-
96514873
Grundfos - MTR 1 7/7 A W A HUUV Vertical Multi-Stage Immersible Pump - 415V - Three Phase - 7 StageMTR 1-7/7 A-W-A-HUUV
multi-stage, immersible, self-priming, centrifugal pump unit for vertical installation in tanks etc. The pump head and base are in Cast Iron – all other wetted parts are in Stainless Steel. The pump has the following characteristics:
A cartridge shaft seal ensures high reliability, safe handling, and straightforward access and service. The pump is equipped with a 3-phase, fan-cooled asynchronous motor.- Power transmission via sintered metal split coupling
- Mechanical shaft seal according to EN 12756
- Impellers, intermediate chambers and spline shaft are made of Stainless Steel
- Dimensions according to DIN 5440
Suitable for: Machining
6 week lead time
Free Standard Delivery
-
96536484
Grundfos - CRN 64-1 A F H E HQQE Vertical Multi-Stage Pump - 415V - Three Phase - 1434 Ltr/min. - Stainless SteelCRN 64-1 A-F-H-E-HQQE
Vertical, multi-stage centrifugal pump unit with inlet and outlet ports on same the level (inline). Pump materials in contact with the liquid are in high-grade Stainless Steel. A cartridge shaft seal ensures high reliability, safe handling, and straightforward access and service. Power transmission is via a rigid split coupling. Pipe connection is via DIN flanges. The pump is equipped with a 3-phase, fan-cooled asynchronous motor.
Suitable for: Commercial heating, Commercial air conditioning, Commercial water pressure boosting, District heating, District cooling, Machining, Industrial cleaning process, Process liquids transfer, Industrial heating, Industrial cooling, Industrial water supply and transfer, Industrial wastewater treatment and reuse, Industrial process water treatment, Desalination, Reverse osmosis, Surface water intake, Drinking water treatment, Water distribution, Irrigation, Solar water solutions, Community water supply
In stock
Free Standard Delivery
-
96527786
Grundfos - CRN 15-5 A FGJ H E HQQE Vertical Multi-Stage Pump - 415V - Three Phase - 397 Ltr/min. - Stainless SteelCRN 15-5 A-FGJ-H-E-HQQE
Vertical, multi-stage centrifugal pump unit with inlet and outlet ports on same the level (inline). Pump materials in contact with the liquid are in high-grade Stainless Steel. A cartridge shaft seal ensures high reliability, safe handling, and straightforward access and service. Power transmission is via a rigid split coupling. Pipe connection is via combined DIN-ANSI-JIS flanges. The pump is equipped with a 3-phase, fan-cooled asynchronous motor.
Suitable for: Commercial heating, Commercial air conditioning, Commercial water pressure boosting, District heating, District cooling, Machining, Industrial cleaning process, Process liquids transfer, Industrial heating, Industrial cooling, Industrial water supply and transfer, Industrial wastewater treatment and reuse, Industrial process water treatment, Desalination, Reverse osmosis, Surface water intake, Drinking water treatment, Water distribution, Irrigation, Solar water solutions, Community water supply
In stock
Free Standard Delivery
-
98349249
Grundfos - MTR 32 6/6 A W A HUUV Vertical Multi-Stage Immersible Pump - 415V - Three Phase - 6 StageMTR 32-6/6 A-F-A-HUUV
multi-stage, immersible, self-priming, centrifugal pump unit for vertical installation in tanks etc. The pump head and base are in Cast Iron – all other wetted parts are in Stainless Steel. The pump has the following characteristics:
A cartridge shaft seal ensures high reliability, safe handling, and straightforward access and service. The pump is equipped with a 3-phase, fan-cooled asynchronous motor.- Power transmission via sintered metal split coupling
- Mechanical shaft seal according to EN 12756
- Impellers, intermediate chambers and spline shaft are made of Stainless Steel
- Dimensions according to DIN 5440
Suitable for: Machining
6 week lead time
Free Standard Delivery
-
96514870
Grundfos - MTR 1 4/4 A W A HUUV Vertical Multi-Stage Immersible Pump - 415V - Three Phase - 4 StageMTR 1-4/4 A-W-A-HUUV
multi-stage, immersible, self-priming, centrifugal pump unit for vertical installation in tanks etc. The pump head and base are in Cast Iron – all other wetted parts are in Stainless Steel. The pump has the following characteristics:
A cartridge shaft seal ensures high reliability, safe handling, and straightforward access and service. The pump is equipped with a 3-phase, fan-cooled asynchronous motor.- Power transmission via sintered metal split coupling
- Mechanical shaft seal according to EN 12756
- Impellers, intermediate chambers and spline shaft are made of Stainless Steel
- Dimensions according to DIN 5440
Suitable for: Machining
6 week lead time
Free Standard Delivery
-
96533258
Grundfos - CRN 3-11 A P A E HQQE Vertical Multi-Stage Pump - 240V - Single Phase - 74 Ltr/min. - Stainless SteelCRN 3-11 A-P-A-E-HQQE
Vertical, multi-stage centrifugal pump unit with inlet and outlet ports on same the level (inline). Pump materials in contact with the liquid are in high-grade Stainless Steel. A cartridge shaft seal ensures high reliability, safe handling, and straightforward access and service. Power transmission is via a rigid split coupling. Pipe connection is via PJE (Victaulic®) couplings. The pump is equipped with a 1-phase, fan-cooled asynchronous motor.
Suitable for: Commercial heating, Commercial air conditioning, Commercial water pressure boosting, District heating, District cooling, Machining, Industrial cleaning process, Process liquids transfer, Industrial heating, Industrial cooling, Industrial water supply and transfer, Industrial wastewater treatment and reuse, Industrial process water treatment, Desalination, Reverse osmosis, Surface water intake, Drinking water treatment, Water distribution, Irrigation, Solar water solutions, Community water supply
In stock
Free Standard Delivery
-
98511267
Grundfos - MTR 3 9/9 A W A HUUV Vertical Multi-Stage Immersible Pump - 415V - Three Phase - 9 StageMTR 3-9/9 A-W-A-HUUV
multi-stage, immersible, self-priming, centrifugal pump unit for vertical installation in tanks etc. The pump head and base are in Cast Iron – all other wetted parts are in Stainless Steel. The pump has the following characteristics:
A cartridge shaft seal ensures high reliability, safe handling, and straightforward access and service. The pump is equipped with a 3-phase, fan-cooled asynchronous motor.- Power transmission via sintered metal split coupling
- Mechanical shaft seal according to EN 12756
- Impellers, intermediate chambers and spline shaft are made of Stainless Steel
- Dimensions according to DIN 5440
Suitable for: Machining
6 week lead time
Free Standard Delivery
-
98699057
Grundfos - SP9-16 Submersible Borehole Pump - 415V - Three Phase - 193 Ltr/min. - Stainless SteelSP 9-16
Submersible borehole pump unit, appropriate for pumping clean water. Can be installed vertically or horizontally. All steel components are made in Stainless Steel, EN 1.4301 (AISI 304), that ensures high corrosive resistance. This pump carries drinking water approval.
Suitable for: Domestic ground water intake, Domestic water pressure boosting, Ground water intake, Irrigation, Community water supply
In stock
Free Standard Delivery
-
19001902
Grundfos - SP95-2 Submersible Borehole Pump - 415V - Three Phase - 2051 Ltr/min. - Stainless Steel - 9.2kWSP 95-2
Submersible borehole pump unit, appropriate for pumping clean water. Can be installed vertically or horizontally. All steel components are made in Stainless Steel, EN 1.4301 (AISI 304), that ensures high corrosive resistance. This pump carries drinking water approval. The pump is equipped with a 9.2 KW MS6000 motor with sand shield, mechanical shaft seal, water-lubricated journal bearings and a volume compensating diaphragm. The motor is a canned type submersible motor offering good mechanical stability and high efficiency. appropriate for temperatures up to 40 °C. The motor is fitted with the Grundfos Tempcon sensor that, by use of powerline communication together with a MP204 control panel, enables temperature monitoring. The motor is for direct-on-line starting (DOL).
Suitable for: Domestic ground water intake, Domestic water pressure boosting, Ground water intake, Irrigation, Community water supply
In stock
Free Standard Delivery
-
96514858
Grundfos - MTR 1S 19/19 A W A HUUV Vertical Multi-Stage Immersible Pump - 415V - Three Phase - 19 StageMTR 1S-19/19 A-W-A-HUUV
multi-stage, immersible, self-priming, centrifugal pump unit for vertical installation in tanks etc. The pump head and base are in Cast Iron – all other wetted parts are in Stainless Steel. The pump has the following characteristics:
A cartridge shaft seal ensures high reliability, safe handling, and straightforward access and service. The pump is equipped with a 3-phase, fan-cooled asynchronous motor.- Power transmission via sintered metal split coupling
- Mechanical shaft seal according to EN 12756
- Impellers, intermediate chambers and spline shaft are made of Stainless Steel
- Dimensions according to DIN 5440
Suitable for: Machining
6 week lead time
Free Standard Delivery
-
99221226
Grundfos - MAGNA1 25-100N (180) Variable Speed Circulator Pump - 240V - Single Phase - 158 Ltr/min. - Stainless SteelMAGNA1 25-100 N
The Grundfos MAGNA1 circulator pump is the uncomplicated option for a job well done. With its high energy efficiency, the product complies with the EuP 2015 regulations, ensuring substantial savings on electricity. With its intuitive, user-friendly interface and maintenance-free design, MAGNA1 is the well-suited circulator pump for basic performance needs in applications where basic system control and monitoring are desired.
With this range of circulator pumps, everything from setup to basic control and monitoring are made straightforward. The pump is maintenance-free due to the canned-rotor type design. MAGNA1 offers the possibility of monitoring the pump via the fault relay output. The digital start and stop input remotely controls the pump. The pump communicates wirelessly with the Grundfos GO Remote app. MAGNA1 can work as the main pump in both heating and cooling applications, including:
- small chiller applications
- ground-source heat pump systems
- air-conditioning surfaces
- heating surfaces
- mixing loops
MAGNA1 is a single-phase pump characterised by the controller and operating panel being integrated in the control box. The pump housing is available in both cast-iron and stainless-steel versions. The composite rotor can is carbon-fibre reinforced, the bearing plate and rotor cladding are made of Stainless Steel and the stator housing is made of aluminium. The power electronics are air-cooled.
The pump incorporates a 4-pole synchronous, permanent-magnet motor (PM motor). This motor type is characterised by higher efficiency than a conventional asynchronous squirrel-cage motor. The pump speed is controlled by an integrated frequency converter.
Suitable for: Domestic hot water recirculation
In stock
Free Standard Delivery
-
96516037
Grundfos - CRN 1s-4 A P A E HQQE Vertical Multi-Stage Pump - 415V - Three Phase - 18 Ltr/min. - Stainless SteelCRN 1S-4 A-P-A-E-HQQE
Vertical, multi-stage centrifugal pump unit with inlet and outlet ports on same the level (inline). Pump materials in contact with the liquid are in high-grade Stainless Steel. Power transmission is via a rigid split coupling. Pipe connection is via PJE (Victaulic®) couplings. The pump is equipped with a 3-phase, fan-cooled asynchronous motor.
Suitable for: Commercial heating, Commercial air conditioning, Commercial water pressure boosting, District heating, District cooling, Machining, Industrial cleaning process, Process liquids transfer, Industrial heating, Industrial cooling, Industrial water supply and transfer, Industrial wastewater treatment and reuse, Industrial process water treatment, Desalination, Reverse osmosis, Surface water intake, Drinking water treatment, Water distribution, Irrigation, Solar water solutions, Community water supply
In stock
Free Standard Delivery
-
98112551
Grundfos - TPED 32-320/2 A-F-A-BQQE-IDB Twin Head In-Line Circulator Pump - 415V - Three Phase - 316 Ltr/min. - Cast IronTPED 32-320/2 A-F-A-BQQE-IWB
Single-stage, close-coupled, volute twin-head pump unit with in-line suction and discharge ports of identical diameter. The twin-head pump is designed with two parallel power-heads. The pump is of the top-pull-out design, i.e. the power head (motor, pump head and impeller) can be removed for maintenance or service while the pump housing remains in the pipework. Each power head is fitted with an unbalanced rubber bellows seal. The shaft seal is according to EN 12756. All pipework connection is via PN 16 DIN flanges (EN 1092-2 and ISO 7005-2). Each power head is fitted with a fan-cooled, permanent-magnet synchronous motor of identical size. Each power head is fitted with a fan-cooled asynchronous motor of indentical size. The motor efficiency is classified as IE5 in accordance with IEC 60034-30-2.
Suitable for: Commercial air conditioning
In stock
Free Standard Delivery
-
16A01907
Grundfos - SP77-7 Submersible Borehole Pump - 415V - Three Phase - 1668 Ltr/min.Grundfos SP are submersible borehole pumps, designed for pumping groundwater. Grundfos SP are all stainless-steel pumps, and they are available in 3 material grades. The pumps are suitable for boreholes in sizes ranging from 4" over 6" and 8" to 10". The motor sizes for the pumps are available in 0.37-250 kW.
In stock
Free Standard Delivery
-
96501953
Grundfos - CRN 15-8 A P A E HQQE Vertical Multi-Stage Pump - 415V - Three Phase - 397 Ltr/min. - Stainless SteelCRN 15-8 A-P-A-E-HQQE
Vertical, multi-stage centrifugal pump unit with inlet and outlet ports on same the level (inline). Pump materials in contact with the liquid are in high-grade Stainless Steel. A cartridge shaft seal ensures high reliability, safe handling, and straightforward access and service. Power transmission is via a rigid split coupling. Pipe connection is via PJE (Victaulic®) couplings. The pump is equipped with a 3-phase, fan-cooled asynchronous motor.
Suitable for: Commercial heating, Commercial air conditioning, Commercial water pressure boosting, District heating, District cooling, Machining, Industrial cleaning process, Process liquids transfer, Industrial heating, Industrial cooling, Industrial water supply and transfer, Industrial wastewater treatment and reuse, Industrial process water treatment, Desalination, Reverse osmosis, Surface water intake, Drinking water treatment, Water distribution, Irrigation, Solar water solutions, Community water supply
In stock
Free Standard Delivery
-
12A01920
Grundfos - SP17-20 Submersible Borehole Pump - 415V - Three Phase - 366 Ltr/min.Grundfos SP are submersible borehole pumps, designed for pumping groundwater. Grundfos SP are all stainless-steel pumps, and they are available in 3 material grades. The pumps are suitable for boreholes in sizes ranging from 4" over 6" and 8" to 10". The motor sizes for the pumps are available in 0.37-250 kW.
In stock
Free Standard Delivery















