-
99099385
Grundfos - NKE 80-200/222AA2F2AESBQQEMWA Long Coupled Single Stage End Suction Pump - 400V - Three Phase - 1751 Ltr/min. - Cast IronNKE 80-200/222 AA2F2AESBQQEMWA
Non-self-priming, single-stage, centrifugal pump unit designed according to ISO 5199 with dimensions and rated performance according to EN 733. Flanges are PN 16 with dimensions according to EN 1092-2. The pump has an axial suction port, a radial discharge port and horizontal shaft. It is of the back pull-out design enabling removal of the motor, coupling, bearing bracket and impeller without disturbing the pump housing or pipework. The unbalanced rubber bellows seal is according to DIN EN 12756. The pump is equipped with a foot-mounted, fan-cooled, permanent-magnet synchronous motor. Pump and motor are mounted on a common base frame. The pump is equipped with a foot-mounted, fan-cooled asynchronous motor. Pump and motor are mounted on a common base frame. The motor includes a frequency converter and PI controller in the motor terminal box. This enables continuously variable control of the motor speed, which again enables adaptation of the performance to a given requirement.
Suitable for: Commercial heating, Commercial air conditioning, Commercial water pressure boosting, District heating, District cooling, Machining, Process liquids transfer, Industrial heating, Industrial cooling, Industrial water supply and transfer, Industrial process water treatment, Desalination, Surface water intake, Drinking water treatment, Water distribution, Irrigation, Community water supply, Wastewater treatment
6 week lead time
Free Standard Delivery
-
99099390
Grundfos - NKE 80-250/225AA2F2AESBQQELWA Long Coupled Single Stage End Suction Pump - 400V - Three Phase - 1522 Ltr/min. - Cast IronNKE 80-250/225 AA2F2AESBQQELWA
Non-self-priming, single-stage, centrifugal pump unit designed according to ISO 5199 with dimensions and rated performance according to EN 733. Flanges are PN 16 with dimensions according to EN 1092-2. The pump has an axial suction port, a radial discharge port and horizontal shaft. It is of the back pull-out design enabling removal of the motor, coupling, bearing bracket and impeller without disturbing the pump housing or pipework. The unbalanced rubber bellows seal is according to DIN EN 12756. The pump is equipped with a foot-mounted, fan-cooled, permanent-magnet synchronous motor. Pump and motor are mounted on a common base frame. The pump is equipped with a foot-mounted, fan-cooled asynchronous motor. Pump and motor are mounted on a common base frame. The motor includes a frequency converter and PI controller in the motor terminal box. This enables continuously variable control of the motor speed, which again enables adaptation of the performance to a given requirement.
Suitable for: Commercial heating, Commercial air conditioning, Commercial water pressure boosting, District heating, District cooling, Machining, Process liquids transfer, Industrial heating, Industrial cooling, Industrial water supply and transfer, Industrial process water treatment, Desalination, Surface water intake, Drinking water treatment, Water distribution, Irrigation, Community water supply, Wastewater treatment
6 week lead time
Free Standard Delivery
-
99099393
Grundfos - NKE 80-250/247AA2F2AESBQQEMWA Long Coupled Single Stage End Suction Pump - 400V - Three Phase - 1676 Ltr/min. - Cast IronNKE 80-250/244 AA2F2AESBQQEMWA
Non-self-priming, single-stage, centrifugal pump unit designed according to ISO 5199 with dimensions and rated performance according to EN 733. Flanges are PN 16 with dimensions according to EN 1092-2. The pump has an axial suction port, a radial discharge port and horizontal shaft. It is of the back pull-out design enabling removal of the motor, coupling, bearing bracket and impeller without disturbing the pump housing or pipework. The unbalanced rubber bellows seal is according to DIN EN 12756. The pump is equipped with a foot-mounted, fan-cooled, permanent-magnet synchronous motor. Pump and motor are mounted on a common base frame. The pump is equipped with a foot-mounted, fan-cooled asynchronous motor. Pump and motor are mounted on a common base frame. The motor includes a frequency converter and PI controller in the motor terminal box. This enables continuously variable control of the motor speed, which again enables adaptation of the performance to a given requirement.
Suitable for: Commercial heating, Commercial air conditioning, Commercial water pressure boosting, District heating, District cooling, Machining, Process liquids transfer, Industrial heating, Industrial cooling, Industrial water supply and transfer, Industrial process water treatment, Desalination, Surface water intake, Drinking water treatment, Water distribution, Irrigation, Community water supply, Wastewater treatment
6 week lead time
Free Standard Delivery
-
98973712
Grundfos - NKE 80-250/270AA2F2AESBQQENW3 Long Coupled Single Stage End Suction Pump - 400V - Three Phase - 1986 Ltr/min. - Cast IronNKE 80-250/270 AA2F2AESBQQENWA
Non-self-priming, single-stage, centrifugal pump unit designed according to ISO 5199 with dimensions and rated performance according to EN 733. Flanges are PN 16 with dimensions according to EN 1092-2. The pump has an axial suction port, a radial discharge port and horizontal shaft. It is of the back pull-out design enabling removal of the motor, coupling, bearing bracket and impeller without disturbing the pump housing or pipework. The unbalanced rubber bellows seal is according to DIN EN 12756. The pump is equipped with a foot-mounted, fan-cooled, permanent-magnet synchronous motor. Pump and motor are mounted on a common base frame. The pump is equipped with a foot-mounted, fan-cooled asynchronous motor. Pump and motor are mounted on a common base frame. The motor includes a frequency converter and PI controller in the motor terminal box. This enables continuously variable control of the motor speed, which again enables adaptation of the performance to a given requirement.
Suitable for: Commercial heating, Commercial air conditioning, Commercial water pressure boosting, District heating, District cooling, Machining, Process liquids transfer, Industrial heating, Industrial cooling, Industrial water supply and transfer, Industrial process water treatment, Desalination, Surface water intake, Drinking water treatment, Water distribution, Irrigation, Community water supply, Wastewater treatment
6 week lead time
Free Standard Delivery
-
98973714
Grundfos - NKE 80-315/280AA2F2AESBQQENW3 Long Coupled Single Stage End Suction Pump - 400V - Three Phase - 1783 Ltr/min. - Cast IronNKE 80-315/280 AA2F2AESBQQENWA
Non-self-priming, single-stage, centrifugal pump unit designed according to ISO 5199 with dimensions and rated performance according to EN 733. Flanges are PN 16 with dimensions according to EN 1092-2. The pump has an axial suction port, a radial discharge port and horizontal shaft. It is of the back pull-out design enabling removal of the motor, coupling, bearing bracket and impeller without disturbing the pump housing or pipework. The unbalanced rubber bellows seal is according to DIN EN 12756. The pump is equipped with a foot-mounted, fan-cooled, permanent-magnet synchronous motor. Pump and motor are mounted on a common base frame. The pump is equipped with a foot-mounted, fan-cooled asynchronous motor. Pump and motor are mounted on a common base frame. The motor includes a frequency converter and PI controller in the motor terminal box. This enables continuously variable control of the motor speed, which again enables adaptation of the performance to a given requirement.
Suitable for: Commercial heating, Commercial air conditioning, Commercial water pressure boosting, District heating, District cooling, Machining, Process liquids transfer, Industrial heating, Industrial cooling, Industrial water supply and transfer, Industrial process water treatment, Desalination, Surface water intake, Drinking water treatment, Water distribution, Irrigation, Community water supply, Wastewater treatment
6 week lead time
Free Standard Delivery
-
98951018
Grundfos - NKE 80-315/305AA2F2AESBQQEOW3 Long Coupled Single Stage End Suction Pump - 400V - Three Phase - 2085 Ltr/min. - Cast IronNKE 80-315/305 AA2F2AESBQQEOWA
Non-self-priming, single-stage, centrifugal pump unit designed according to ISO 5199 with dimensions and rated performance according to EN 733. Flanges are PN 16 with dimensions according to EN 1092-2. The pump has an axial suction port, a radial discharge port and horizontal shaft. It is of the back pull-out design enabling removal of the motor, coupling, bearing bracket and impeller without disturbing the pump housing or pipework. The unbalanced rubber bellows seal is according to DIN EN 12756. The pump is equipped with a foot-mounted, fan-cooled, permanent-magnet synchronous motor. Pump and motor are mounted on a common base frame. The pump is equipped with a foot-mounted, fan-cooled asynchronous motor. Pump and motor are mounted on a common base frame. The motor includes a frequency converter and PI controller in the motor terminal box. This enables continuously variable control of the motor speed, which again enables adaptation of the performance to a given requirement.
Suitable for: Commercial heating, Commercial air conditioning, Commercial water pressure boosting, District heating, District cooling, Machining, Process liquids transfer, Industrial heating, Industrial cooling, Industrial water supply and transfer, Industrial process water treatment, Desalination, Surface water intake, Drinking water treatment, Water distribution, Irrigation, Community water supply, Wastewater treatment
6 week lead time
Free Standard Delivery
-
99495748
Grundfos - NKE 80-315/320AA2F2AESBQQEPW3 Long Coupled Single Stage End Suction Pump - 400V - Three Phase - 2305 Ltr/min. - Cast IronNKE 80-315/320 AHA2F2AESBQQEPW3
Non-self-priming, single-stage, centrifugal pump unit designed according to ISO 5199 with dimensions and rated performance according to EN 733. Flanges are PN 16 with dimensions according to EN 1092-2. The pump has an axial suction port, a radial discharge port and horizontal shaft. It is of the back pull-out design enabling removal of the motor, coupling, bearing bracket and impeller without disturbing the pump housing or pipework. The unbalanced rubber bellows seal is according to DIN EN 12756. The pump is equipped with a foot-mounted, fan-cooled asynchronous motor. Pump and motor are mounted on a common base frame.
Suitable for: Commercial heating, Commercial air conditioning, Commercial water pressure boosting, District heating, District cooling, Machining, Process liquids transfer, Industrial heating, Industrial cooling, Industrial water supply and transfer, Industrial process water treatment, Desalination, Surface water intake, Drinking water treatment, Water distribution, Irrigation, Community water supply, Wastewater treatment
6 week lead time
Free Standard Delivery
-
99104808
Grundfos - NKE 80-400/347AA2F2AESBQQEPW3 Long Coupled Single Stage End Suction Pump - 400V - Three Phase - 1901 Ltr/min. - Cast IronNKE 80-400/347 AHA2F2AESBQQEPW3
Non-self-priming, single-stage, centrifugal pump unit designed according to ISO 5199 with dimensions and rated performance according to EN 733. Flanges are PN 16 with dimensions according to EN 1092-2. The pump has an axial suction port, a radial discharge port and horizontal shaft. It is of the back pull-out design enabling removal of the motor, coupling, bearing bracket and impeller without disturbing the pump housing or pipework. The unbalanced rubber bellows seal is according to DIN EN 12756. The pump is equipped with a foot-mounted, fan-cooled asynchronous motor. Pump and motor are mounted on a common base frame.
Suitable for: Commercial heating, Commercial air conditioning, Commercial water pressure boosting, District heating, District cooling, Machining, Process liquids transfer, Industrial heating, Industrial cooling, Industrial water supply and transfer, Industrial process water treatment, Desalination, Surface water intake, Drinking water treatment, Water distribution, Irrigation, Community water supply, Wastewater treatment
6 week lead time
Free Standard Delivery
-
97904692
Grundfos - D221.84x3,53, HNBR Replacement O-RingGrundfos D221.84x3,53, HNBR Replacement O-Ring.
The Grundfos D221.84x3,53, HNBR Replacement O-Ring is a Spares - O Ring item.
This product is manufactured by Grundfos.Grundfos (est. 1945) is a Danish pump manufacturer known for high-efficiency circulators, multistage boosters, borehole and wastewater pumps, plus packaged pressure systems. The range covers HVAC circulation, domestic hot water recirculation, pressure boosting, industrial water transfer and public water management, with strong focus on energy efficiency and intelligent controls.
In stock
Free Standard Delivery
-
97757673
Grundfos - EPDM 278.99x3,53 Replacement O-RingGrundfos EPDM 278.99x3,53 Replacement O-Ring Compatible with Grundfos NB, NBE, NBE Series 2000, NBG & NGBE pumps.
The Grundfos EPDM 278.99x3,53 Replacement O-Ring is a Spares - O Ring item.
This product is manufactured by Grundfos.Grundfos (est. 1945) is a Danish pump manufacturer known for high-efficiency circulators, multistage boosters, borehole and wastewater pumps, plus packaged pressure systems. The range covers HVAC circulation, domestic hot water recirculation, pressure boosting, industrial water transfer and public water management, with strong focus on energy efficiency and intelligent controls.
In stock
-
97757675
Grundfos - EPDM 329.79x3,53 Replacement O-RingGrundfos EPDM 329.79x3,53 Replacement O-Ring Compatible with Grundfos NB, NBE, NBE Series 2000, NBG & NGBE pumps.
The Grundfos EPDM 329.79x3,53 Replacement O-Ring is a Spares item.
This product is manufactured by Grundfos.Grundfos (est. 1945) is a Danish pump manufacturer known for high-efficiency circulators, multistage boosters, borehole and wastewater pumps, plus packaged pressure systems. The range covers HVAC circulation, domestic hot water recirculation, pressure boosting, industrial water transfer and public water management, with strong focus on energy efficiency and intelligent controls.
In stock
-
97757676
Grundfos - EPDM 430.66x3,53 Replacement O-RingGrundfos EPDM 430.66x3,53 Replacement O-Ring Compatible with Grundfos NB, NBE, NBE Series 2000, NBG & NBGE Pumps.
The Grundfos EPDM 430.66x3,53 Replacement O-Ring is a Spares item.
This product is manufactured by Grundfos.Grundfos (est. 1945) is a Danish pump manufacturer known for high-efficiency circulators, multistage boosters, borehole and wastewater pumps, plus packaged pressure systems. The range covers HVAC circulation, domestic hot water recirculation, pressure boosting, industrial water transfer and public water management, with strong focus on energy efficiency and intelligent controls.
In stock
Free Standard Delivery
-
97757677
Grundfos - EPDM 456.06x3,53 Replacement O-RingGrundfos EPDM 456.06x3,53 Replacement O-Ring Compatible with Grundfos NB, NBE, NBE Series 2000, NBG & NBGE Series pumps.
The Grundfos EPDM 456.06x3,53 Replacement O-Ring is a Spares item.
This product is manufactured by Grundfos.Grundfos (est. 1945) is a Danish pump manufacturer known for high-efficiency circulators, multistage boosters, borehole and wastewater pumps, plus packaged pressure systems. The range covers HVAC circulation, domestic hot water recirculation, pressure boosting, industrial water transfer and public water management, with strong focus on energy efficiency and intelligent controls.
In stock
-
97757679
Grundfos - EPDM 548x6 Replacement O-ringGrundfos EPDM 548x6 Replacement O-Ring Compatible with Grundfos NB, NBE, NBE Series 2000, NBG & NBGE Series Pumps.
The Grundfos EPDM 548x6 Replacement O-ring is a Spares item.
This product is manufactured by Grundfos.Grundfos (est. 1945) is a Danish pump manufacturer known for high-efficiency circulators, multistage boosters, borehole and wastewater pumps, plus packaged pressure systems. The range covers HVAC circulation, domestic hot water recirculation, pressure boosting, industrial water transfer and public water management, with strong focus on energy efficiency and intelligent controls.
In stock
Free Standard Delivery
-
97757697
Grundfos - FKM 177.39x3.53 Replacement O-RingGrundfos FKM 177.39x3.53 Replacement O-Ring Compatible with Grundfos NB, NBE, NBE Series 2000, NBG, NBGE, NKE, NKE Series 2000, NK Bare Shaft, NKG, NKGE, NKG Bare Shaft Series Pumps.
The Grundfos FKM 177.39x3.53 Replacement O-Ring is a Spares item.
This product is manufactured by Grundfos.Grundfos (est. 1945) is a Danish pump manufacturer known for high-efficiency circulators, multistage boosters, borehole and wastewater pumps, plus packaged pressure systems. The range covers HVAC circulation, domestic hot water recirculation, pressure boosting, industrial water transfer and public water management, with strong focus on energy efficiency and intelligent controls.
In stock
Free Standard Delivery
-
97757698
Grundfos - FKM 221.84x3.53 Replacement O-RingGrundfos FKM 221.84x3.53 Replacement O-Ring Compatible With Grundfos NB, NBE, NBE Series 2000, NBG, NBGE, NK, NKE, NKE Series 2000, NK Bare Shaft, NKG, NKGE Bare Shaft Series Pumps.
The Grundfos FKM 221.84x3.53 Replacement O-Ring is a Spares item.
This product is manufactured by Grundfos.Grundfos (est. 1945) is a Danish pump manufacturer known for high-efficiency circulators, multistage boosters, borehole and wastewater pumps, plus packaged pressure systems. The range covers HVAC circulation, domestic hot water recirculation, pressure boosting, industrial water transfer and public water management, with strong focus on energy efficiency and intelligent controls.
In stock
Free Standard Delivery















