-
96495696
Grundfos - TPD Blanking PlateProduct name: Blanking flange
This is a Grundfos Spares/Replacement item used for servicing and replacing compatible pump equipment.
Grundfos (est. 1945) is a Danish pump manufacturer known for high-efficiency circulators, multistage boosters, borehole and wastewater pumps, plus packaged pressure systems. The range covers HVAC circulation, domestic hot water recirculation, pressure boosting, industrial water transfer and public water management, with strong focus on energy efficiency and intelligent controls.
In stock
Free Standard Delivery
-
339124
Grundfos - Coupling KitGrundfos - Coupling Kit
This is a Spares/Kit item, please get in touch for product compatibility.
Grundfos (est. 1945) is a Danish pump manufacturer known for high-efficiency circulators, multistage boosters, borehole and wastewater pumps, plus packaged pressure systems. The range covers HVAC circulation, domestic hot water recirculation, pressure boosting, industrial water transfer and public water management, with strong focus on energy efficiency and intelligent controls.
In stock
Free Standard Delivery
-
96536460
Grundfos - CRN 45-7 Vertical Multi-Stage Pump - Stainless SteelCRN 45-7 A-F-H-E-HQQE
Vertical, multi-stage centrifugal pump unit with inlet and outlet ports on same the level (inline). Pump materials in contact with the liquid are in high-grade Stainless Steel. A cartridge shaft seal ensures high reliability, safe handling, and straightforward access and service. Power transmission is via a rigid split coupling. Pipe connection is via DIN flanges. The pump is equipped with a 3-phase, fan-cooled asynchronous motor.
Suitable for: Commercial heating, Commercial air conditioning, Commercial water pressure boosting, District heating, District cooling, Machining, Industrial cleaning process, Process liquids transfer, Industrial heating, Industrial cooling, Industrial water supply and transfer, Industrial wastewater treatment and reuse, Industrial process water treatment, Desalination, Reverse osmosis, Surface water intake, Drinking water treatment, Water distribution, Irrigation, Solar water solutions, Community water supply
In stock
Free Standard Delivery
-
GR-98333860
Grundfos - Magna3 D 32-60F Circulator Pump - 220mm - Stainless SteelMAGNA3 D 32-60 F
The Grundfos MAGNA3 D circulator pump is the well-suited choice for almost any building project – old or new. With its unrivalled energy efficiency, all-encompassing range and built-in communication capabilities, MAGNA3 D is well-suited for engineers and specifiers looking to create high-performance heating and cooling systems. The pump is maintenance-free due to the canned-rotor type design. This also means that pump and motor form an integral unit without shaft seal and with only two gaskets for sealing. The bearings are lubricated by the pumped liquid. MAGNA3 D offers three multipump modes: Alternating, backup and cascade operation.
In alternating and backup operation, only one pump operates at a time to ensure constant comfort. In alternating operation, the change from one pump to the other depends on time or energy. If a pump fails, the other pump will take over automatically. In backup operation, the backup pump is operated at intervals to prevent seizing. If the duty pump stops due to a fault, the backup pump will start automatically. In cascade operation, the pumps automatically switch on and off, adapting to the current consumption in the system. The two pumps communicate wirelessly. MAGNA3 D features an intuitive display and allows you to connect wirelessly with the Grundfos GO Remote app, giving you access to enhanced reporting and monitoring. MAGNA3 model E has Bluetooth, which allows you to connect directly to the Grundfos GO app on your smart phone without any need for a dongle. The pump includes fieldbus communication via CIM modules as well as analogue and digital inputs and configurable relays. Control features include AUTOADAPT and FLOWADAPT. FLOWADAPT reduces the need for throttling valves, thus cutting costs on system components. MAGNA3 D is the superior choice for a wide range of heating and cooling applications, including:
MAGNA3 D is a single-phase pump characterised by the controller and display being integrated in the control box. The pump also has a built-in differential pressure and temperature sensor. The pump housing is available in both cast-iron and stainless-steel versions. The composite rotor can is carbon-fibre reinforced, the bearing plate and rotor cladding are made of Stainless Steel and the stator housing is made of aluminium. The power electronics are air-cooled. MAGNA3 incorporates a 4-pole synchronous, permanent-magnet motor (PM motor). This motor type is characterised by higher efficiency than a conventional asynchronous squirrel-cage motor. The pump speed is controlled by an integrated frequency converter.- small chiller applications
- ground-source heat pump systems
- air conditioning surfaces
- heating surfaces
- mixing loops
Suitable for: Commercial heating, Commercial air conditioning, District heating, District cooling, Domestic heating, Industrial heating
In stock
Free Standard Delivery
-
98950231
Grundfos - SSR2-2.0 CN Negative Shower Pump - Single Impeller - Stainless SteelSSR2-2.0 CN
Grundfos SSR2-2.0 CN is a regenerative shower pump with universal head and one impeller. This pump is the result of extensive research and development, resulting in a high-performance pump at an affordable price. The shower pump is continuously rated as a regenerative pump making it equipped to overcome air pockets and well-suited where the plumbing route includes multiple bends and elbows. The shower pump is used for boosting either hot or cold water to single showers or uncomplicated bathroom suites where the outlets are above or below the cold-water tank.
This high-performance composite shower pump has an modernised design, and by incorporating a low-speed induction motor, it improves durability and ensures a long life. This design ensures minimal turbulence in the pump head. The pump is supplied with a adaptable and braided Stainless Steel connection hose making it resistant to corrosion. Anti-vibration feet, long-life carbon graphite and high-density ceramic seals ensure that the operating noise is held at a minimum. The shower pump has built-in thermal protection, which immediately stops the pump motor if it overheats.
The shower pump is a WRAS-approved product and as such the whole product has undergone and passed extensive mechanical and water quality testing. Additionally, this pump is a regenerative pump making it equipped to overcome air pockets.
- WRAS-approved product
- Anti-vibration feet for minimum operating noise
- Stainless Steel adaptable connection hose
- Long-life carbon graphite and high-density ceramic seals
- Continuously-rated regenerative pump (used in the UK)
- Low-speed and quiet induction motor for increased durability
- Regenerative impeller design to overcome air pockets
- Integrated thermal protection
In stock
Free Standard Delivery
-
99221256
Grundfos - MAGNA 1C 32-100N Circulator Pump - 230V - Stainless SteelMAGNA1 32-100 N
The Grundfos MAGNA1 circulator pump is the uncomplicated option for a job well done. With its high energy efficiency, the product complies with the EuP 2015 regulations, ensuring substantial savings on electricity. With its intuitive, user-friendly interface and maintenance-free design, MAGNA1 is the well-suited circulator pump for basic performance needs in applications where basic system control and monitoring are desired.
With this range of circulator pumps, everything from setup to basic control and monitoring are made straightforward. The pump is maintenance-free due to the canned-rotor type design. MAGNA1 offers the possibility of monitoring the pump via the fault relay output. The digital start and stop input remotely controls the pump. The pump communicates wirelessly with the Grundfos GO Remote app. MAGNA1 can work as the main pump in both heating and cooling applications, including:
- small chiller applications
- ground-source heat pump systems
- air-conditioning surfaces
- heating surfaces
- mixing loops
MAGNA1 is a single-phase pump characterised by the controller and operating panel being integrated in the control box. The pump housing is available in both cast-iron and stainless-steel versions. The composite rotor can is carbon-fibre reinforced, the bearing plate and rotor cladding are made of Stainless Steel and the stator housing is made of aluminium. The power electronics are air-cooled.
The pump incorporates a 4-pole synchronous, permanent-magnet motor (PM motor). This motor type is characterised by higher efficiency than a conventional asynchronous squirrel-cage motor. The pump speed is controlled by an integrated frequency converter.
Suitable for: Domestic hot water recirculation
In stock
Free Standard Delivery
-
97515032
Grundfos - CM 3-6 A-R-I-E-AQQE C-A-A-N Horizontal Booster Pump - 240V - OBSOLETE - Stainless SteelCM 3-6 A-R-I-E-AQQE C-A-A-N
space-efficient, dependable, horizontal, multi-stage, end-suction centrifugal pump unit with axial suction port and radial discharge port. Pump materials in contact with the liquid are in Stainless Steel. The mechanical shaft seal is a specially engineered, unbalanced O-ring seal. All pipework connection is via internal Whitworth pipe threads, Rp (ISO 7/1). The pump is equipped with a 1-phase, foot-mounted, fan-cooled asynchronous motor.
Suitable for: Commercial heating, Commercial air conditioning, Commercial water pressure boosting, District heating, Domestic water pressure boosting, Industrial cleaning process, Industrial heating, Industrial water supply and transfer, Desalination, Water distribution, Irrigation, Community water supply
Out Of StockFree Standard Delivery
-
SGR-96500020
Grundfos - Magna UPE 50-120 Termin.al Box and InverterGrundfos - Magna UPE 50-120 Termin.al Box and Inverter
This is a Spares/Kit item, please get in touch for product compatibility.
Grundfos (est. 1945) is a Danish pump manufacturer known for high-efficiency circulators, multistage boosters, borehole and wastewater pumps, plus packaged pressure systems. The range covers HVAC circulation, domestic hot water recirculation, pressure boosting, industrial water transfer and public water management, with strong focus on energy efficiency and intelligent controls.
In stock
Free Standard Delivery
-
GR-539703/FLANGE-30-16
Grundfos - 1¼" BSP PN10/16 Screwed Flange Set - 32mmGrundfos - 1¼" BSP PN10/16 Screwed Flange Set - 32mm
This is a Spares/Kit item, please get in touch for product compatibility.
Grundfos (est. 1945) is a Danish pump manufacturer known for high-efficiency circulators, multistage boosters, borehole and wastewater pumps, plus packaged pressure systems. The range covers HVAC circulation, domestic hot water recirculation, pressure boosting, industrial water transfer and public water management, with strong focus on energy efficiency and intelligent controls.
In stock
Free Standard Delivery
-
GR-559801/FLANGE-65-16
Grundfos - 2½" BSP PN10/16 Screwed Flange Set - 65mmGrundfos - 2½" BSP PN10/16 Screwed Flange Set - 65mm
This is a Spares/Kit item, please get in touch for product compatibility.
Grundfos (est. 1945) is a Danish pump manufacturer known for high-efficiency circulators, multistage boosters, borehole and wastewater pumps, plus packaged pressure systems. The range covers HVAC circulation, domestic hot water recirculation, pressure boosting, industrial water transfer and public water management, with strong focus on energy efficiency and intelligent controls.
In stock
Free Standard Delivery
-
GR-569802/FLANGE-80-16
Grundfos - 3" BSP PN10/16 Screwed Flange Set - 80mmGrundfos - 3" BSP PN10/16 Screwed Flange Set - 80mm
This is a Spares/Kit item, please get in touch for product compatibility.
Grundfos (est. 1945) is a Danish pump manufacturer known for high-efficiency circulators, multistage boosters, borehole and wastewater pumps, plus packaged pressure systems. The range covers HVAC circulation, domestic hot water recirculation, pressure boosting, industrial water transfer and public water management, with strong focus on energy efficiency and intelligent controls.
In stock
Free Standard Delivery
-
GR-579801/FLANGE-100-16
Grundfos - 4" BSP PN10/16 Screwed Flange Set - 100mmGrundfos - 4" BSP PN10/16 Screwed Flange Set - 100mm
This is a Spares/Kit item, please get in touch for product compatibility.
Grundfos (est. 1945) is a Danish pump manufacturer known for high-efficiency circulators, multistage boosters, borehole and wastewater pumps, plus packaged pressure systems. The range covers HVAC circulation, domestic hot water recirculation, pressure boosting, industrial water transfer and public water management, with strong focus on energy efficiency and intelligent controls.
In stock
Free Standard Delivery
-
98296612
Grundfos - Impeller - 98296612Grundfos - Impeller - 98296612
This is a Spares/Kit item, please get in touch for product compatibility.
Grundfos (est. 1945) is a Danish pump manufacturer known for high-efficiency circulators, multistage boosters, borehole and wastewater pumps, plus packaged pressure systems. The range covers HVAC circulation, domestic hot water recirculation, pressure boosting, industrial water transfer and public water management, with strong focus on energy efficiency and intelligent controls.
In stock
Free Standard Delivery
-
96416580
Grundfos - Bottom Bearing Kit - 96416580Grundfos - Bottom Bearing Kit - 96416580
This is a Spares/Kit item, please get in touch for product compatibility.
Grundfos (est. 1945) is a Danish pump manufacturer known for high-efficiency circulators, multistage boosters, borehole and wastewater pumps, plus packaged pressure systems. The range covers HVAC circulation, domestic hot water recirculation, pressure boosting, industrial water transfer and public water management, with strong focus on energy efficiency and intelligent controls.
In stock
Free Standard Delivery
-
MAG1C-99221223
Grundfos - MAGNA1 25-40N Variable Speed Circulator Pump - 180mm - 230V1 1/2" threaded, single-head, high efficiency, variable speed, light commercial circulator pump
In stock
Free Standard Delivery
-
97924267
Grundfos - Magna3 40-60F Variable Speed Circulator - 240V - Cast IronMAGNA3 40-60 F
The Grundfos MAGNA3 circulator Pump is the ideal choice for almost any building project – old or new. With its unrivalled energy performance, all-encompassing range and built-in communication capabilities, MAGNA3 is ideal for engineers and specifiers looking to create elevated-output heating and cooling installations. The Pump is maintenance-free due to the canned-rotor type design. This also means that Pump and motor form an integral device without shaft seal and with only two gaskets for sealing. The bearings are lubricated by the Pumped liquid. MAGNA3 features an intuitive display and allows you to connect wirelessly with the Grundfos GO Remote app, giving you access to next‑gen reporting and monitoring. MAGNA3 model E has Bluetooth, which allows you to connect directly to the Grundfos GO app on your smart phone without any need for a dongle. The Pump includes fieldbus communication via CIM modules as well as analogue and digital inputs and configurable relays. Management features include AUTOADAPT and FLOWADAPT. FLOWADAPT reduces the need for throttling valves, thus cutting costs on installation components. MAGNA3 is the superior choice for a wide range of heating and cooling applications,
- Suitable for Commercial heating,
- This product's housing material is Cast Iron
- The impeller is manufactured from Composite
- Maximum operating pressure: 10 Bar.
- Temperature liquid range: -10 .. 110 °C.
- Approvals include CE,VDE,EAC,MOROCCO,UKCA,TSE,RCM,UkrSEPRO
In stock
Free Standard Delivery















