-
97924452
Grundfos - MAGNA3 D 32-100 (180) Variable Speed Circulator Pump - 240V - Single Phase - 173 Ltr/min. - Cast IronMAGNA3 D 32-100
The Grundfos MAGNA3 D circulator pump is the well-suited choice for almost any building project – old or new. With its unrivalled energy efficiency, all-encompassing range and built-in communication capabilities, MAGNA3 D is well-suited for engineers and specifiers looking to create high-performance heating and cooling systems. The pump is maintenance-free due to the canned-rotor type design. This also means that pump and motor form an integral unit without shaft seal and with only two gaskets for sealing. The bearings are lubricated by the pumped liquid. MAGNA3 D offers three multipump modes: Alternating, backup and cascade operation.
In alternating and backup operation, only one pump operates at a time to ensure constant comfort. In alternating operation, the change from one pump to the other depends on time or energy. If a pump fails, the other pump will take over automatically. In backup operation, the backup pump is operated at intervals to prevent seizing. If the duty pump stops due to a fault, the backup pump will start automatically. In cascade operation, the pumps automatically switch on and off, adapting to the current consumption in the system. The two pumps communicate wirelessly. MAGNA3 D features an intuitive display and allows you to connect wirelessly with the Grundfos GO Remote app, giving you access to enhanced reporting and monitoring. MAGNA3 model E has Bluetooth, which allows you to connect directly to the Grundfos GO app on your smart phone without any need for a dongle. The pump includes fieldbus communication via CIM modules as well as analogue and digital inputs and configurable relays. Control features include AUTOADAPT and FLOWADAPT. FLOWADAPT reduces the need for throttling valves, thus cutting costs on system components. MAGNA3 D is the superior choice for a wide range of heating and cooling applications, including:
MAGNA3 D is a single-phase pump characterised by the controller and display being integrated in the control box. The pump also has a built-in differential pressure and temperature sensor. The pump housing is available in both cast-iron and stainless-steel versions. The composite rotor can is carbon-fibre reinforced, the bearing plate and rotor cladding are made of Stainless Steel and the stator housing is made of aluminium. The power electronics are air-cooled. MAGNA3 incorporates a 4-pole synchronous, permanent-magnet motor (PM motor). This motor type is characterised by higher efficiency than a conventional asynchronous squirrel-cage motor. The pump speed is controlled by an integrated frequency converter.- small chiller applications
- ground-source heat pump systems
- air conditioning surfaces
- heating surfaces
- mixing loops
Suitable for: Commercial heating, Commercial air conditioning, District heating, District cooling, Domestic heating, Industrial heating
In stock
Free Standard Delivery
-
98825707
Grundfos - MTR 8 11/11 A W A HUUV Vertical Multi-Stage Immersible Pump - 415V - Three Phase - 11 StageMTR 8-11/11 A-W-A-HUUV
Multistage, immersible, self-priming, centrifugal Pump for vertical setup in tanks etc. The Pump head and base are in Cast Iron – all other wetted parts are in Stainless Steel.
- Suitable for Machining,
- The impeller is manufactured from Stainless Steel
- Maximum operating pressure: 25 Bar.
- Temperature liquid range: -10 .. 90 °C.
- Approvals include CE,EAC,UKCA,RCM,Morocco
6 week lead time
Free Standard Delivery
-
96516347
Grundfos - CRI 1-11 A CA I V HQQV Vertical Multi-Stage Pump - 415V - Three Phase - 40 Ltr/min. - Stainless SteelCRI 1-11 A-CA-A-V-HQQV
Vertical, multi-stage centrifugal pump unit with inlet and outlet ports on same the level (inline). Pump materials in contact with the liquid are in Stainless Steel. A cartridge shaft seal ensures high reliability, safe handling, and straightforward access and service. Power transmission is via a rigid split coupling. Pipe connection is via FlexiClamps. The pump is equipped with a 3-phase, fan-cooled asynchronous motor.
Suitable for: Commercial heating, Commercial air conditioning, Commercial water pressure boosting, District heating, District cooling, Machining, Industrial cleaning process, Process liquids transfer, Industrial heating, Industrial cooling, Industrial water supply and transfer, Industrial wastewater treatment and reuse, Industrial process water treatment, Desalination, Reverse osmosis, Surface water intake, Drinking water treatment, Water distribution, Irrigation, Solar water solutions, Community water supply
In stock
Free Standard Delivery
-
96531653
Grundfos - CRN 5-5 A FGJ H E HQQE Vertical Multi-Stage Pump - 415V - Three Phase - 140 Ltr/min. - Stainless SteelCRN 5-5 A-FGJ-H-E-HQQE
Vertical, multi-stage centrifugal pump unit with inlet and outlet ports on same the level (inline). Pump materials in contact with the liquid are in high-grade Stainless Steel. A cartridge shaft seal ensures high reliability, safe handling, and straightforward access and service. Power transmission is via a rigid split coupling. Pipe connection is via combined DIN-ANSI-JIS flanges. The pump is equipped with a 3-phase, fan-cooled asynchronous motor.
Suitable for: Commercial heating, Commercial air conditioning, Commercial water pressure boosting, District heating, District cooling, Machining, Industrial cleaning process, Process liquids transfer, Industrial heating, Industrial cooling, Industrial water supply and transfer, Industrial wastewater treatment and reuse, Industrial process water treatment, Desalination, Reverse osmosis, Surface water intake, Drinking water treatment, Water distribution, Irrigation, Solar water solutions, Community water supply
In stock
Free Standard Delivery
-
96536114
Grundfos - CRN 32-1 A F H E HQQE Vertical Multi-Stage Pump - 415V - Three Phase - 676 Ltr/min. - Stainless SteelCRN 32-1 A-F-H-E-HQQE
Vertical, multi-stage centrifugal pump unit with inlet and outlet ports on same the level (inline). Pump materials in contact with the liquid are in high-grade Stainless Steel. A cartridge shaft seal ensures high reliability, safe handling, and straightforward access and service. Power transmission is via a rigid split coupling. Pipe connection is via DIN flanges. The pump is equipped with a 3-phase, fan-cooled asynchronous motor.
Suitable for: Commercial heating, Commercial air conditioning, Commercial water pressure boosting, District heating, District cooling, Machining, Industrial cleaning process, Process liquids transfer, Industrial heating, Industrial cooling, Industrial water supply and transfer, Industrial wastewater treatment and reuse, Industrial process water treatment, Desalination, Reverse osmosis, Surface water intake, Drinking water treatment, Water distribution, Irrigation, Solar water solutions, Community water supply
In stock
Free Standard Delivery
-
14A01906
Grundfos - SP60-6 Submersible Borehole Pump - 415V - Three Phase - 1301 Ltr/min.Grundfos SP are submersible borehole pumps, designed for pumping groundwater. Grundfos SP are all stainless-steel pumps, and they are available in 3 material grades. The pumps are suitable for boreholes in sizes ranging from 4" over 6" and 8" to 10". The motor sizes for the pumps are available in 0.37-250 kW.
In stock
Free Standard Delivery
-
99133613
Grundfos - TPED 32-230/2 S-A-F-A-BQQE-FAB Twin Head In-Line Circulator Pump - 240V - Single Phase - 166 Ltr/min.TPED 32-230/2 S-A-F-A-BQQE-FWB
Single-stage, close-coupled, volute twin-head pump unit with in-line suction and discharge ports of identical diameter. The twin-head pump is designed with two parallel power-heads. The pump is of the top-pull-out design, i.e. the power head (motor, pump head and impeller) can be removed for maintenance or service while the pump housing remains in the pipework. Each power head is fitted with an unbalanced rubber bellows seal. The shaft seal is according to EN 12756. All pipework connection is via PN 6/10 DIN flanges (EN 1092-2 and ISO 7005-2). Each power head is fitted with a fan-cooled, permanent-magnet synchronous motor of identical size. Each power head is fitted with a fan-cooled asynchronous motor of indentical size. The motor efficiency is classified as IE5 in accordance with IEC 60034-30-2. The motor includes a frequency converter and PI controller in the motor terminal box. This enables continuously variable control of the motor speed, which again enables adaptation of the performance to a given requirement. The pump is equipped with a differential pressure sensor.
Suitable for: Commercial heating, Commercial air conditioning, District heating, District cooling, Industrial heating, Industrial cooling, Desalination, Drinking water treatment, Water distribution, Irrigation, Community water supply
In stock
Free Standard Delivery
-
96510143
Grundfos - SQE1-80 Submersible Borehole Pump - 240V - Single Phase - 28 Ltr/min.SQE 1-80
3" multi-stage, submersible pump unit designed for domestic water supply, liquid transfer in tanks, irrigation and environmental applications. The pump has "floating" impellers, each with its own tungsten carbide/ceramic bearing.The pump features soft starting and protection against dry-running, upthrust, overvoltage, undervoltage, overload and overtemperature.
The motor is a single-phase motor of the permanent magnet rotor type ensuring optimum efficiency within a wide load range. The motor is fitted with a replaceable end cover with socket.
Suitable for: Domestic ground water intake, Domestic water pressure boosting, Ground water intake
In stock
Free Standard Delivery
-
98901311
Grundfos - SP11-37 Submersible Borehole Pump - 415V - Three Phase - 235 Ltr/min. - Stainless SteelSP 11-37
Submersible borehole Pump, suitable for Pumping clean water. Can be installed vertically or horizontally. All steel components are made in Stainless Steel, EN 1.4301 (AISI 304), that guarantees elevated corrosive resistance. This Pump carries drinking water approval.
- Suitable for Domestic ground water intake, Domestic water pressure boosting, Ground water intake, Irrigation, Community water supply
- The impeller is manufactured from Stainless Steel
- Maximum operating pressure: 60 Bar.
- Temperature liquid range: -15 .. 40 °C.
- Approvals include CE,EAC,UKCA,SEPRO,MOROCCO
In stock
Free Standard Delivery
-
15A01907
Grundfos - SP46-7 Submersible Borehole Pump - 415V - Three Phase - 984 Ltr/min.Grundfos SP are submersible borehole pumps, designed for pumping groundwater. Grundfos SP are all stainless-steel pumps, and they are available in 3 material grades. The pumps are suitable for boreholes in sizes ranging from 4" over 6" and 8" to 10". The motor sizes for the pumps are available in 0.37-250 kW.
In stock
Free Standard Delivery
-
15A01906
Grundfos - SP46-6 Submersible Borehole Pump - 415V - Three Phase - 984 Ltr/min.Grundfos SP are submersible borehole pumps, designed for pumping groundwater. Grundfos SP are all stainless-steel pumps, and they are available in 3 material grades. The pumps are suitable for boreholes in sizes ranging from 4" over 6" and 8" to 10". The motor sizes for the pumps are available in 0.37-250 kW.
In stock
Free Standard Delivery
-
96536423
Grundfos - CRN 45-3-2 A F H E HQQE Vertical Multi-Stage Pump - 415V - Three Phase - 987 Ltr/min. - Stainless SteelCRN 45-3-2 A-F-H-E-HQQE
Vertical, multi-stage centrifugal pump unit with inlet and outlet ports on same the level (inline). Pump materials in contact with the liquid are in high-grade Stainless Steel. A cartridge shaft seal ensures high reliability, safe handling, and straightforward access and service. Power transmission is via a rigid split coupling. Pipe connection is via DIN flanges. The pump is equipped with a 3-phase, fan-cooled asynchronous motor.
Suitable for: Commercial heating, Commercial air conditioning, Commercial water pressure boosting, District heating, District cooling, Machining, Industrial cleaning process, Process liquids transfer, Industrial heating, Industrial cooling, Industrial water supply and transfer, Industrial wastewater treatment and reuse, Industrial process water treatment, Desalination, Reverse osmosis, Surface water intake, Drinking water treatment, Water distribution, Irrigation, Solar water solutions, Community water supply
In stock
Free Standard Delivery
-
98513706
Grundfos - MTR 45 6/6-2 A F A HUUV Vertical Multi-Stage Immersible Pump - 415V - Three Phase - 6 StageMTR 45-6/6-2 A-F-A-HUUV
multi-stage, immersible, self-priming, centrifugal pump unit for vertical installation in tanks etc. The pump head and base are in Cast Iron – all other wetted parts are in Stainless Steel. The pump has the following characteristics:
A cartridge shaft seal ensures high reliability, safe handling, and straightforward access and service. The pump is equipped with a 3-phase, fan-cooled asynchronous motor.- Power transmission via sintered metal split coupling
- Mechanical shaft seal according to EN 12756
- Impellers, intermediate chambers and spline shaft are made of Stainless Steel
- Dimensions according to DIN 5440
Suitable for: Machining
6 week lead time
Free Standard Delivery
-
97924342
Grundfos - MAGNA3 32-60N (180) Variable Speed Circulator Pump - 240V - Single Phase - 152 Ltr/min. - Stainless SteelMAGNA3 32-60 N
The Grundfos MAGNA3 circulator pump is the well-suited choice for almost any building project – old or new. With its unrivalled energy efficiency, all-encompassing range and built-in communication capabilities, MAGNA3 is well-suited for engineers and specifiers looking to create high-performance heating and cooling systems. The pump is maintenance-free due to the canned-rotor type design. This also means that pump and motor form an integral unit without shaft seal and with only two gaskets for sealing. The bearings are lubricated by the pumped liquid. MAGNA3 features an intuitive display and allows you to connect wirelessly with the Grundfos GO Remote app, giving you access to enhanced reporting and monitoring. MAGNA3 model E has Bluetooth, which allows you to connect directly to the Grundfos GO app on your smart phone without any need for a dongle. The pump includes fieldbus communication via CIM modules as well as analogue and digital inputs and configurable relays. Control features include AUTOADAPT and FLOWADAPT. FLOWADAPT reduces the need for throttling valves, thus cutting costs on system components. MAGNA3 is the superior choice for a wide range of heating and cooling applications, including:
MAGNA3 is a single-phase pump characterised by the controller and control display being integrated in the control box. The pump also has a built-in differential pressure and temperature sensor. The pump housing is available in both cast-iron and stainless-steel versions. The composite rotor can is carbon-fibre reinforced, the bearing plate and rotor cladding are made of Stainless Steel and the stator housing is made of aluminium. The power electronics are air-cooled. MAGNA3 incorporates a 4-pole synchronous, permanent-magnet motor (PM motor). This motor type is characterised by higher efficiency than a conventional asynchronous squirrel-cage motor. The pump speed is controlled by an integrated frequency converter.- small chiller applications
- ground-source heat pump systems
- air conditioning surfaces
- heating surfaces
- mixing loops
Suitable for: Domestic hot water recirculation
In stock
Free Standard Delivery
-
08001K18
Grundfos - SP1A-18 Submersible Borehole Pump - 415V - Three Phase - 25 Ltr/min.Grundfos SP are submersible borehole pumps, designed for pumping groundwater. Grundfos SP are all stainless-steel pumps, and they are available in 3 material grades. The pumps are suitable for boreholes in sizes ranging from 4" over 6" and 8" to 10". The motor sizes for the pumps are available in 0.37-250 kW.
In stock
Free Standard Delivery
-
99114631
Grundfos - TPED 100-90/4 A-F-A-BQQE-IDA Twin Head Centrifugal Pump - 415V - Three Phase - 1968 Ltr/min. - Cast IronTPED 100-90/4 A-F-A-BQQE-IWA
Single-stage, close-coupled, volute twin-head pump unit with in-line suction and discharge ports of identical diameter. The twin-head pump is designed with two parallel power-heads. The pump is of the top-pull-out design, i.e. the power head (motor, pump head and impeller) can be removed for maintenance or service while the pump housing remains in the pipework. Each power head is fitted with an unbalanced rubber bellows seal. The shaft seal is according to EN 12756. All pipework connection is via PN 16 DIN flanges (EN 1092-2 and ISO 7005-2). Each power head is fitted with a fan-cooled, permanent-magnet synchronous motor of identical size. Each power head is fitted with a fan-cooled asynchronous motor of indentical size. The motor efficiency is classified as IE5 in accordance with IEC 60034-30-2.
Suitable for: Commercial air conditioning
In stock
Free Standard Delivery















