-
97924248
Grundfos - Magna3 25-120 Variable Speed Circulator - 240V - Cast IronMAGNA3 25-120
The Grundfos MAGNA3 circulator pump is the well-suited choice for almost any building project – old or new. With its unrivalled energy efficiency, all-encompassing range and built-in communication capabilities, MAGNA3 is well-suited for engineers and specifiers looking to create high-performance heating and cooling systems. The pump is maintenance-free due to the canned-rotor type design. This also means that pump and motor form an integral unit without shaft seal and with only two gaskets for sealing. The bearings are lubricated by the pumped liquid. MAGNA3 features an intuitive display and allows you to connect wirelessly with the Grundfos GO Remote app, giving you access to enhanced reporting and monitoring. MAGNA3 model E has Bluetooth, which allows you to connect directly to the Grundfos GO app on your smart phone without any need for a dongle. The pump includes fieldbus communication via CIM modules as well as analogue and digital inputs and configurable relays. Control features include AUTOADAPT and FLOWADAPT. FLOWADAPT reduces the need for throttling valves, thus cutting costs on system components. MAGNA3 is the superior choice for a wide range of heating and cooling applications, including:
MAGNA3 is a single-phase pump characterised by the controller and control display being integrated in the control box. The pump also has a built-in differential pressure and temperature sensor. The pump housing is available in both cast-iron and stainless-steel versions. The composite rotor can is carbon-fibre reinforced, the bearing plate and rotor cladding are made of Stainless Steel and the stator housing is made of aluminium. The power electronics are air-cooled. MAGNA3 incorporates a 4-pole synchronous, permanent-magnet motor (PM motor). This motor type is characterised by higher efficiency than a conventional asynchronous squirrel-cage motor. The pump speed is controlled by an integrated frequency converter.- small chiller applications
- ground-source heat pump systems
- air conditioning surfaces
- heating surfaces
- mixing loops
Suitable for: Commercial heating
In stock
Free Standard Delivery
-
96824796
Grundfos - CIMM 200 Modbus Interface ModuleCIM 200 MODBUS RTU
Communication interface for Modbus RTU for automation.
The CIM 200 is a standard interface for data transmission between a Modbus RTU network and a Grundfos pump unit. It makes data exchange possible between Grundfos pump and a PLC or SCADA assembly.
Extensive amounts of datapoints are available from each product via the CIM 200. The interface offers uncomplicated system integration with both new and legacy systems, as the Modbus RTU protocol is widely supported by existing control systems and PLCs.
The CIM 200 is an add-on communication module installed internally in the Grundfos product.
Supported products:
- LC 2x1 Level controller
- CU 362 Dedicated Controls for sewage pumps
- Hydro Multi-E based on MGE model H/I/J
- CU 354 DDD controller
- CU 352 MPC controller
- MAGNA3 circulators
- E-pumps CRE/CRNE/CRIE, MTRE, CME, TPE2 / TPE3, NBE/NKE with MGE variant H/I/J and 11-22 kW
Suitable for: Commercial heating, Commercial air conditioning, Commercial water pressure boosting, Industrial water supply and transfer, Industrial wastewater treatment and reuse, Surface water intake, Water distribution, Solar water solutions, Community water supply, Wastewater transport, Wastewater treatment
In stock
Free Standard Delivery
-
97924337
Grundfos - Magna3 25-60N Variable Speed Circulator - 180mm - 240V - Stainless SteelMAGNA3 25-60 N
The Grundfos MAGNA3 circulator pump is the well-suited choice for almost any building project – old or new. With its unrivalled energy efficiency, all-encompassing range and built-in communication capabilities, MAGNA3 is well-suited for engineers and specifiers looking to create high-performance heating and cooling systems. The pump is maintenance-free due to the canned-rotor type design. This also means that pump and motor form an integral unit without shaft seal and with only two gaskets for sealing. The bearings are lubricated by the pumped liquid. MAGNA3 features an intuitive display and allows you to connect wirelessly with the Grundfos GO Remote app, giving you access to enhanced reporting and monitoring. MAGNA3 model E has Bluetooth, which allows you to connect directly to the Grundfos GO app on your smart phone without any need for a dongle. The pump includes fieldbus communication via CIM modules as well as analogue and digital inputs and configurable relays. Control features include AUTOADAPT and FLOWADAPT. FLOWADAPT reduces the need for throttling valves, thus cutting costs on system components. MAGNA3 is the superior choice for a wide range of heating and cooling applications, including:
MAGNA3 is a single-phase pump characterised by the controller and control display being integrated in the control box. The pump also has a built-in differential pressure and temperature sensor. The pump housing is available in both cast-iron and stainless-steel versions. The composite rotor can is carbon-fibre reinforced, the bearing plate and rotor cladding are made of Stainless Steel and the stator housing is made of aluminium. The power electronics are air-cooled. MAGNA3 incorporates a 4-pole synchronous, permanent-magnet motor (PM motor). This motor type is characterised by higher efficiency than a conventional asynchronous squirrel-cage motor. The pump speed is controlled by an integrated frequency converter.- small chiller applications
- ground-source heat pump systems
- air conditioning surfaces
- heating surfaces
- mixing loops
Suitable for: Domestic hot water recirculation
In stock
Free Standard Delivery
-
96765992
Grundfos - MS402 Borehole Pump Motor - Single Phase - 1.5kwSuitable for: Community water supply
In stock
Free Standard Delivery
-
99415672
Grundfos - ALPHA1 15-50/60 A Rated Domestic Circulator - 240V - Cast IronALPHA1 15-50/60 130
Elevated-performance circulators engineered for circulating liquids in heating installations. With an energy performance index (EEI) at the ErP benchmark for most high‑performing circulators, it contributes to energy savings.
The ideal choice for basic functionality needs.
Features:
- Suitable for Commercial heating, Domestic heating, Industrial heating,
- This product's housing material is Cast Iron
- The impeller is manufactured from Composite
- Maximum operating pressure: 10 Bar.
- Temperature liquid range: 2 .. 110 °C.
- Approvals include CE,VDE,UKCA
In stock
Free Standard Delivery
-
MAG3-97924247
Grundfos - Magna3 25-100 Variable Speed Circulator - 180mm - 240VVariable Speed Single Head Circulator 240V. The MAGNA3 is a single-phase pump with no maintenance requirements suitable for hot water service circulation with extremely low Life Cycle Cost.
In stock
Free Standard Delivery
-
96611525
Grundfos - DPI/--0-2.5b/1/ G/D.900-B/V-5/-B/02B/SD-1 Transducer Kit - Stainless SteelDPI/--0-2.5b/1/ G/D.900-B/V-5/-B/02B/SD-1
The transmitter is made of 1.4404 Stainless Steel.
In stock
Free Standard Delivery
-
96611526
Grundfos - DPI/--0-4.0b/1/ G/D.900-B/V-5/-B/02B/SD-1 Transducer Kit - Stainless SteelDPI/--0-4.0b/1/ G/D.900-B/V-5/-B/02B/SD-1
The transmitter is made of 1.4404 Stainless Steel.
In stock
Free Standard Delivery
-
MAG3-97924462
Grundfos - Magna3 D 40-60F Variable Speed Circulator - Twin HeadDN40 flanged, twin-head, high efficiency, variable speed, light commercial circulator pump with advanced control options.
In stock
Free Standard Delivery
-
GR-99415696
Grundfos - ALPHA1 15-50 N 130 Hot Water Circulator - 240V - Cast IronALPHA1 15-50 N 130
Grundfos ALPHA1 high-efficiency circulator pumps are designed for circulating liquids in heating systems. The stainless-steel variant of ALPHA1 is appropriate for, for example, domestic hot-water systems. With an energy efficiency index (EEI) at the ErP benchmark for most high-efficiency pumps, it contributes to energy savings.
The pump can operate in proportional-pressure, constant-pressure and constant-curve mode. The control mode is selected using the button on the display. The LEDs indicate the operating status, actual power consumption in watts as well as warnings and alarms.
The design and materials of the pump contribute to a long service life. The pump is self-venting through the system, which contributes to straightforward commissioning. The space-efficient design, featuring a pump head with an integrated control box, fits into most common installations. The pump and motor form an integral unit without a shaft seal. The bearings are lubricated by the pumped liquid. These design features ensure maintenance-free operation.
Pump housings made of Cast Iron are electrocoated to improve corrosion resistance. The motor is a synchronous permanent-magnet/space-efficient-stator motor characterised by high efficiency. Pump speed is controlled by an integrated frequency converter incorporated in the control box.
Pumps are supplied with insulating shells to minimise heat loss in heating systems.
Suitable for: Commercial heating, Domestic heating, Domestic hot water recirculation
In stock
Free Standard Delivery
-
MAG3-97924258
Grundfos - Magna3 32-100 F Circulator Pump - 230VThe Grundfos MAGNA3 is a circulator pump with permanent magnet motor that will fit both heating, cooling and domestic hot water circulation applications perfectly, making it the obvious choice for almost any building project – old or new.
In stock
Free Standard Delivery
-
MAG3-97924450
Grundfos - Magna3 D 32-60 Variable Speed Circulator Pump - Twin HeadThe Grundfos MAGNA3 is a circulator pump with permanent magnet motor that will fit both heating, cooling and domestic hot water circulation applications perfectly, making it the obvious choice for almost any building project – old or new.
In stock
Free Standard Delivery
-
96893770
Grundfos - CIMM 300 Modbus Interface ModuleCommunication interface for BACnet MS/TP
- for building automation
The CIM 300 is a standard interface for data transmission between a BACnet MS/TP network and a Grundfos pump unit or controller. It makes data exchange possible between Grundfos pumping systems and a Building Management assembly or a supervisory controller.
The communication interface is based on standard BACnet object types, allowing for straight forward data access over the network.
The BACnet functional profile has been optimized for exchanging data between pumping systems and building management systems / operator workstations.
The CIM 300 is an add-on communication module installed internally in the Grundfos product.
Supported products:
- LC 2x1 Level controller
- CU 352 MPC controller, Hydro Multi-E based on MGE model H/I/J
- MAGNA3 circulators
- E-pump types CRE/CRNE/CRIE, MTRE, CME, TPE2 / TPE3, NBE/NKE with MGE variant H/I/J and 11-22kW
Transmission speeds (BACnet): 9.6 / 19.2 / 38.4 / 76.8 kbps
Suitable for: Commercial heating, Commercial air conditioning, Commercial water pressure boosting, Industrial water supply and transfer, Industrial wastewater treatment and reuse, Surface water intake, Water distribution, Solar water solutions, Community water supply, Wastewater transport, Wastewater treatment
In stock
Free Standard Delivery


















