-
GR-98699339
Grundfos - SP14-4 Submersible Borehole Pump - 240V - Stainless Steel - 1.1kWSP 14-4
Submersible borehole pump unit, appropriate for pumping clean water. Can be installed vertically or horizontally. All steel components are made in Stainless Steel, EN 1.4301 (AISI 304), that ensures high corrosive resistance. This pump carries drinking water approval. The pump is equipped with a 1.1 KW MS402 motor with sand shield, lip seal, water-lubricated journal bearings and a volume compensating diaphragm. The motor is a canned type submersible motor offering good mechanical stability and high efficiency. appropriate for temperatures up to 40 °C. The motor is not fitted with a temperature sensor. If temperature monitoring is desired, a Pt1000 sensor can be fitted. The motor is for direct-on-line starting (DOL).
Suitable for: Domestic ground water intake, Domestic water pressure boosting, Ground water intake, Irrigation, Community water supply
In stock
Free Standard Delivery
-
GR-98699340
Grundfos - SP14-6 Submersible Borehole Pump - 240V - Stainless Steel - 1.5kWSP 14-6
Submersible borehole pump unit, appropriate for pumping clean water. Can be installed vertically or horizontally. All steel components are made in Stainless Steel, EN 1.4301 (AISI 304), that ensures high corrosive resistance. This pump carries drinking water approval. The pump is equipped with a 1.5 KW MS402 motor with sand shield, lip seal, water-lubricated journal bearings and a volume compensating diaphragm. The motor is a canned type submersible motor offering good mechanical stability and high efficiency. appropriate for temperatures up to 40 °C. The motor is not fitted with a temperature sensor. If temperature monitoring is desired, a Pt1000 sensor can be fitted. The motor is for direct-on-line starting (DOL).
Suitable for: Domestic ground water intake, Domestic water pressure boosting, Ground water intake, Irrigation, Community water supply
In stock
Free Standard Delivery
-
GR-98699341
Grundfos - SP14-8 Submersible Borehole Pump - 240V - Stainless Steel - 2.2kWSP 14-8
Submersible borehole pump unit, appropriate for pumping clean water. Can be installed vertically or horizontally. All steel components are made in Stainless Steel, EN 1.4301 (AISI 304), that ensures high corrosive resistance. This pump carries drinking water approval.
In stock
Free Standard Delivery
-
GR-98254907
Grundfos - Magna1 25-80n 98254907 Variable Speed Circulator - 180mm - 230V - OBSOLETEMAGNA1 25-80 N
The Grundfos MAGNA1 is a circulator pump unit with permanent magnet motor and straightforward selection of pump setting. The MAGNA1 will fit both heating, cooling and domestic hot water circulation applications perfectly, making it the obvious choice for almost any building project – old or new.
The pump is a canned-rotor type, i.e. pump and motor form an integral unit without shaft seal and with only two gaskets for sealing.
The bearings are lubricated by the pumped liquid. A pump with no maintenance requirements and extremely low life cycle cost.
The pump has an intuitive user interface, which is especially fit for replacement of older circulators. The well-suited choice for basic performance needs in applications where system communication is not required.
Suitable for: Domestic hot water recirculation
Out Of StockFree Standard Delivery
-
GR-98950216
Grundfos - STR2 1.5C Bar. Twin Impeller Regenerative Shower Pump - Stainless SteelSTR2-1.5 C
Grundfos STR2-1.5 C is a regenerative shower pump with positive head and two impellers. This pump is the result of extensive research and development, resulting in a high-performance pump at an affordable price. The shower pump is continuously rated as a regenerative pump making it equipped to overcome air pockets and well-suited where the plumbing route includes multiple bends and elbows. The shower pump is used for boosting hot and cold water to single showers or uncomplicated bathroom suites where the outlets are below the cold-water tank.
This high-performance composite shower pump has an modernised design, and by incorporating a low-speed induction motor, it improves durability and ensures a long life. This design ensures minimal turbulence in the pump head. The pump is supplied with a adaptable and braided Stainless Steel connection hose making it resistant to corrosion. Anti-vibration feet, long-life carbon graphite and high-density ceramic seals ensure that the operating noise is held at a minimum. The shower pump has built-in thermal protection, which immediately stops the pump motor if it overheats.
The shower pump is a WRAS-approved product and as such the whole product has undergone and passed extensive mechanical and water quality testing. Additionally, this pump is a regenerative pump making it equipped to overcome air pockets.
- WRAS-approved product
- Anti-vibration feet for minimum operating noise
- Stainless Steel adaptable connection hose
- Long-life carbon graphite and high-density ceramic seals
- Continuously-rated regenerative pump (used in the UK)
- Low-speed and quiet induction motor for increased durability
- Regenerative impeller design to overcome air pockets
- Integrated thermal protection
In stock
Free Standard Delivery
-
GR-98950217
Grundfos - STR2 2.0C Bar. Twin Impeller Positive Regenerative Shower Pump - Stainless SteelSTR2-2.0 C
Grundfos STR2-2.0 C is a regenerative shower pump with positive head and two impellers. This pump is the result of extensive research and development, resulting in a high-performance pump at an affordable price. The shower pump is continuously rated as a regenerative pump making it equipped to overcome air pockets and well-suited where the plumbing route includes multiple bends and elbows. The shower pump is used for boosting hot and cold water to single showers or uncomplicated bathroom suites where the outlets are below the cold-water tank.
This high-performance composite shower pump has an modernised design, and by incorporating a low-speed induction motor, it improves durability and ensures a long life. This design ensures minimal turbulence in the pump head. The pump is supplied with a adaptable and braided Stainless Steel connection hose making it resistant to corrosion. Anti-vibration feet, long-life carbon graphite and high-density ceramic seals ensure that the operating noise is held at a minimum. The shower pump has built-in thermal protection, which immediately stops the pump motor if it overheats.
The shower pump is a WRAS-approved product and as such the whole product has undergone and passed extensive mechanical and water quality testing. Additionally, this pump is a regenerative pump making it equipped to overcome air pockets.
- WRAS-approved product
- Anti-vibration feet for minimum operating noise
- Stainless Steel adaptable connection hose
- Long-life carbon graphite and high-density ceramic seals
- Continuously-rated regenerative pump (used in the UK)
- Low-speed and quiet induction motor for increased durability
- Regenerative impeller design to overcome air pockets
- Integrated thermal protection
In stock
Free Standard Delivery
-
96848670
Grundfos - PM1-15 Pressure Manager - 240V - OBSOLETEPM 1
The Grundfos PM 1 pressure manager is designed for self-operating start/stop control of Grundfos pumps and other water supply pumps. The PM 1 is appropriate for applications where start/stop of the pump unit according to consumption is needed. The PM 1 starts the pump when the start pressure is reached, and the pump keeps running as long as there is a flow.
The PM 1 offers dry-running protection and cycling alarm for increased safety.
Out Of StockFree Standard Delivery
-
98395306
Grundfos - CME 3-6-I A R I E AQQE Horizontal Multi-Stage Booster Pump - 240V - Stainless SteelCME 3-6 A-R-I-E-AQQE U-A-D-N
space-efficient, dependable, horizontal, multi-stage, end-suction centrifugal pump unit with axial suction port and radial discharge port. Pump materials in contact with the liquid are in Stainless Steel. The mechanical shaft seal is a specially engineered, unbalanced O-ring seal. All pipework connection is via internal Whitworth pipe threads, Rp (ISO 7/1). The pump is equipped with a 1-phase, fan-cooled, permanent-magnet, synchronous motor. The motor efficiency is classified as IE5 in accordance with IEC 60034-30-2. The motor includes a frequency converter and PI controller in the motor terminal box. This enables continuously variable control of the motor speed, which again enables adaptation of the performance to a given requirement. An operating panel on the motor terminal box enables setting of required setpoint as well as setting of pump to "Min." or "Max." operation or to "Stop". The Grundfos Eye indicator on the operating panel provides visual indication of pump status:
Communication with the pump is possible by means of Grundfos GO Remote (accessory). The remote control enables further settings as well as reading out of a number of parameters such as "Actual value", "Speed", "Power input" and total "Power consumption". The terminal box holds terminals for these connections:- "Alarm": Motor has stopped (flashing red indicator lights)
- "Warning": Motor is still running (rotating yellow indicator lights) or has stopped (permanently yellow indicator lights)
- "Power on": Motor is running (rotating green indicator lights) or not running (permanently green indicator lights)
- interface for Grundfos CIM fieldbus module
- GENIbus connection
- two signal-relay outputs (potential-free contacts)
- 24 V voltage supply for sensors
- Grundfos Digital Sensor input and output
- one configurable digital input or open-collector output
- 5 V voltage supply to potentiometer and sensor
- two analog inputs, 0(4)-20 mA, 0-5 V, 0-10 V, 0.5 - 3.5 V
- one dedicated digital input
Suitable for: Commercial heating, Commercial air conditioning, Commercial water pressure boosting, District heating, Domestic water pressure boosting, Industrial cleaning process, Industrial heating, Industrial water supply and transfer, Desalination, Water distribution, Irrigation, Community water supply
In stock
Free Standard Delivery
-
96449746
Grundfos - 1" Oval Flange - To Suit Grundfos - CRI 1,3&5Grundfos - 1" Oval Flange - To Suit Grundfos - CRI 1,3&5
This is a Spares/Kit item, please get in touch for product compatibility.
Grundfos (est. 1945) is a Danish pump manufacturer known for high-efficiency circulators, multistage boosters, borehole and wastewater pumps, plus packaged pressure systems. The range covers HVAC circulation, domestic hot water recirculation, pressure boosting, industrial water transfer and public water management, with strong focus on energy efficiency and intelligent controls.
In stock
Free Standard Delivery
-
96577720
Grundfos - MQ 3 Fittings KitGrundfos - MQ 3 Fittings Kit
This is a Spares/Kit item, please get in touch for product compatibility.
Grundfos (est. 1945) is a Danish pump manufacturer known for high-efficiency circulators, multistage boosters, borehole and wastewater pumps, plus packaged pressure systems. The range covers HVAC circulation, domestic hot water recirculation, pressure boosting, industrial water transfer and public water management, with strong focus on energy efficiency and intelligent controls.
In stock
Free Standard Delivery
-
In stock
Free Standard Delivery
-
96848701
Grundfos - PM1-22 Pressure Manager - OBSOLETEPM 1
The Grundfos PM 1 pressure manager is designed for self-operating start/stop control of Grundfos pumps and other water supply pumps. The PM 1 is appropriate for applications where start/stop of the pump unit according to consumption is needed. The PM 1 starts the pump when the start pressure is reached, and the pump keeps running as long as there is a flow.
The PM 1 offers dry-running protection and cycling alarm for increased safety.
Out Of StockFree Standard Delivery
-
SGR-98159372
Grundfos - Blanking Plate for Magna1/ Magna3 and TPE2 DGrundfos - Blanking Plate for Magna1/ Magna3 and TPE2 D
This is a Spares/Kit item, please get in touch for product compatibility.
Grundfos (est. 1945) is a Danish pump manufacturer known for high-efficiency circulators, multistage boosters, borehole and wastewater pumps, plus packaged pressure systems. The range covers HVAC circulation, domestic hot water recirculation, pressure boosting, industrial water transfer and public water management, with strong focus on energy efficiency and intelligent controls.
In stock
Free Standard Delivery
-
98046408
Grundfos - GO MI 301 Universal Dongle for Android/ IOS SmartphonesMI 301
The Grundfos GO Remote is used to establish wireless connection to a Grundfos product, using a standard Android or iOS platform, with the Grundfos GO Remote App installed. The App is available from Apple App Store and Google Play free of charge.
The MI 301 is a module with built-in infrared and radio communication. It must be used in conjunction with an Android or iOS-based Smartphone with Bluetooth Low Energy connection. The MI 301 module has rechargeable Li-ion battery and must be charged separately.
The pump unit/assembly can be monitoried and controlled from the Grundfos GO, and it will be possible to create pdf reports. The specific functions available depend on each individual product.
Supplied with the product
- Quickguide
- Battery charger
- Grundfos MI 301
Suitable for: Domestic ground water intake, Surface water intake, Ground water intake, Drinking water treatment, Water distribution, Solar water solutions, Community water supply, Wastewater transport, Flood control, Wastewater treatment
This is a Grundfos Spares/Replacement item used for servicing and replacing compatible pump equipment.
Grundfos (est. 1945) is a Danish pump manufacturer known for high-efficiency circulators, multistage boosters, borehole and wastewater pumps, plus packaged pressure systems. The range covers HVAC circulation, domestic hot water recirculation, pressure boosting, industrial water transfer and public water management, with strong focus on energy efficiency and intelligent controls.
In stock
Free Standard Delivery
-
96106573
Grundfos - SLV.65.65.11.2.1.502 Waste Water Pump - 230V - Single Phase - Cast IronSLV.65.65 .11.2.1.502
Non-self-priming, single-stage, centrifugal pump designed for handling wastewater, process water and unscreened raw sewage. The pump is designed for intermittent and continous operations in submerged installation. The high-efficiency SuperVortex impeller provides passage of long fibres and solids up to 65 mm and is appropriate for wastewater with a dry matter content of up to 5 %. A unique stainless-steel clamp assembling system enables quick and straightforward disassembly of the pump from the motor unit for service and inspection. No special tools are required.
Suitable for: Commercial wastewater, Industrial wastewater treatment and reuse, Wastewater transport, Flood control, Wastewater treatment
In stock
Free Standard Delivery
















