of the motor speed, which again enables adaptation of the performance to a given requirement.
Suitable for: Commercial air conditioning, Industrial heating, Irrigation
In stock
Free Standard Delivery
-
98645657
Grundfos - NBE 65-200/190AASF2AESBQQEPW1 End Suction Pump - 400V - Three Phase - 1843 Ltr/min. - Cast IronNBE 65-200/190 AASF2AESBQQEPWB
Non-self-priming, single-stage, centrifugal volute pump unit designed according to ISO 5199 with dimensions and rated performance according to EN 733 (10 bar). Flanges are PN 16 with dimensions according to EN 1092-2. The pump has an axial suction port, radial discharge port, horizontal shaft and a back pull-out design enabling removal of the motor, motor stool, cover and impeller without disturbing the pump housing or pipework. The unbalanced rubber bellows seal is according to DIN EN 12756. The pump is close-coupled to a fan-cooled, permanent-magnet synchronous motor. The motor includes a frequency converter and PI controller in the motor terminal box. This enables continuously variable control of the motor speed, which again enables adaptation of the performance to a given requirement.
Suitable for: Commercial air conditioning, Industrial heating, Irrigation
In stock
Free Standard Delivery
-
97907877
Grundfos - NBE 65-200/198AAF2AESBQQEQW1 End Suction Pump - 400V - Three Phase - 1961 Ltr/min. - Cast IronNBE 65-200/198 AAF2AESBQQEQWB
Non-self-priming, single-stage, centrifugal volute pump unit designed according to ISO 5199 with dimensions and rated performance according to EN 733 (10 bar). Flanges are PN 16 with dimensions according to EN 1092-2. The pump has an axial suction port, radial discharge port, horizontal shaft and a back pull-out design enabling removal of the motor, motor stool, cover and impeller without disturbing the pump housing or pipework. The unbalanced rubber bellows seal is according to DIN EN 12756. The pump is close-coupled to a fan-cooled, permanent-magnet synchronous motor. The motor includes a frequency converter and PI controller in the motor terminal box. This enables continuously variable control of the motor speed, which again enables adaptation of the performance to a given requirement.
Suitable for: Commercial air conditioning, Industrial heating, Irrigation
In stock
Free Standard Delivery
-
99105437
Grundfos - NBE 65-200/205AAF2AESBQQEJWA End Suction Pump - 400V - Three Phase - 1000 Ltr/min. - Cast IronNBE 65-200/205 AAF2AESBQQEJWA
Non-self-priming, single-stage, centrifugal volute pump unit designed according to ISO 5199 with dimensions and rated performance according to EN 733 (10 bar). Flanges are PN 16 with dimensions according to EN 1092-2. The pump has an axial suction port, radial discharge port, horizontal shaft and a back pull-out design enabling removal of the motor, motor stool, cover and impeller without disturbing the pump housing or pipework. The unbalanced rubber bellows seal is according to DIN EN 12756. The pump is close-coupled to a fan-cooled, permanent-magnet synchronous motor. The motor includes a frequency converter and PI controller in the motor terminal box. This enables continuously variable control of the motor speed, which again enables adaptation of the performance to a given requirement.
Suitable for: Commercial air conditioning, Industrial heating, Irrigation
In stock
Free Standard Delivery
-
99101750
Grundfos - NBE 65-200/219AAF2AESBQQEKWA End Suction Pump - 400V - Three Phase - 1085 Ltr/min. - Cast IronNBE 65-200/219 AAF2AESBQQEKWA
Non-self-priming, single-stage, centrifugal volute pump unit designed according to ISO 5199 with dimensions and rated performance according to EN 733 (10 bar). Flanges are PN 16 with dimensions according to EN 1092-2. The pump has an axial suction port, radial discharge port, horizontal shaft and a back pull-out design enabling removal of the motor, motor stool, cover and impeller without disturbing the pump housing or pipework. The unbalanced rubber bellows seal is according to DIN EN 12756. The pump is close-coupled to a fan-cooled, permanent-magnet synchronous motor. The motor includes a frequency converter and PI controller in the motor terminal box. This enables continuously variable control of the motor speed, which again enables adaptation of the performance to a given requirement.
Suitable for: Commercial air conditioning, Industrial heating, Irrigation
In stock
Free Standard Delivery
-
99105438
Grundfos - NBE 65-250/215AAF2AESBQQEJWA End Suction Pump - 400V - Three Phase - 865 Ltr/min. - Cast IronNBE 65-250/215 AAF2AESBQQEJWA
Non-self-priming, single-stage, centrifugal volute pump unit designed according to ISO 5199 with dimensions and rated performance according to EN 733 (10 bar). Flanges are PN 16 with dimensions according to EN 1092-2. The pump has an axial suction port, radial discharge port, horizontal shaft and a back pull-out design enabling removal of the motor, motor stool, cover and impeller without disturbing the pump housing or pipework. The unbalanced rubber bellows seal is according to DIN EN 12756. The pump is close-coupled to a fan-cooled, permanent-magnet synchronous motor. The motor includes a frequency converter and PI controller in the motor terminal box. This enables continuously variable control of the motor speed, which again enables adaptation of the performance to a given requirement.
Suitable for: Commercial air conditioning, Industrial heating, Irrigation
In stock
Free Standard Delivery
-
99101772
Grundfos - NBE 65-250/232AAF2AESBQQEKWA End Suction Pump - 400V - Three Phase - 1035 Ltr/min. - Cast IronNBE 65-250/232 AAF2AESBQQEKWA
Non-self-priming, single-stage, centrifugal volute pump unit designed according to ISO 5199 with dimensions and rated performance according to EN 733 (10 bar). Flanges are PN 16 with dimensions according to EN 1092-2. The pump has an axial suction port, radial discharge port, horizontal shaft and a back pull-out design enabling removal of the motor, motor stool, cover and impeller without disturbing the pump housing or pipework. The unbalanced rubber bellows seal is according to DIN EN 12756. The pump is close-coupled to a fan-cooled, permanent-magnet synchronous motor. The motor includes a frequency converter and PI controller in the motor terminal box. This enables continuously variable control of the motor speed, which again enables adaptation of the performance to a given requirement.
Suitable for: Commercial air conditioning, Industrial heating, Irrigation
In stock
Free Standard Delivery
-
99101619
Grundfos - NBE 65-250/254AAF2AESBQQELWA End Suction Pump - 400V - Three Phase - 1167 Ltr/min. - Cast IronNBE 65-250/254 AAF2AESBQQELWA
Non-self-priming, single-stage, centrifugal volute pump unit designed according to ISO 5199 with dimensions and rated performance according to EN 733 (10 bar). Flanges are PN 16 with dimensions according to EN 1092-2. The pump has an axial suction port, radial discharge port, horizontal shaft and a back pull-out design enabling removal of the motor, motor stool, cover and impeller without disturbing the pump housing or pipework. The unbalanced rubber bellows seal is according to DIN EN 12756. The pump is close-coupled to a fan-cooled, permanent-magnet synchronous motor. The motor includes a frequency converter and PI controller in the motor terminal box. This enables continuously variable control of the motor speed, which again enables adaptation of the performance to a given requirement.
Suitable for: Commercial air conditioning, Industrial heating, Irrigation
In stock
Free Standard Delivery
-
99101900
Grundfos - NBE 65-250/270AAF2AESBQQEMWA End Suction Pump - 400V - Three Phase - 1251 Ltr/min. - Cast IronNBE 65-250/270 AAF2AESBQQEMWA
Non-self-priming, single-stage, centrifugal volute pump unit designed according to ISO 5199 with dimensions and rated performance according to EN 733 (10 bar). Flanges are PN 16 with dimensions according to EN 1092-2. The pump has an axial suction port, radial discharge port, horizontal shaft and a back pull-out design enabling removal of the motor, motor stool, cover and impeller without disturbing the pump housing or pipework. The unbalanced rubber bellows seal is according to DIN EN 12756. The pump is close-coupled to a fan-cooled, permanent-magnet synchronous motor. The motor includes a frequency converter and PI controller in the motor terminal box. This enables continuously variable control of the motor speed, which again enables adaptation of the performance to a given requirement.
Suitable for: Commercial air conditioning, Industrial heating, Irrigation
In stock
Free Standard Delivery















